• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.121-126
• /
• 1998

A numerical optimization procedure is developed to find the inlet velocity profile that yields the most uniform epitaxial layer in a vertical MOCVD reactor. It involves the solution of fully elliptic equations of motion, temperature, and concentration; the finite volume method based on SIMPLE algorithm has been adopted to solve the Navier-Stokes equations. The overall optimization process is highly nonlinear and has been efficiently treated by the sequential linear programming technique that breaks the non-linear problem into a series of linear ones. The optimal profile approximated by a 6th-degree Chebyshev polynomial is very successful in reducing the spatial non-uniformity of the growth rate. The optimization is particularly effective to the high Reynolds number flow. It is also found that a properly constructed inlet velocity profile can suppress the buoyancy driven secondary flow and improve the growth-rate uniformity.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.89-100
• /
• 1993

The purpose of this study was to evaluate the effect of orthodontic force on periodontal cellular activity by immunoperoxidase stain of epidermal growth factor, one of the tissue hormone. And supplementarily, to investigate of the changes of periodontal structures, periodontium was stained by H-E, Masson's Trichrome, P. A. S. stain after orthodontic force application. The experimental animals were four young adult dogs of average 8 month old. The fixed orthodontic appliance was cemented on mandibular right 4th premolar and 1st molar of each animal as experimental site. Mandibular left 4th premolar area of the same animal was used as control. The appliance consist of two silver crown soldered with 0.030' tube, $0.018\times0.022'$ S.S. sectional arch wire, and 0.009' open coil spring for manifestating of orthodontic force for bodily tooth movement of mandibular 4th premolar toward mesial direction. Experimental group was sacrificed at 1, 2, 3, 5 weeks from beginning of the experiment, and was investigated immunohistochemically and bistochemically by several staining methods. Findings were as follows: 1. The degree of EGF staining in control group was highest in epithelium of periodontium, and osteoclasts, osteoblasts and fibroblasts around the capillary were stained at higher level in periodontium. Generally, control group shows positive distribution of EGF all around the periodontal area. 2. The degree of EGF staining in control and 5 week group were similar, and did not show the significant different level between tension and pressure side. 3. All of 1, 2, 3 week group showed the same staining degree and distribution of EGF, and the tension side was more positive reaction of EGF stain than the pressure side. 4. The features of collagen fiber and periodontal fiber arrangement observed by H-E, Masson's Trichrome and P. A. S. stain revealed that oblique periodontal fibers were strectched in tension side, compressed in pressure side of all experimental group. Some fiber group in pressure side of 5 week group recovered the regular arrangement along the capillaries.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.220-229
• /
• 1992

The degree of purification and the macrostructure of high purity aluminium were studied through the alternate stirring method in order to improve the nonuniformity of solute concentration in the unidirectional stirring method. The $2^3$ factorial design was done to examine the effects of experimental factors more qualitatively. In the relatively low stirring speed of 1500 rpm with alternate stirring mode, the uniform solute profile and refined grain structure were obtained due to strong washing effect and turbulent fluid flow. It was induced by the transition of the momentum boundary layer by alternation of the stirrer. It was concluded from this study that the alternate stirring mode was more effective to obtain the uniformity of solute even in the stirring speed of 1500 rpm. But the degree of purification decreased below the critical alternating period. When 2N(99.8wt.%) aluminium was used as the starting material the morphology of solid-liquid showed the cellular shape and the columnar grains were inclined to the direction of rotation. This inclined grain growth resulted from the difference of relative velocities of solid and liquid. The inclined angle was increased as the stirring speed increased and solidification proceeded. In the case of 4N aluminium, there was no inclined grain growth and it was confirmed from the macrostructure and SEM work that the morphology of solid-liquid interface was planar. From the factorial design, it was found that the alternate stirring mode showed poorer purification effect than that of unidirectional stirring mode at low speed(500 rpm). In addition, the factor that had the most significant effect on the degree of purification was the stirring speed.

• 지역연구
• /
• 제9권1호
• /
• pp.45-63
• /
• 1993

University enrollment has long been regarded as one of the major factors inducing population concentration in Seoul and the Capital Region of Korea. Consequently, since early 1980's increases in enrollment and new establishments of extention universities beyond the boundary of Seoul, has been promoted, while university enrollment quota in Seoul has been strictly controlled. The degree of actual population dispersal, however, resulting from such a university enrollment policy has not been empirically tested. This paper aims at: First, identifying the trend of population growth and evolution process of the university enrollment policy in the Capital Region; Second, comparing the degree of influence of university enrollment on population concetration factors; Third, measuring actual effect of the enrollment control on population dispersal out of Seoul and the Capital Region. Major findings are as follows: First, only a week correlation between population and university enrollment growth trends was found; Second, the relative degree of influence on population concentration in the Capital Region, were order, in the order of magnitude, the physical amenity factor, the socio-cultural amenity factor, the employment climate factor and the educational factor. Third, and most improtant, based on the comparison of spatial distribution of graduated high schools and current residence of the selected university students, the gap between the two distributions was revealed and the inter-regional student population movement was estimated. The result shows that in Seoul's case about one-half of and in Kyunggi Province's case about one-fifth of university enrollment size, contributes to population concentration into Seoul. Fourth, as to the universities outside of the Capital Region, little effect in the case of universities located within the commuting distance, and a little effect on population dispersal in the case of universities located beyond commuting distance, were found. In sum, it seems clear that university enrollment policy in the Capital Region, especially in Inchon/Kyunggi Province has not been effective on student population dispersal out of Seoul and the Capital Region. Therefore, it is strongly recommended that university enrollment policy be throughly re-examined from its goal to the implementation means.

• 급식외식위생학회지
• /
• 제2권2호
• /
• pp.91-96
• /
• 2021

This study was performed to provide fundamental data on hygiene and quality control of ready-to-eat sandwiches. Predictive models were developed to the kinetics of Staphylococcus aureus growth in these sandwiches as a function of temperature (10, 15, 25, and 35℃). The result of the primary model that used the Gompertz equation showed that the lag phase duration (LPD) and generation time (GT) decreased and the exponential growth rate (EGR) increased with increasing storage temperature. The secondary model showed an R² for M and B of 0.9967 and 09916, respectively. A predictive growth model of the growth degree as a function of temperature was developed. L(t)=A+Cexp(-exp(-B(t-M))) (A=Initial contamination level, C=MPD-A, B=0.473166-0.045040*Temp-0.001718*Temp*Temp, M=19.924824-0.627442*Temp-0.004493*Temp*Temp, t=time, Temp=temperature). This model showed an R² value of 0.9288. All the models developed in this study showed a good fit.

• 한국작물학회지
• /
• 제65권4호
• /
• pp.426-435
• /
• 2020

본 연구는 남부지방에서 찰옥수수와 콩의 2모작 직파 표준재배법 확립을 위한 기초자료로 활용하고자 찰옥수수의 유묘기 저온에 따른 생육특성 변화 및 피해양상을 조사하였으며 그 결과는 다음과 같다. 일미찰옥수수 초장은 5℃ 이하 3일 처리구부터 저해가 나타나 모든 처리구에서 22% 이상의 저해율이 조사되었다. 경태도 저온기간이 길어지고, 온도가 낮아질수록 더 짧은 것으로 나타나, 제 2엽기 5℃ 이하 5일 처리구에서 저해율이 27% 이상으로 가장 높게 나타났다. 식생지수(NDVI)에서 저해율은 제 2엽기>제 1엽기>초엽기 순으로 높게 나타났으며, 회복기 저해율에서는 제 2엽기 5℃ 이하 7일 처리구에서 25~82%로 가장 높았다. 광합성능력지수(Fv/Fm)에서도 제 2엽기>제 1엽기>초엽기 순으로 저해율이 높게 조사되었다. 특히, -3℃ 처리구의 저온처리 및 회복기에서 생육특성의 변화가 없거나, 감소하는 것으로 조사되었다. 따라서 5℃ 이하 3일부터 저온기간이 길어지고, 온도가 낮아 질수록 생장이 저해되었고, 그 피해정도는 제 2엽기>제 1엽기>초엽기 순으로 높았다. 모든 유묘기에서 -3℃ 이하에 3일 이상 노출될 경우 생육이 정지되거나, 위조고사 하였다. 한편, 본 실험은 실내에서 수행된 결과이므로 차후 재배지역 적용여부에 대한 면밀한 추가 연구가 수행되어야 할 것으로 사료된다.

• 대한치과교정학회지
• /
• 제19권3호
• /
• pp.123-133
• /
• 1989

To predict the pubertal growth peak in stature and study the skeletal maturity degree using hand-wrist radiograph, the author used the 70 malocclusions (male 24, female 46). After longitudinal measurement of stature and skeletal maturity indicators of hand-wrist radiographs were taken during 4 years, the rsults were as follows. 1) The pubertal growth peak in stature occurred mainly at SMI 6-7 (56.5%) in female, SMI 5-6 (37.5%), 6-7 (37.5%) in male (Table 5). 2) It was suggested that the pubertal growth peak in stature was already passed, if SMI 8 occurred. 3) Ages of SMI in female were about 2 years earlier than those of SMI in male, and the sexual difference was gradually decreased in puberty. 4) Duration of SMI was longest at SMI 6-7 in both sex and the mean was 8.5 months. After this stage, the velocity of skeletal maturity in female was decreased than in male. 5) The correlation coefficient between each SMI and pubertal growth peak was very high (Table 8).

• 화훼연구
• /
• 제19권4호
• /
• pp.206-211
• /
• 2011

절화 국화 '백마'의 수확 후 수송조건 및 생장조절제 처리가 선도유지 및 품질에 미치는 영향을 알아보기 위하여 절화 국화 '백마'를 공시재료로 사용하였다. 수송조건 실험 결과 저장온도에 따른 절화 품질은 $5^{\circ}C$ 저온 저장시 상온(대조구)저장과 $20^{\circ}C$ 저장 보다 효과적임을 확인하였다. 또한 수송방법에 따른 절화 품질은 물올림 처리 후 수직 수송방법이 다른 처리구에 비하여 우수한 효과를 나타내었다. 특히 생장조절제 uniconazole $10mg/L^{-1}$ 문무 처리는 개화를 지연시켜 선도를 유지시켰으며 daminozide 1,000배 분무 처리는 꽃목 굽음을 지연시켜 절화 국화 품질 유지에 우수한 결과를 나타내었다.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.126-136
• /
• 1999

We studied on crack growth retardation in single overloading condition. Crack tip branching which as the second mechanism on crack growth retardation was examined. Crack tip branching was observed to kinked type and forked type. It was found that the branching angle range was from 25 to 53 degree. The variations of crack driving force with branching angle were calculated with finite element method The variation of {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and total crack driving force(K) were examined respectively So {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and K mean to mode I, II and total crack driving force. Present model(Willenborg's model) for crack growth retardation prediction was modified to take into consideration the effects of crack tip branching When we predicted retardation with modified model. it was confirmed that predicted and experimental results coincided with well each other.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.85-95
• /
• 2012

본 논문은 이미 저탄소 녹색성장법이 발효된 상태에서 대구 경북 지역의 대기업과 중소기업 및 일반기업과 녹색기업이 이에 대응하여 그린 경영을 어떻게 추진하고 있는지를 조사했다. 이를 위해 그린경영에 대한 인지도 및 영향도를 조사 분석하여 그린경영에 대한 현 상황을 파악하였다. 그 결과 기업의 규모와 성격에 따라 여러 가지 측면에서 많은 차이를 보이고 있었다. 이것을 바탕으로 향후 그린 경영에 대한 인지도 향상과 이를 통해 새로운 사업기회를 창출하기 위해서는 기업차원에서는 무엇을 해야 하며 정부차원에서는 무엇을 해야 할 것인지에 대해서 방향을 제시하고자 했다.