• Title/Summary/Keyword: Degree of acquisition

Search Result 185, Processing Time 0.02 seconds

Verification of Stereotactic Target Point Achieved by Acquisition of MR Image in Actual Treatment Position of Radiosurgery (정위적 방사선 수술시 치료위치에서의 정위적 표적점 확인을 통한 자기공명영상 획득의 정확도 연구)

  • Kim Sang Hwan;Ryu Ji Ok;Kim Baek Kyu;Kim Yong ho
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.11 no.1
    • /
    • pp.43-48
    • /
    • 1999
  • Purpose : For practical application of the MR image for stereotactic radiosurgery, the target point achieved by acquisition of MR image in a relatively homogeneous phantom has to agree with the actual isocenter of irradiation in real radiosurgery and the amount of distortion of the MR image should be known. Materials and Methods : A dosimetric film with a random target point was inserted into a radish vertically and horizontally on axis Z and they were fixed with a headring. After image acquisition by stereotactic radiosurgery planning system, we achieved stereotactic coordinate of the target point and examined irradiation using the coordinate acquired as isocenter. After the irradiation, the film in the radish was developed and processed and the degree of coincidence between the target point marked on the film and the center of the radiation distribution. In order to measure the degree of distortion of the MR image in a different way, an acryl phantom was made and punctures were made at intervals of 1 cm and a drop of oil was dropped into it. Then, it was inserted into the radish vertically and horizontally on axis Z to acquire the MR image. Each coordinate was achieved and the estimation of distortion of MR image was made both in vertical and horizontal directions Results : The film from the radio was developed and for the one inserted vertically on axis Z, there was a good coincidence in the discrepancy between the target point marked on the film and the center of the radiation distribution. For the one inserted horizontally, the discrepancy between them was under 0.5 mm. As a result of estimating distortion of MR image using acryl, the discrepancy was under 0.45 mm in the case of the phantom inserted vertically on axis Z, and that of the one inserted horizontally was 1.4 mm. Conclusion : We were able to confirm good coincidence in homogeneous phantom in actual treatment position of radiosurgery using the MR image and the discrepancy measured in the analysis of distortion of the MR image did not exceed the permissible level. Therefore, it was evident the system of the hospital is suitable for radiosurgery using MR image.

  • PDF

A study on the needs of dental hygiene students in a region for the credit bank system for a bachelor's degree (일부지역 치위생과 학생들의 학사학위 취득을 위한 학점은행제 요구도 조사)

  • Kim, Mi-Jeong;Lee, Hye-Kyung
    • Journal of Korean society of Dental Hygiene
    • /
    • v.9 no.2
    • /
    • pp.179-191
    • /
    • 2009
  • The purpose of this study was to examine the needs of dental hygiene students at a lifelong education center of a three-year-course college for a credit bank system. The subjects in this study were 200 dental hygiene students at a college located in J, which offered courses of a credit bank system. A survey was conducted from May 19 to 23, 2008, to gather data on the acquisition of a bachelor's degree and the credit bank system, and the answer sheets from 184 respondents(92%) were collected. After the collected data were analyzed with SPSS/WIN 12.0 program, the following findings were given: 1. In regard to an intention of taking a bachelor's degree, the largest number of the students investigated(74.5%) intended to do that if they had any chance. As for the reason, 55.6% wanted to get the degree in pursuit of their own personal development. 2. Concerning how to win a bachelor's degree, the largest group that accounted for 63.0% preferred the credit bank systems of college lifelong education centers. 41.8% got interested in the credit bank system mainly because their acquaintances informed them of it. It shows that colleges should reinforce publicity activities if they want to offer the credit bank system. 3. The quality of educational programs and cost had an impact on the choice of an educational institution when they planned to get a bachelor's degree from the credit bank system. Therefore excellent educational programs should be provided, and the government should provide learners with economic help and fund educational institutions. 4. As to comparison of a regular college and the credit bank system as a way to get a bachelor's degree, that was considered to be helpful for finding a job(a mean of 3.39) and for the development of sociability(3.22). That was also deemed to be of use for the improvement of practical job performance, to win public recognition and to be helpful for being well-cultivated, though not many students had those opinions. They took a different view according to academic year(p<.05). 5. Regarding the expected effects of getting a degree from the credit bank system, the greatest group expected it to step up their personal development(3.85). The second largest group expected it to boost job efficacy(3.30), and the students whose academic year was higher had a better opinion. 6. As for future directions for the credit bank system, the largest group put emphasis on the improvement of social perception through intensive P.R. and the enhancement of the qualifications of professors and lecturers(4.02). These opinions were more stressed by the juniors than by the sophomores and seniors, and academic year made a significant difference to their views(p<.05).

  • PDF

The Effect of Price Discount Rate According to Brand Loyalty on Consumer's Acquisition Value and Transaction Value (브랜드애호도에 따른 가격할인율의 차이가 소비자의 획득가치와 거래가치에 미치는 영향)

  • Kim, Young-Ei;Kim, Jae-Yeong;Shin, Chang-Nag
    • Journal of Global Scholars of Marketing Science
    • /
    • v.17 no.4
    • /
    • pp.247-269
    • /
    • 2007
  • In recent years, one of the major reasons for the fierce competition amongst firms is that they strive to increase their own market shares and customer acquisition rate in the same market with similar and apparently undifferentiated products in terms of quality and perceived benefit. Because of this change in recent marketing environment, the differentiated after-sales service and diversified promotion strategies have become more important to gain competitive advantage. Price promotion is the favorite strategy that most retailers use to achieve short-term sales increase, induce consumer's brand switch, in troduce new product into market, and so forth. However, if marketers apply or copy an identical price promotion strategy without considering the characteristic differences in product and consumer preference, it will cause serious problems because discounted price itself could make people skeptical about product quality, and the changes of perceived value might appear differently depending on other factors such as consumer involvement or brand attitude. Previous studies showed that price promotion would certainly increase sales, and the discounted price compared to regular price would enhance the consumer's perceived values. On the other hand, discounted price itself could make people depreciate or skeptical about product quality, and reduce the consumers' positivity bias because consumers might be unsure whether the current price promotion is the retailer's best price offer. Moreover, we cannot say that discounted price absolutely enhances the consumer's perceived values regardless of product category and purchase situations. That is, the factors that affect consumers' value perceptions and buying behavior are so diverse in reality that the results of studies on the same dependent variable come out differently depending on what variable was used or how experiment conditions were designed. Majority of previous researches on the effect of price-comparison advertising have used consumers' buying behavior as dependent variable. In order to figure out consumers' buying behavior theoretically, analysis of value perceptions which influence buying intentions is needed. In addition, they did not combined the independent variables such as brand loyalty and price discount rate together. For this reason, this paper tried to examine the moderating effect of brand loyalty on relationship between the different levels of discounting rate and buyers' value perception. And we provided with theoretical and managerial implications that marketers need to consider such variables as product attributes, brand loyalty, and consumer involvement at the same time, and then establish a differentiated pricing strategy case by case in order to enhance consumer's perceived values properl. Three research concepts were used in our study and each concept based on past researches was defined. The perceived acquisition value in this study was defined as the perceived net gains associated with the products or services acquired. That is, the perceived acquisition value of the product will be positively influenced by the benefits buyers believe they are getting by acquiring and using the product, and negatively influenced by the money given up to acquire the product. And the perceived transaction value was defined as the perception of psychological satisfaction or pleasure obtained from taking advantage of the financial terms of the price deal. Lastly, the brand loyalty was defined as favorable attitude towards a purchased product. Thus, a consumer loyal to a brand has an emotional attachment to the brand or firm. Repeat purchasers continue to buy the same brand even though they do not have an emotional attachment to it. We assumed that if the degree of brand loyalty is high, the perceived acquisition value and the perceived transaction value will increase when higher discount rate is provided. But we found that there are no significant differences in values between two different discount rates as a result of empirical analysis. It means that price reduction did not affect consumer's brand choice significantly because the perceived sacrifice decreased only a little, and customers are satisfied with product's benefits when brand loyalty is high. From the result, we confirmed that consumers with high degree of brand loyalty to a specific product are less sensitive to price change. Thus, using price promotion strategy to merely expect sale increase is not recommendable. Instead of discounting price, marketers need to strengthen consumers' brand loyalty and maintain the skimming strategy. On the contrary, when the degree of brand loyalty is low, the perceived acquisition value and the perceived transaction value decreased significantly when higher discount rate is provided. Generally brands that are considered inferior might be able to draw attention away from the quality of the product by making consumers focus more on the sacrifice component of price. But considering the fact that consumers with low degree of brand loyalty are known to be unsatisfied with product's benefits and have relatively negative brand attitude, bigger price reduction offered in experiment condition of this paper made consumers depreciate product's quality and benefit more and more, and consumer's psychological perceived sacrifice increased while perceived values decreased accordingly. We infer that, in the case of inferior brand, a drastic price-cut or frequent price promotion may increase consumers' uncertainty about overall components of product. Therefore, it appears that reinforcing the augmented product such as after-sale service, delivery and giving credit which is one of the levels consisting of product would be more effective in reality. This will be better rather than competing with product that holds high brand loyalty by reducing sale price. Although this study tried to examine the moderating effect of brand loyalty on relationship between the different levels of discounting rate and buyers' value perception, there are several limitations. This study was conducted in controlled conditions where the high involvement product and two different levels of discount rate were applied. Given the presence of low involvement product, when both pieces of information are available, it is likely that the results we have reported here may have been different. Thus, this research results explain only the specific situation. Second, the sample selected in this study was university students in their twenties, so we cannot say that the results are firmly effective to all generations. Future research that manipulates the level of discount along with the consumer involvement might lead to a more robust understanding of the effects various discount rate. And, we used a cellular phone as a product stimulus, so it would be very interesting to analyze the result when the product stimulus is an intangible product such as service. It could be also valuable to analyze whether the change of perceived value affects consumers' final buying behavior positively or negatively.

  • PDF

Self-evaluative Awareness of Problem Solving Ability In Psychiatric Nurse Practitioners (정신보건간호사의 문제해결능력에 대한 인식정도)

  • Yang Soo;Lee Gyung Joo;Yu Sook Ja
    • Journal of Korean Public Health Nursing
    • /
    • v.16 no.2
    • /
    • pp.378-387
    • /
    • 2002
  • This study was conducted to investigate the degree of PSI (self-evaluative awareness of problem solving ability) in PMHNP (psychiatric mental health nurse practitioners) and to identified the factors predicting problem solving ability of them, in order to provide basic data for the development of the specific education programs to improve problem solving ability. Data was collected from 355 subjects who have the certificates of PMHNP working in hospitals and public centers. Chun Seok Kyun's instruments (1993) based on the Heppner and Petersen's Problem Solving Inventory (1982) was used to determine PMHNPs' PSI. The results were as follows; 1. The average score of PSI of PMHNP was $2.81\pm0.23$. Of the three factors. there marked the lowest score in the factor 3. personal control $(2.56\pm0.43)$, and the highest score was in the factor 1. problem-solving confidence $(2.95\pm0.34)$. 2. The differences in PSI were significant for degree of education and career in psychiatric settings (p=0.000l, p=0.0187). 3. Job satisfaction was the highest factor predicting PSI of PMHNP$(17.9\%)$. When degree of education, career in psychiatric setting and marital status were added, the total predictors explained $24.3\%$. As a result, it is necessary to conduct further research in relation to the problem-solving process, the development of education program. skill acquisition and measurement of problem solving in nursing practice.

  • PDF

Analysis of nursing doctoral dissertation formats over a decade: A comparative research between traditional and publication format at a university (간호학 박사학위논문 제도의 출판 형식 도입 10년 현황 분석: 일 대학 학위과정의 전통 형식과 출판 형식의 비교)

  • Choi, Subin;Park, Jee-Eun;Woo, Kyungmi
    • The Journal of Korean Academic Society of Nursing Education
    • /
    • v.30 no.2
    • /
    • pp.101-112
    • /
    • 2024
  • Purpose: The study aimed to examine doctoral students' degree acquisition paths and postgraduate research achievements and explore whether there are differences in the research achievements of doctoral degree holders in relation to the dissertation format. Methods: This study is a retrospective cohort study of nursing doctoral graduates whose degree conferral dates were between August 2013 and August 2023 that compared two dissertation tracks: traditional and publication. We evaluated the proportion of graduates in each track, publication of their dissertations, time to graduation, and the number of peer-reviewed journal publications after graduation. Results: Of the sample, 160 (87.4%) graduated in the traditional track, with only 56 (35.0%) of them publishing their dissertations after graduation. Excluding dissertations, 114 of the graduates (71.3%) published first-authored articles in the traditional track, while 12 (52.2%) did so in the publication track. The time to graduation was significantly shorter in the traditional track, with an average of 5.47±2.45 years, compared to 6.61±2.57 years in the publication track (z=2.26, p=.023). In the traditional track, 64 of graduates (40.0%) majored in adult health nursing, whereas in the publication track, 8 (34.8%) studied community health nursing. Conclusion: This study emphasizes the significance of the publication track for nursing doctoral dissertations in terms of research dissemination. Despite its numerous advantages, it is not yet the preferred choice for both students and faculty. Maintaining the publication track as an additional graduation option is worthwhile, as it allows students to gain research publishing experience before graduation and to effectively disseminate scientific findings in nursing.

A study of dental hygiene students on school subject degree of recognition before admission and satisfaction (치위생과 학생들의 입학전 학과 인지도와 만족도 및 취업의식에 관한 조사)

  • Kim, Hwa-Ju;Lim, Kun-Ok;Kim, Yun-Jeong
    • Journal of Korean society of Dental Hygiene
    • /
    • v.6 no.2
    • /
    • pp.115-127
    • /
    • 2006
  • A purpose of this study is degree of recognition and consciousness investigation about a satisfaction duty before admission about a school subject of some academic dental hygiene students. From responses to individual written survey questionnaires answered by 608 students who are studying Dental Hygiene at colleges in Mokpo, Iksan, Gangneung. The following are the results regarding their satisfaction levels with their majors and their interest in working abroad: 1. Regarding the motivating factors to major in Dental Hygiene, most students(51.3%), particularly most freshmen(57.3%), have chosen this major because of more job opportunities than students with other majors. The most common source of information in choosing majors is the Internet(30.8%). 2. Most students do not want to change their majors even if they are provided with the chance to do so(65.5%). They are in general satisfied with their studies. The result shows that the Dental Hygiene majors are positive toward their major. 3. Most students will choose their jobs by their own choices(40.6%), and the most important factor in their choices is the opportunity of self-growth and development(33.1%). The survey results show that the Dental Hygiene students value their own decisions and self-realization. 4. Showed the difference that as a result of having seen a knowledge degree advance a school subject of major in Dental Hygiene by a school year and ash students, an admission motive, relevance of an information acquisition path, all noted. 5. And were able to see the difference that noted in an adviser, work selection bases in case of work selection whether or not there was a dissatisfaction reason about a major and a criminal record.

  • PDF

The Effect of Robot-Based STEAM Class on the Korean Learning of Multiculturul School Children -Focusing on After School Learning of Elementary School- (로봇 활용 STEAM 수업이 다문화 아동의 한국어 학습에 미치는 영향 -초등학교 방과 후 수업을 중심으로-)

  • Kim, Se-Min;You, Kang-Soo
    • Journal of Digital Convergence
    • /
    • v.13 no.8
    • /
    • pp.1-8
    • /
    • 2015
  • This paper focuses on analyzing Korean language learning effect through the STEAM class using a robot which is targeted on multicultural elementary school students. For the purpose of it, the degree of difficulty and interest of how students feel has been measured. By using the programing tool of Korean language entering base, they learn the programming commands like as variable, data type, branching statement, loop statement, etc in Korean, the effect of Korean learning has been measured. It has been examined two interviews at the beginning and the end of the second semester to measure the effect of Korean language learning. As a result of this research, It can be realized that multicultural children who have similar linguistic characteristics and cultural sphere understood Korean language easily when they take the Korean language class by utilizing a robot, and the class had an effect on the acquisition of Korean language for multicultural children.

A Study on the Reliability of Observational Settlement Analysis Using Data Mining (데이터마이닝을 이용한 관측적 침하해석의 신뢰성 연구)

  • 우철웅;장병욱
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.45 no.6
    • /
    • pp.183-193
    • /
    • 2003
  • Most construction works on the soft ground adopt instrumentation to manage settlement and stability of the embankment. The rapid progress of the information technologies and the digital data acquisition on the soft ground instrumentation has led to the fast-growing amount of data. Although valuable information about the behaviour of the soft ground may be hiding behind the data, most of the data are used restrictedly only for the management of settlement and stability. One of the critical issues on soft ground instrumentation is the long-term settlement prediction. Some observational settlement analysis methods are used for this purpose. But the reliability of the analysis results is remained in vague. The knowledge could be discovered from a large volume of experiences on the observational settlement analysis. In this article, we present a database to store settlement records and data mining procedure. A large volume of knowledge about observational settlement prediction were collected from the database by applying the filtering algorithm and knowledge discovery algorithm. Statistical analysis revealed that the reliability of observational settlement analysis depends on stay duration and estimated degree of consolidation.

A Study on Cavity Pressure and Tensile Strength of Injection Molding (사출성형에서 캐비티압력과 인장강도에 관한 연구)

  • Yoo, J.H.;Kim, H.S.
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.2 no.6
    • /
    • pp.110-116
    • /
    • 1994
  • In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

  • PDF

Determination of Sampling Unit Size for Cultivation Area Survey using Remote Sensing Technology

  • Park, Jin-Woo;Shin, Gi-Eun;Lee, Suk-Hoon;Byun, Jong-Seok
    • The Korean Journal of Applied Statistics
    • /
    • v.25 no.5
    • /
    • pp.733-741
    • /
    • 2012
  • The successful launch of Arirang satellites allow the acquisition of high resolution satellite imagery of Korean territory and enables the transition from the conventional cultivation area survey method to new image based methods adopted in advanced nations. In this study, we suggested reasonable sizes of the primary sampling unit and the secondary sampling unit for the satellite imagery based sampling design in 8 provinces preselected for this research. The PSU size was determined mainly in consideration of intracorrelation that shows the degree of homogeneity within each cluster and the efficiency of the image process. For the SSU size, we considered the relative standard error and the differences between the land cover maps produced by the Ministry of Environment and the satellite imagery processed by the National Statistical Office.