• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.139-145
• /
• 2006

This paper presents the design and manufacturing of a sensor using SAW and delay line in order to measure temperature. SAW sensors having single and double electrodes are manufactured on the $128^{\circ}YX-LiNbO_3$ substrate, and its process is addressed. Before manufacturing, the device is simulated using a commercial finite element program. The frequency responses of the saw sensor on the temperature change is measured. Since the center frequency on the temperature change from $-30^{\circ}C$ to $80^{\circ}C$ is linearly changed, the saw sensor is applicable to measure the temperature change or strain variation.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1985-1991
• /
• 1999

본 논문은 HANbit ACE64 ATM 교환기 시스템의 데이터 경로인 IMI(Inter Module Path)에 사용되는 고속 전송선로인 Twinax 케이블을 two-port lumped Spice-network 모델로 구현하기 위해 lumped 네트워크 요소와 수학적 함수를 사용하여 개발하였다. 사용된 요소들은 저항성분과 주파수의존 전압제어 소스로 구성되어 있고 Hspice 수학적 함수인 FREQ, DELAY, POLY를 사용하여 구현하였다. 구현된 모델을 사용하여 케이블 길이와 종류에 따른 각종 노이즈 분석을 실시하여 그 특성을 비교 분석하였다.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.563-567
• /
• 2018

We propose and experimentally demonstrate a simple tunable photonic microwave band-pass filter with high resolution using a reflective semiconductor optical amplifier (RSOA) and an optical time-delay line. The RSOA is used as a gain medium for generating cross-gain modulation (XGM) effect as well as an optical source. The optical source provides narrow spectral width by self-injection locking the RSOA in conjunction with a partial reflection filter with specific center wavelength. Then, when the RSOA is operated in the saturation region and the modulated recursive signal is injected into the RSOA, the recursive signal is inversely copied to the injection locked optical source due to the XGM effect. Also, the tunability of the passband of the proposed microwave filter is shown by controlling an optical time-delay line in a recursive loop.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.389-393
• /
• 2008

This paper describes a single-server queue where the server is unavailable during some intervals of time, which is referred to as vacations. The major contribution of this work is to derive general formulas for the additional delay in the vacation models of the single vacations, head of line priority queues with non-preemptive service, and multiple vacations and idle time.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.169-171
• /
• 2002

Ethernet PON(Passive Optical Network)은 지금까지 연구되고 있는 가입자 망 가운데 인터넷 트래픽에 가장 적합한 모델이다. 본 논문에서는 Ethernet PON의 성능분석을 위해서 OPNET을 이용하여 Ethernet PON 시뮬레이션 모델을 설계 및 구현한다 또한, 이 모델에 대한 End to end Ethernet delay, Queuing delay, Throughput과 Utilization 분석을 통해서 하나의 OLT(Optical Line Termination)가 수용 할 수 있는 최적의 ONU(Optical Network Unit) 개수를 산정하고 Ethernet PON을 설치할 때 망의 효율을 극대화하는 방안을 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.699-703
• /
• 1993

When the error path can be modeled as a pure delay, an adaptive algorithm for slowly time varying system is proposed to minimize the sound pressure level. This algorithm makes it possible to use the fittered-x LMS algorithm with on-line delay modeling of the error path. Another simple adaptive algorithm for pure tone noise is proposed which eliminates the cross term in the multiple error filtered-x LMS algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.526-529
• /
• 1998

This paper describes new sense amplifier with fast sensing delay time of 0.54ns and 32kb CMOS embedded SRAM with 4.67ns access time for a 3-V powr supply. It was achieved using the sense amplifier with multiple point sensing scheme and high speed bit-line scheme. The sense amplifier saves 25% of the power dissipation compared with the conventional one while maintaining a very short sensing delay. The SRAM uses 0.5.mu.m double-polysilicon and triplemetal CMOS process technology. A die size is 1.78mm*2.13mm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.76.5-76
• /
• 2001

This paper considers the parameter estimation for the state-space model based time-delay systems in the case that the Lyapunov stability of the system is guaranteed. In order to estimate the parameters, two estimation methods can be proposed which are known as the parallel model and the series parallel model. It is shown that the parameters can be estimated using each method, and also certied that the results are correct by simulations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.975-978
• /
• 1999

The transmission line effects of IC interconnects have a substantial effect on a hish-speed VLSI circuit performance. The effective transmission lime parameters are changed with the increase of the operation frequency because of the skin of the skin effect, proximity effect, and silicon substrate. A new signal delay estimation methodology based on the RLC-distributed circuit model is presented ［2］. The methodology is demonstrated by using SPICE simulation and a high-frequency experiment technique.