• 아동학회지
• /
• 제35권4호
• /
• pp.263-279
• /
• 2014

The purpose of this paper is to explore the role of the variation of songs by teachers in early childhood classrooms where songs play an important role in managing the daily activities for young children. Early childhood teachers have demonstrated a high degree of competency to transform and modify a variety of songs that fit into children's developmental levels. The use of such songs enable both teachers and young learners to fully enjoy such classroom activities and are an important means for establishing rapport. The data were collected from direct observation and video recording in three early childhood classrooms, as well as through interviews with the teachers, and through the researcher's journals. The results of the study revealed that the teachers exhibit a high degree of professionalism in creating variations of the kind of songs that children seem to enjoy, and thereby creating high levels of classroom enjoyment generally. This study also showed that using a good variety of songs in early childhood classroom can facilitate understanding of the content in the curriculum Finally, this study also suggests that the teachers' skills in designing variations of songs can make early childhood education classrooms culturally attractive and aesthetically more creative.

• 한국가정과교육학회지
• /
• 제6권2호
• /
• pp.85-108
• /
• 1994

This study intends to provide sources which enable students to satisfy uniform design as I surveyed preferable uniform design and degree of satisfaction of uniform design to students. The subjects were gathered into 91 middle-high schools and surveys were done among 400 school girls. The results are as follows; 1)The survey of uniform which students wear. For jacket, tailored collar which is single breasted is most common and for blouse, puff sleeve, soutein collar, shirt collar is common. For skirt, lastly, they usually wear side pleats skirt. 2) Thoughts of uniform students preferred uniform to casual. The merit of wearing uniform can represent themselves as the ‘students’on the other hand, the demerit is shown that uniform is inconvenient enough to move. 3)Preference of uniform design. Students prefer tailored jacket, shirt blouse, flare skirt. Basing on these results above, I’d like to suggest something about uniform. The demerit of wearing uniform lies in inconvenience. It would weaken the degree of satisfaction of uniform and have a negative influence on students in physical and mental side. So we have to find out the concrete problems, at the same time, develop measurable study which fit for body. Adolescence is period of developing and establishing self. So they really need rather creative educational atmosphere than stereo typed-control. Reflecting this opinion, Clothing habits can play an important role and in future it is desirable to have students wear not uniform but casual.

• 한국의류학회지
• /
• 제36권11호
• /
• pp.1186-1196
• /
• 2012

This study investigated the garments of middle-aged women undergoing menopause and their satisfaction with them. Data were collected through a survey of 288 middle-aged women and analyzed using SPSS 17.0. As a result (in terms of degree of symptoms) backache, arthralgia, muscular pain and heat sensation were indicated as significantly more outstanding in the menopause group rather than the menopausal transition group. As a countermeasure to physiological symptoms, a change of temperature (warming or cooling) was applied for backache and arthralgia as well as taking medicine for stomachaches and muscular pain. Body parts suffering from heat sensations were the face, back neck, chest center, waist and hip. Body parts suffering from arthralgia and muscular pain were the shoulder and hip joints. The most significant purchasing factor for menopausal women was the fit of outerwear and antibiosis in underwear; however, women not undergoing menopause selected comfortableness when moving as the most important factor. In terms of body shaping and thermoregulation function, the satisfaction degree in underwear was significantly different between the two groups. Menopausal women wanted functional underwear that provided functions such as thermoregulation, absorption of secretions, and antibiosis.

• 한국전산유체공학회지
• /
• 제16권3호
• /
• pp.75-81
• /
• 2011

The turbo blowers having large power capacity are generally composed of the variable inlet guide vane, the impeller and the variable diffuser. In the present study, the effect of the stagger angles on the aerodynamic performances has been investigated by CFD methods. The design specifications of the reference model having 400kW power were given as 7.43kg/s of mass flow rate, 1.66 of pressure ratio with 12000rpm of impeller rotating speed. As the first simulation parameter, the diffuser vane angle was varied in the range of ${\pm}$20 degree from the initial-design point. The inlet guide vane angles, as the second one, was changed in the range of ${\pm}$40 degree from the initial-design point. The commercial Navier-Stokes solver, ANSYS-CFX, was applied to solve the three-dimensional unsteady flow fields inside the turbo blower. Through the numerical results, the desirable setting angles were proposed to fit the best performance to the variation of the operating conditions.

• Journal of Information Processing Systems
• /
• 제10권3호
• /
• pp.395-411
• /
• 2014

Temporal medical data is often collected during patient treatments that require personal analysis. Each observation recorded in the temporal medical data is associated with measurements and time treatments. A major problem in the analysis of temporal medical data are the missing values that are caused, for example, by patients dropping out of a study before completion. Therefore, the imputation of missing data is an important step during pre-processing and can provide useful information before the data is mined. For each patient and each variable, this imputation replaces the missing data with a value drawn from an estimated distribution of that variable. In this paper, we propose a new method, called Newton's finite divided difference polynomial interpolation with condition order degree, for dealing with missing values in temporal medical data related to obesity. We compared the new imputation method with three existing subspace estimation techniques, including the k-nearest neighbor, local least squares, and natural cubic spline approaches. The performance of each approach was then evaluated by using the normalized root mean square error and the statistically significant test results. The experimental results have demonstrated that the proposed method provides the best fit with the smallest error and is more accurate than the other methods.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.653-661
• /
• 2020

The paper presents a study regarding rubber compressibility behavior. The objective is to analyze the effect of compression degree of rubber on its mechanical properties and propose a new methodology based on reverse engineering to predict compressibility degree based on uniaxial stretching test and Finite Element Analysis (FEA). In general, rubbers are considered to be almost incompressible and Poisson's ratio is close to 0.5. Since this property is intimately related to the rubber packing density, little changes in Poisson's ratio can lead to significant changes regarding mechanical behavior. The deviatory hyperelastic constants were obtained through experimental data fitting by least squares method for the most relevant constitutive models implemented in commercial software Abaqus, such as: Neo-Hooke, Mooney-Rivlin, Ogden, Yeoh and Arruda-Boyce, whereas the hydrostatic part was determined through an optimization algorithm implemented in the Abaqus environment by Python scripting. The simulation results presented great influence of the Poisson's ratio in the rubber specimen mechanical behavior mainly for high strain levels. A conventional pure volumetric compression test was also carried out in order to compare the results obtained by the proposed methodology.

• 벤처혁신연구
• /
• 제3권2호
• /
• pp.41-76
• /
• 2020

본 연구는 스마트팩토리 도입의도에 영향을 미치는 요인을 실증 분석을 통해 확인하였다. 4차산업혁명의 핵심분야인 스마트팩토리 도입에 있어서 어떤 요인이 중요하게 영향을 미치는가에 대한 연구이며, 아직까지 스마트팩토리 분야에서 기술 수용에 관한 연구가 부족한 상황에서 학술적 실무적 의의가 있다고 믿는다. 정보기술의 수용요인 연구에 설명력이 검증된 통합기술수용이론(UTAUT)을 기반으로 연구를 진행하였으며, UTAUT 이론의 4가지 독립변수인 성과기대, 노력기대, 사회적영향, 촉진조건에 추가로 스마트팩토리의 특성상 중요한 요인으로 예상되는 정부지원기대(Government Assistance Expectancy)를 독립변수에 추가하였다. 또한 스마트팩토리 기술수용의 기술적인 요인을 확인하고자 과업기술적합도(Task Technology Fit)변수 추가하여 스마트팩토리 도입의도에 미치는 영향관계를 실증 분석하였다. 또한 과업기술적합도의 선행변수인 과업특성(Task Characteristics)과 기술특성(Technology Characteristics)이 과업기술적합도에 어떠한 영향을 미치는지에 대한 분석도 진행하였다. 새로운 기술에 대한 신뢰(Trust)의 정도가 기술의 수용에 있어 매우 중요한 영향을 미칠 것으로 예상되어 신뢰를 매개변수로 추가하였다. 마지막으로 새로운 정보기술에 의한 혁신이 사용자에게 불가피하게 거부감을 야기할 수 있다는 선행연구들을 토대로 혁신저항(Innovation Resistance)을 조절역할을 하는 연구변수에 추가하여 실증적 검증을 진행하였다. 연구 결과 성과기대, 사회적 영향, 정부지원기대, 과업기술적합도는 스마트팩토리 도입의도에 정(+)의 영향을 미쳤다. 영향력의 크기는 정부지원기대(β=.487) > 과업기술적합도(β=.218) > 성과기대(β=.205) > 사회적영향(β=.204) 순으로 나타났다. 과업특성과 기술특성은 모두 과업기술적합도에 정(+)의 영향이 확인되었으며, 과업특성(β=.559)이 기술특성(β=.328)보다 과업기술적합도에 더 영향이 큰 것으로 나타났다. 신뢰에 대한 매개 효과 검정에서 6개 독립변수 각각과 스마트팩토리 도입의도 간에 신뢰의 통계적으로 유의미한 매개역할은 확인되지 않았다. 혁신저항의 조절효과 검정을 통해, 혁신저항이 정부지원기대와 스마트팩토리 도입의도 간 정(+)의 조절역할을 하는 것으로 나타났다. 즉 혁신저항이 크면 클수록 정부지원기대가 스마트팩토리 도입의도에 미치는 영향력이 혁신저항이 적은 경우보다 커지는 것으로 나타났다.

• 유통과학연구
• /
• 제13권10호
• /
• pp.135-142
• /
• 2015

Purpose - Following the speedy development of the smart phone industry, tourism companies started to increase their brand recognition and sales volume by adopting mobile applications. However, applications for tourism industries are still insignificant. This study tries to analyze empirical evidence from Korean and Chinese consumers who have used mobile tour applications. By using an expansion of the technology acceptance model (TAM), this study will find what factors have effects on user intention for mobile tour applications. The findings will be helpful for the development of mobile tour applications and the tourism industries. Research design, data, and methodology - This study uses the TAM, which was presented by Davis in 1989. This study uses consumer acceptance level, consumer choice attitude, and use intention as the basic variables to fit to the TAM, and adopts choice content quality, brand value, and usage motivation as additional variables to analyze. This study has developed several hypotheses and collected data from 620 users who used mobile applications for tourism during April 1 to April 30, 2015. A total of 612 valid questionnaires were collected and used in the data analysis. The data was analyzed with structural equation modeling using SPSS Win/pc and Amos 22.0. Results - The findings can be summarized as follows: First, the content quality affects the consumer acceptance degree and choice attitude. Second, the brand value has a directly positive effect on the consumer acceptance degree and choice attitude. It is clear that the content quality and brand value play important roles in raising consumer acceptance and choice attitude. Third, usage motivation has no effect on the consumer acceptance degree and choice attitude. Fourth, the acceptance degree does not have any effect on the consumer choice attitude. Fifth, the acceptance degree affects the use intention. Last, the consumer choice attitude affects the use intentions. This indicates that consumer acceptance and choice attitude must both be achieved to induce use intention among consumers. Finally, the effects of the mobile tour application content quality and brand value on consumer acceptance degree and choice attitude were confirmed. Additionally, the effects of the consumer acceptance degree and choice attitude on use intentions were analyzed. Conclusion - It is not meaningful for tourism marketing to launch tour applications in the mobile market without understanding tourism consumer characteristics. When developing mobile tour applications, companies should focus on the characters of consumer choice attitudes as high quality, high brand value, usefulness, and ease of mobile tour applications. This study has limitations in that it did not consider negative factors such as perceived risks or analyze whether there are differences between Korean and Chinese consumers. In the future, we will consider equipping the same mobile tour applications commonly used by both Korean and Chinese consumers, and then examine negative factors as well as the differences in mobile tour applications between Korean and Chinese consumers.

• Journal of Korean Neurosurgical Society
• /
• 제37권3호
• /
• pp.217-222
• /
• 2005

Objective: To achieve optimal fit of implant, it is necessary to bend the implant during spine surgery. Bending procedure may decrease stiffness of plate especially made of titanium and stainless steel. Typically titanium suffers adverse effects including early crack propagation when it is bent. We investigate whether 6 degree bending of titanium plates would decrease the stiffness after full cyclic loading by comparing with non-bending titanium plates group. Methods: Authors experimented 40 titanium alloy plates of 57mm in length, manufactured by 5 different companies. Total 40 plates were divided into two groups (20 bent plates for experimental group and 20 non-bent plates for control group). Twenty plates of experimental group were bent to 6 degree with 3-point bending technique and verified with image analyzer. Using the electron microscope, we sought for a initial crack before and after 3-point bending. Mechanical testing by means of 6000 cyclic axial-compression loading of 35N in compression with moment arm of 35mm-1.1 Nm was conducted on each plate and followed by the electron microscopic examination to detect crack or fissure on plates. Results: The stiffness was decreased after 6000 cyclic loading, but there was no statistically significant difference in stiffness between experimental and control group. There was no evidence of change in grain structure on the electron microscopic magnification. Conclusion: The titanium cervical plates can be bent to 6 degree without any crack or weakness of plate. We also assume that minimal bending may increase the resistance to fatigue fracture in cervical flexion-extension movement.

• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.173-180
• /
• 2012

SiC particles, 8.3 ${\mu}m$ in volume average diameter, were chlorinated in an alumina tubular reactor, 2.4 cm in diameter and 32 cm in length, with reactor temperature varied from 100 to $1200^{\circ}C$. The flow rate of the gas admitted to the reactor was held constant at 300 cc/min, the mole fraction of chlorine in the gas at 0.1 and the reaction time at 4 h. The chlorination was negligibly small up to the temperature of $500^{\circ}C$. Thereafter, the degree of chlorination increased remarkably with increasing temperature until $900^{\circ}C$. As the temperature was increased further from 900 to $1200^{\circ}C$, the increments in chlorination degree were rather small. At $1200^{\circ}C$, the chlorination has nearly been completed. The surface area of the residual carbon varied with chlorination temperature in a manner similar to that with the variation of chlorination degree with temperature. The surface area at $1200^{\circ}C$ was 912 $m^{2}/g$. A simple model was developed to predict the conversion of a SiC under various conditions. A Langmuir-Hinshelwood type rate law with two rate constants was employed in the model. Assuming that the two rate constants, $k_{1}$ and $k_{2}$, can be expressed as $A_{1e}^{-E_{1}/RT}$ and $A_{2e}^{-E_{2}/RT}$, the four parameters, $A_{1}$, $E_{1}$, $A_{2}$, and $E_{2}$ were determined to be 32.0 m/min, 103,071 J/mol, 2.24 $m^{3}/mol$ and 39,526 J/mol, respectively, through regression to best fit experimental data.