• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.731-740
• /
• 1995

The objective of this paper is to develop defect assessment technology for integrity evaluation of CANDU pressure tubes. In fracture mechanics analysis, three-dimensional and two-dimensional (line-spring model) finite element analyses were performed to obtain the stress intensity factor for axial and circumferential surface cracks. In leak before break (LBB) analysis, heat transfer analyses for through-wall cracks were performed by considering the cooling effect and the LBB application time was computed. It was shown that the analytical results obtained in this study provide less-conservative but accurate solution for defect assessment of CANDU pressure tubes.

• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.111-115
• /
• 2005

The Study provides the technical background and calculation method f3r the long wave track defect. On high speed railway, It is necessary to manage the long wave band up to 80m track defect fur improving a riding quality. For this reason, Track recording methods for highspeed railway are used 10m and 30m recording bases, these are covered middle wave band and long wave band successfully. Extended base recording data is calculated by geometrical model and this data provides a good result for KTX riding index.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.126-132
• /
• 1995

The electrical stress of short channel polycrystalline silicon (poly-Si) thin film transistor (TFT) has been investigated. The device characteristics of short channel poly-Si TFT with 5$\mu$m channel length has been observed to be significantly degraded such as a large shift in threshold voltage and asymmetric phenomena after the electrical stress. The dominant degradation mechanism in long channel poly-Si TFT's with 10$\mu$m and 20$\mu$m channel length respectively is charage trappling in gate oxide while that in short channel device with 5.mu.m channel length is defect creation in active poly-Si layer. We propose that the increased defect density within depletion region near drain junction due to high electric field which could be evidenced by kink effect, constitutes the important reason for this significant degradation in short channel poly-Si TFT. The proposed model is verified by comparing the amounts of the defect creation and the charge trapping from the strechout voltage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.124-125
• /
• 2023

Defect detection during liquid crystal display (LCD) manufacturing has always been a critical challenge. This study aims to address this issue by proposing a data augmentation method based on generative adversarial networks (GAN) to improve defect identification accuracy in LCD production. By leveraging synthetically generated image data from GAN, we effectively augment the original dataset to make it more representative and diverse. This data augmentation strategy enhances the model's generalization capability and robustness on real-world data. Compared to traditional data augmentation techniques, the synthetic data from GAN are more realistic, diverse and broadly distributed. Experimental results demonstrate that training models with GAN-generated data combined with the original dataset significantly improves the detection accuracy of critical defects in LCD manufacturing, compared to using the original dataset alone. This study provides an effective data augmentation approach for intelligent quality control in LCD production.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.423-439
• /
• 1991

본 연구의 목적은 당제철소에서 생산하는 제품중 전기강판 방향성 제품의 제질(철손) 불량원인을 추적하여 조업 guidance를 제시하는 model개발이다. model개발은 현장조업 data에 대해 상관분석, 회귀분석, 분산분석등의 통계적분석을 통하여 재질에 영향을 미치는 주 관련인자들의 조업기준 재정립과 menu화면에 의한 자동 불량원인 추적 model을 개발하였으며, model개발을 위한 사용 tool은 SAS package를 활용하였다.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• Journal of Korean Dental Science
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2012

Purpose: In this study the bone healing ability of autogenous tooth bone graft material as a substitute material was evaluated in a mini-pig cranial defect model through histologic examinations and osteonectin reverse transcription polymerase chain reaction (RT-PCR) quantitative analysis. Materials and Methods: A defect was generated in the cranium of mini-pigs and those without a defect were used as controls. In the experimental group, teeth extracted from the mini-pig were manufactured into autogenous tooth bone graft material and grafted to the defect. The mini-pigs were sacrificed at 4, 8, and 12 weeks to histologically evaluate bone healing ability and observe the osteonectin gene expression pattern with RT-PCR. Result: At 4 weeks, the inside of the bur hole showed fibrosis and there was no sign of bone formation in the control group. On the other hand, bone formation surrounding the tooth powder granule was observed at 4 weeks in the experimental group where the bur hole was filled with tooth powder. Osteonectin gene expression; there was nearly no osteonectin expression in the control group while active osteonectin expression was observed from 4 to 12 weeks in the experimental group. Conclusion: We believe this material will show better results when applied in a clinical setting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.203-203
• /
• 2011

The importance of stepped single-crystal surfaces as model catalysts has been well recognized [1]. We re-investigated the adsorption properties of $H_2$ and CO, most important species in platinum-based catalysts, on nearly defect-free and highly stepped surfaces of one and the same Pt(111) crystal. While both being symmetric and single-peaked from the nearly defect-free surface, temperature-programmed desorption (TPD) spectra from the highly stepped surface saturated at 90 K with H and CO were triply- and doubly-peaked, respectively. Once pre-adsorbed, CO preempted step and then terrace sites, inhibiting the dissociative $H_2$ adsorption completely. Pre-adsorbed H inhibited the CO adsorption on terrace sites only, leaving defect sites intact for CO adsorption even at the saturation H precoverage. On defect-free Pt(111), while pre-adsorbed CO inhibited the dissociative $H_2$ adsorption completely, pre-adsorbed H could not inhibit the CO adsorption completely. These intriguing, but interesting results are discussed in terms of energetics/kinetics and the role of surface step sites in the dissociative adsorption of $H_2$ on Pt(111) [2].

• Geomechanics and Engineering
• /
• v.22 no.5
• /
• pp.461-473
• /
• 2020

Natural rock mass contains defects of different shapes, usually filled with inclusions such as clay or gravel. The presence of inclusions affects the failure characteristics and mechanical properties of rock mass. In this study, the strength and failure characteristics of rock with inclusions were studied using the particle flow code under uniaxial compression. The results show that the presence of inclusions not only improves the mechanical properties of rock with defects but also increases the bearing capacity of rock. Circular inclusion has the most obvious effect on improving model strength. The inclusions affect the stress distribution, development of initial crack, change in crack propagation characteristics, and failure mode of rock. In defect models, concentration area of the maximum tensile stress is generated at the top and bottom of defect, and the maximum compressive stress is distributed on the left and right sides of defect. In filled models, the tensile stress and compressive stress are uniformly distributed. Failing mode of defect models is mainly tensile failure, while that of filled models is mainly shear failure.