• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.398-401
• /
• 2001

There are two methods to calculate design sensitivity such as direct differentiation method and adjoint method. A sort of direct differentiation method for design sensitivity analysis costs too much when number of design variables is much larger than the number of response functions whose design sensitivity analyses are required. Therefore, an adjoint method is suggested for the case that the dimension of design variables is lager than the number of response function. An adjoint method is required to compute adjoint variables from the simultaneous linear system equation, the so-called adjoint equation, requiring only the eigenvalue and its associated eigenvectors for mode being differentiated. This method has been extended to the repeated eigenvalue problem. In this paper, we propose an adjoint method for deign sensitivity analysis of damped vibratory systems with distinct eigenvalues.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.15-24
• /
• 2000

An intelligent software system which can support efficiently and systematically machine tool design by utilizing deign knowledge is described in this paper. The process of embodiment design of a machining center was modelled represented by IDEF0 and embedded in the system. A hybrid type inference engine has been introduced so that the system can effec-tively deal with knowledge represented in diversified forms The design system was developed on the basis of object-ori-ented programming and has been coded into one software system which can be ported on Windows NT.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.19-22
• /
• 2003

In this study, the design of prestressed die for spur gear forging have been investigated. The stress concentration at notch of the die insert is very important in the design of die for the forging of spur gear such as non-axisymmetric geometry. In the previous study, the flexible tolerance method was used in order to search the optimal value of design variables considering the constrain conditions. In the design process, it was also involved the safety factor to the yield strength of each ring by considering allowable tensile or compressive hoop stress in each ring. Using this technique, the die deign for spur gear forging has been successfully performed without yielding of the die after shrink fitting and during forging.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.477-484
• /
• 2005

Purpose: The purpose of this study was to evaluate effect of Thera-Band stretching exercise on flexibility of shoulder joint. Methods: The research deign was a experimental pre-post control group design. Sixteen subject were randomly divided into two groups; experimental group(n=8) and control group(n=8). Experimental group performed Thera-Band PNF stretching for 4 weeks and control group was not performed. To compare with the effectiveness of Thera-Band PNF stretching between two groups, I measured flexibility of shoulder joint with an Apley scratch test. The data were analyzed by Independence T-test. Results: The experimental group was significantly increased the flexibility at the right and left shoulder internal rotation. But the experimental group was not significantly increased the flexibility at the right and left shoulder external rotation. Conclusion: These result suggest that home-based exercise programs with Thera-Band can serve as a practical and effective means of flexibility gains in general people.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.308-313
• /
• 2018

In this paper, we propose a sampled-data model predictive tracking control deign for leader-following control of multi-mobile robot system. The error dynamics of leader-following robots is modeled as a Linear Parameter Varying (LPV) model. Also, the Lyapunov function is presented to guarantee stability of the networked control system. Based on the stabilization condition using a quadratic Lyapunov function approach, model predictive sampled-data controller is designed. Finally, the leader-following control of multi mobile robots is simulated to show effectiveness of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.334-338
• /
• 2009

In this paper, We report the miniaturization of superconducting microwave power dividers based on lumped element equivalent circuits. To do this, we analyzed a conventional branch-type power divider by using an ABCD matrix under even and odd mode excitation. Then, we calculated each lumped element impedance throughout this analysis of a transmission line matrix. Also we simulated our equivalent circuits made of lumped elements by using a full wave analysis, em Sonnet. Our deign of microwave power divider based on simulated results was fabricated on high-$T_c$ superconducting thin films deposited on MgO substrate. Experimental results were reported in terms of bandwidth, center frequency, and phase difference between $S_{21}$ and $S_{31}$. We confirm that our design will be useful in the future microwave power systum.

• Korean Institute of Interior Design Journal
• /
• no.26
• /
• pp.72-78
• /
• 2001

The purpose of this study is to develop the color palettes which are applicable to the color deign process for residential interiors according to the image types. To achieve this purpose, review of literature, questionnaire survey, and contents analysis were used. The major results of this study are as follows : The interior color images are clearly divided into 4 types, such as 'sophisticated', 'natural', 'gorgeousl', and 'casual'From the results of color palette, these 4 color image types are found to be very closely related to the interior image. It means that color image is very important element in Interior design process. Therefore, it is helpful to plan the color design according to the image types of interior color for good interior design.

• Journal of the Korean Society of Combustion
• /
• v.20 no.3
• /
• pp.27-34
• /
• 2015

The objective of the current study is to introduce detailed process for a preliminary combustor design, and to develop a computer code for it. The program includes various empirical and semi-empirical methodologies for diffuser deign, combustor sizing, air distribution, and sub-component design such as primary and secondary zones. Using the developed program, the combustor sizing results are shown from an assumption of simple annual combustor cycle analysis. Two options are employed, 1) pressure loss approach, and 2) velocity assumption approach. Design results show that there are no significant differences in combustor sizing between two design options. Further code improvement is required for performance and emission evaluations of the designed combustor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.641-642
• /
• 2011

This paper presents method of constructing the embedded systems based on hardware-software codesign which is the important fields of $21^{st}$ information technology. First, we describe the classification and necessity of embedded systems, and we discuss the consideration and classification for constructing the embedded systems. Also, we discuss the embedded systems modeling. The proposed embedded systems based on hardware-software co-design is important gradually, we expect that it involve the many IT fields in the future.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.56-63
• /
• 2008

Many advanced nations have been developing the next generation logistic systems to effectively deal with gradually increased logistic flows over the world. Particularly, dual mode trailer(DMT) systems are significantly focused as a new alternative transportation which basically provides integrating of the land and railroad services. This paper presents new driving mechanism for DMT systems using the hydraulic pressure cylinder systems. Such is mechanically composed of supporting and rotating parts independently, which are mostly important for whole system performance. We analyze feasible operational problem occurred in driving mechanism from the conventional DMT systems and compare our proposed deign specification with the Modalohr DMT system to demonstrate its reliability and practicability.