• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.875-883
• /
• 2009

We investigated the effects of manufacturing method on the quality of beef jerky using electron micrography. Six types of beef jerky were prepared by the addition of sugar (A), licorice (B), one of three kinds of spice extract (clove: C, fennel fruit: D, and Chungyang green pepper extract: E), or a mixture of all spice extracts (F). Microstructural changes in beef jerky during preparation by drying, with respect to drying method and the nature of the added spice extract, were observed by scanning electron micrography (SEM) and transmission electron micrography (TEM). The latter technique showed that the microstructure of fresh meat showed actin and myosin in myofibril lines, and also mitochondria and inner membranes. Beef muscle structure was broken at many myofibril lines and decomposition of inner membrane material was evident after seasoning. SEM of air-blast dried beef jerky with added medicinal herb extracts showed both large spaces and regular myofibrils, whereas hot air-dried beef jerky had no spaces and the muscle myofibrils were still evident. After review of all available micrographs from SEM and TEM, we concluded that use of medicinal herb extracts could be helpful in preserving the muscle myofibril structure during drying, and the air-blast drying method is recommended to optimize the textural quality characteristics of beef jerky.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.314-320
• /
• 2017

A pressure relief valve is generally used to prevent piping systems from being broken due to high pressure gas flows. However, the sudden pressure drop caused by the pressure relief valve produces high acoustic energy which propagates in the form of compressible acoustic waves in the pipe and sometimes causes severe vibration of the pipe structure, thereby resulting in its failure. In this study, internal aerodynamic noise due to valve flow is estimated for a simple contraction-expansion pipe by combining the LES (Large-Eddy Simulation) technique with the wavenumber-frequency analysis, which allows the decomposition of fluctuating pressure into incompressible hydrodynamic pressure and compressible acoustic pressure. In order to increase the convergence, the steady Reynolds-Averaged Navier-Stokes equations are numerically solved. And then, for the unsteady flow analysis with high accuracy, the unsteady LES is performed with the steady result as the initial value. The wavenumber-frequency analysis is finally performed using the unsteady flow simulation results. The wavenumber-frequency analysis is shown to separate the compressible pressure fluctuation in the flow field from the incompressible one. This result can provide the accurate information for the source causing so-called acoustic-induced-vibration of a piping system.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.159-183
• /
• 2012

Promoted in places like Korea, the central government and the local governments that can provide information on which to base investment policy to attract foreign direct mutation-specific gravity model (Shift-Share Model) In this study, the decrease of foreign direct investment performance using factors looked up in the industry. The sample period of 2009, 2010, 2011 nationwide (metropolitan and non-metropolitan separated) of foreign direct investment performance for Industry Standard Industrial Classification (Division) was conducted. Factors to look at the results of the National Growth Effect(NS), the industrial structure effect (IM), local allocation effect(RS) to decrease foreign direct investment in 2010 and 2011 non-metropolitan, metropolitan national growth effect(RS) is negative(-) has a value. Because it appears to be the aftermath of the global recession, the impact on the domestic economy Metropolitan area and the Industrial Mix Effect(IM) to the development of education, culture, business, and transportation, etc. in the development of service industries than in non-metropolitan valid environment. In the sector of services (food accommodation, business services, entertainment), We did it, was able to find the function. However, the Regional Share Effect(RS) be competitive in the manufacturing sector in metropolitan areas in the metal and chemical sectors have been identified. These results seems to enhance the competitiveness of the region, such as the metropolitan area's excellent workforce. Shift-Share analysis technique based on competitive factors of the region, to find the failure has limitations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.17-27
• /
• 2014

Numerical model became one of most important tools for identifying the state of an existing structure in accordance with development of numerical analysis techniques. A numerical model should be updated based on the measured responses from the existing structure to accurately use the model for identifying the state of the bridge and executing numerical experiments. In this study, a new model updating method based on repetition method without a differential function is introduced and applicability for high speed railway bridge is verified with dynamic stability analysis. A fine measurement based on measurement points roaming method was executed with an wireless measurement system for precise dynamic characteristic analysis. The natural frequencies and mode shapes were estimated by correlation analysis and a mode decomposition technique. An initial numerical model was constructed based on design drawings and the model have been updated in accordance with the introduced model updating method. The results from numerical experiment and field test have been compared for verifying the applicability of the model updating method. And the dynamic stability analysis has been executed to verify the usability of the updated numerical model and the model updating method. It seems that the model updating method can be used for various bridges after evaluation of applicability for other type bridges in further studies.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The crucibles of Baekje Kingdom from the Ssangbukri Site which were used for glass and metal melting had light brown, grayish blue and grayish brown colored bodies. In thin section, the crucibles contained numerous quartz grains and pottery fragments. The surface was covered with fine grained quartz for thermal resistance. Based on decomposition of mica group minerals and formation of mullite detected by X-ray diffraction analysis, it was inferred that all crucibles have been fired over $1,000^{\circ}C$. It was also found that firing temperature has exceeded $1,100^{\circ}C$ in some crucibles because feldspar was not detected. The maximum temperature was assumed at $1,200^{\circ}C$. The magnetic susceptibility values and geochemical characteristics sorted out the crucibles into two groups that differed from the characteristics of the local soils. This reflected geological setting of the site where the alluvium was formed from two kinds of surrounding rock masses, granite gneiss and biotite granite. However, the local soils had similarities with the crucibles in weathering degree and geochemical behavior of major elements. In consequence, it was considered that the raw clay of the crucibles was supplied from the local area of the site.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.83-89
• /
• 2003

2,4-Dichlorophenoxyacetic acid (2,4-D) as a widely used herbicide has caused serious environmental problems because of its difficult decomposition in nature. We isolated the strain capable of metabolizing 2,4-D as sole carbon and energy source by an enrichment culture technique from the 2,4-D contaminated soil collected at orchard in Gwangju, Korea. This strain was identified tentatively as Aeromonas sp. NOH2. With this strain, we established the response surface methodology (Box-Behnken Design) to optimize the principle parameters for maximizing biodegradation of 2,4-D such as culture pH, temperature, and nutrient concentration in liquid batch culture. The ranges of parameters were obtained from preliminary works done at our laboratory and chosen as 5.5, 6.5, and 7.5 for pH, 25, 30, and $35^{\circ}C$ for temperature, and 5, 20, and 35 g/1 nutrient concentration. Initial concentration of 2,4-D was 500 ppm and nutrient source was tryptic soy broth. The experimental data were significantly fitted to a second order polynomial equation using multiple regression. The most important parameter influencing 2,4-D degradation and biomass production was nutrient concentration. For 2,4-D degradation, the optimum values of pH and temperature, and nutrient concentration were obtained at pH (6.5), temperature (31.8 to $32.1^{\circ}C$), and nutrient concentration (29.6 to 30.1.0 g/1).

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.1023-1043
• /
• 2010

As main memory get cheaper, it becomes increasingly affordable to load entire index of DBMS and to access the index. Since speed gap between CPU and main memory is growing bigger, many researches to reduce a cost of main memory access are under the progress. As one of those, cache conscious trees can reduce the cost of main memory access. Since cache conscious trees reduce the number of cache miss by compressing data in node, cache conscious trees can reduce the cost of main memory. Existing cache conscious trees use only fixed one compression technique without consideration of properties of data in node. First, this paper proposes the DC-tree that uses various compression techniques and change data layout in a node according to properties of data in order to reduce cache miss. Second, this paper proposes the level of compression locality that describes properties of data in node by formula. Third, this paper proposes Forced Partial Decomposition (FPD) that reduces the nutter of cache miss. DC-trees outperform 1.7X than B+-tree, 1.5X than simple prefix B+-tree, and 1.3X than pkB-tree, in terms of the number of cache misses. Since proposed DC-trees can be adopted in commercial main memory database system, we believe that DC-trees are practical result.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.109-119
• /
• 2002

This study is to estimate that food waste bags with biodegradable plastic are really decomposed by microorganism in composting with food waste and to examinate how biodegradable plastic affects composting. 6 kinds of 30%, 4 kinds of 100% and 2 kinds of none biodegradable plastics were used in d1is study. In 30% biodegradable plastics the highest Degradation rare is 6% in meso-condition and 10% in thermal-condition. Srain at auto break decreased to 150% in meso-condition and 120% in thermal-condition. Stress at max load were also reduced to $180kgf/cm^2$ in mesocondition and $200kgf/cm^2$ in thermal-condition. Usually, LLDPE decreased larger than HDPE in physical characreristics but HDPE is higher in degradation rate. 1n stain at auto break and stress ar max load 100% biodegradable plastic declined to 230% and to $380kgf/cm^2$ in meso-condition and to 440% and to $400/cm^2$ in thermal-condition respectively. 100% biodegradable plastics showed higher biodegradation and decomposition then 30%. They appeared clearly through SEM observation. As a result, it was not appropriate to use 30% biodegradable plastics as food waste bag because they were not decomposed perfectly. It is possible to use 100% biodegradable plastic as it but cost is too high. So development of technique is needed.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.151-162
• /
• 1998

The compressibility and the permeability of organic soil are so high that they cause many engineering problems when constructing a structure on the soil. If the organic content of the soil could be reduced by any applicable engineering technique, the engineering properties of the soils can be improved to some extent. The purpose of this study would thus be focused on how to decrease the amount of organic matters by applying aerobic biodegradation for eliminating post-construction settlement problems. To enhance the aerobic decomposition, oxygen was supplied to the soil samples prepared by the mixture of kaolinite and sawdust as organic matter. The dissolved oxygen and the organic content of the soil samples were measured, in accordance with the passage of time through the bests. As oxygen suppliers, HaOa liquid and pure oxygen gas were compared to meet the requirement of the test purposes. Newly manufactured oedometer with the diameter of 130 mm and the height of 300 mm was used for 100 days to perform the compressibility tests for the soils. Based on the results of this experiment, the oxygen gas-treated samples with nutrient settled 30% more than the samples untreated. This confirmed the efficiency of the aerobic biodegradation. $NaNO_3$ added into the soils as nutrients was proved more effective than $K_2HP0_4$. To confirm the activity of micro-organisms, sodium azide was also added to the soils.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.319-322
• /
• 2003

To match the charge induced by the insulators $CeO_2$ with the remanent polarization of ferro electric SBT thin films, areas of Pt/SBT/Pt (MFM) and those of $Pt/CeO_2/Si$ (MIS) capacitors were ind ependently designed. The area $S_M$ of MIS capacitors to the area $S_F$ of MFM capacitors were varied from 1 to 10, 15, and 20. Top electrode Pt and SBT layers were etched with for various area ratios of $S_M\;/\;S_F$. Bottom electrode Pt and $CeO_2$ layers were respectively deposited by do and rf sputtering in-situ process. SBT thin film were prepared by the metal orgnic decomposition (MOD) technique. $Pt(100nm)/SBT(350nm)/Pt(300nm)/CeO_2(40nm)/p-Si$ (MFMIS) gate structures have been fabricated with the various $S_M\;/\;S_F$ ratios using inductively coupled plasma reactive ion etching (ICP-RIE). The leakage current density of MFMIS gate structures were improved to $6.32{\times}10^{-7}\;A/cm^2$ at the applied gate voltage of 10 V. It is shown that in the memory window increase with the area ratio $S_M\;/\;S_F$ of the MFMIS structures and a larger memory window of 3 V can be obtained for a voltage sweep of ${\pm}9\;V$ for MFMIS structures with an area ratio $S_M\;/\;S_F\;=\;6$ than that of 0.9 V of MFS at the same applied voltage. The maximum memory windows of MFMIS structures were 2.28 V, 3.35 V, and 3.7 V with the are a ratios 1, 2, and 6 at the applied gate voltage of 11 V, respectively. It is concluded that ferroelectric gate capacitors of MFMIS are good candidates for nondestructive readout-nonvolatile memories.