• Journal of Engineering Education Research
• /
• 제8권1호
• /
• pp.20-30
• /
• 2005

Recently, a new education paradigm 'Self-directed Learning' has attracted considerable attention. Problem-Based Learning (PBL) has been recognized as methodology to help students expand scientific thinking and knowledge. improve applicability, develope critical knowledge, and creatively solve problems. There have been significant efforts to develope PBL-based courses in mechanical engineering. A new PBL-based, multi-disciplinary course 'Product Dissection and Design Reasoning' has been developed in this paper. The course examines the way in which products and machines work and is intended to show freshman or sophomore level students how fundamental physical principles relate to engineering practice through hands-on dissection experience : thus, the course emphasizes the importance of knowledge of the fundamental physics for design reasoning. The primary role of this course is to develop creative design manpower. This paper describes the philosophy and content of this course and presents results from one year of development.

• Journal of Korean Society on Water Environment
• /
• 제24권1호
• /
• pp.63-68
• /
• 2008

This study was performed to assess the potential use of ozone or UV radiation for the treatment of water contaminated with sulfamethoxazole (SMX), which is frequently used antibiotic in human and veterinary medicines, especially focusing on the kinetic study and effect of pH. In a study using ozone alone, kinetic study was performed to determine second-order rate constant ($k_{O3,SMX}$) for the reactions of SMX with ozone, which was found to be $1.9{\times}10^6M^{-1}s^{-1}$ at pH 7. The removal efficiencies of SMX by ozone were decreased with increase of pH due to rapid decomposition of ozone under the condition of various pH (2.5, 5.3, 7, 8, 10). In a UV irradiation study at 254 nm, a kinetic model for direct photolysis of SMX was developed with determination of quantum yield ($0.08mol\;Einstein^{-1}$) and molar extinction coefficient ($15,872M^{-1}cm^{-1}$) values under the condition of quantum shielding due to the presence of reaction by-products formed during photolysis. For effect of pH on photolysis of SMX, SMX in the anionic state ($S^-$, pH > 5.6), most prevalent form at environmentally relevant pH values, degraded more slowly than in the neutral state (SH, 1.85 < pH < 5.6) by UV radiation at 254 nm.

• Journal of the Korean Chemical Society
• /
• 제57권6호
• /
• pp.703-711
• /
• 2013

In the present investigation, kinetic studies of oxidation of formic acid with and without catalyst and promoter in aqueous acid media were studied under the pseudo-first order conditions [formic acid]T ${\gg}[Cr(VI)]_T$ at room temperature. In the 1,10-phenanthroline (phen) promoted path, the cationic Cr(VI) phen complex is the main active oxidant species undergoes a nucleophilic attack by the substrate to form a ternary complex which subsequently experiences a redox decomposition through several steps leading to the products $CO_2$ and $H_2$ along with the Cr(III) phen complex. The anionic surfactant (i.e., sodium dodecyl sulfate, SDS) and neutral surfactant (i.e., Triton X-100, TX-100) act as catalyst and the reaction undergo simultaneously in both aqueous and micellar phase with an enhanced rate of oxidation in the micellar phase. Whereas the cationic surfactant (i.e., N-cetyl pyridinium chloride, CPC) acts as an inhibitor restricts the reaction to aqueous phase. The observed net enhancement of rate effects has been explained by considering the hydrophobic and electrostatic interaction between the surfactants and reactants. The neutral surfactant TX-100 has been observed as the suitable micellar catalyst for the phen promoted chromic acid oxidation of formic acid.

• Clean Technology
• /
• 제22권4호
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• Journal of Korean Society of Environmental Engineers
• /
• 제22권6호
• /
• pp.1063-1072
• /
• 2000

Kinetic tests on pyrolysis of the mixture of waste automobile lubricating oil and polystyrene were carried out with thermogravimetric technique at the heating rates of 0.5, 1.0, $2.0^{\circ}C/min$ in a stirred batch reactor. The activation energy and the reaction order were determined at conversions of 1 to 100% using differential method. The mixture of waste automobile lubricating oil and polystyrene was pyrolyzed at lower temperature rather than waste automobile lubricating oil and polystyrene. respectively. Also, the thermal decomposition took place in two broad reaction steps. The pyrolyzed oil of mixture represented high selectivity of styrene monomer and dimer like that of polystyrene pyrolyzed products.

• Applied Chemistry for Engineering
• /
• 제9권5호
• /
• pp.624-628
• /
• 1998

The aromatic organic solvents(BTX) were decomposed in the fixed bed reactor packed with a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst, then, supercritical carbon dioxide(SC-$CO_2$) was used as the reaction media. And the conversion was dependent on the inlet concentration of BTX and the molar density of SC-$CO_2$. The conversion of BTX was decreased with increasing of inlet concentration, and was increased with temperature and pressure. The maximum conversion of benzene was 98.5% at $300^{\circ}C$ and 204.1 atm, and that of toluene and xylene were 82.0 and 76.5%, respectively, at $350^{\circ}C$ and 204.1 atm. The intermediate products of partial oxidation were identified as benzaldehyde, phenol, benzenemethanol, and so on. The BTX can be effectively converted into harmless $CO_2$ and $H_2O$ at appropriate operating condition. Thus, the nontoxic recovery process was suggested as the removal method of BTX.

• Journal of the Korean Applied Science and Technology
• /
• 제18권2호
• /
• pp.103-110
• /
• 2001

Resource recovery and recycling of materials and products, including polyurethanes is viewed as a necessity in today's society. Most urethane polymers are made from a polyol and a diisocyanate. these and be chemicals such as water, diamines or diols that react with isocyanate groups and add to the polymer backbone. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal whether by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and feedstock. In the chemical recycling method, there are hydrolysis, glycolysis, pyrolysis and aminolysis. This study, the work was carried out glycolysis using sonication ant catalyzed reaction. Different kinds of recycled polyols were produced by current method(glycolysis), catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols, the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication for the various glycols, increased as fallows: PPG

• Resources Recycling
• /
• 제4권1호
• /
• pp.52-59
• /
• 1995

Treating bulk superalloy scrap with molten zinc has been studled to facililate recycling and recovery- of cobalt.Superalloys investigated were the cobalt-base Mar-M-509 and X45 and the nickel-base Rene 80. Charges withZnlscrap ratlos of 1.5-6.5 were heated to 750-9002 far 1-7.5 hours in a nitrogen atmosphere. The moltenzinc dissolved superalloy scrap and zinc was removed by vacuum distillation at 850-Wk for 4-6 hours. Ithas been concluded that the optimum conditions of decomposition for Mar-M-509 and Rene 80 \"ere dissolutiontemperature of about 850k, Znlscrap ratlo of about 5, and dissalution time of about 5.5 hours. The zinc-treatedsuperalloy prouducts were friable and reacted rapidly with acid solutions. Leaching 9mm pieces of unalloyedMar-M-509 or Rene 80 with 5 times the stolchlometric amount oi 6N HCI at 90t ior 3 hours dissolved about1.5-7.270, while leachmg of the minus 20-mesh products dissolved about 89.0-93.0%.ved about 89.0-93.0%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제36권9호
• /
• pp.1182-1187
• /
• 2007

Changes in composition of fatty acids and free amino acids in three differently dried Alaska pollack (sun dried, naturally cyclic freeze-thaw dried, and 1-year-aged cyclic freeze-thaw dried Alaska pollack (Hwangtae)) were investigated to correlate them with browning reactions in drying and aging Alaska pollack. Major fatty acids of the sun dried Alaska pollack were palmitic acid, oleic acid, and eicosapentaenoic acid (EPA), and those in the Hwangtae were palmitic acid, oleic acid, and gondoic acid. Hwangtae showed the lowest amount of polyunsaturated fatty acids among the three types of dried Alaska pollack. Free amino acids content of sun dried Alaska pollack was higher than that of the cyclic freeze-thaw dried Alaska pollack and Hwangtae. Lesser amount of histidine in Hwangtae (0.02%) than that in the cyclic freeze-thaw dried Alaska pollack (0.087%) may indicate the degradation of histidine due to the browning reaction in aging the cyclic freeze-thaw dried Alaska pollack. Significant changes in compositions of fatty acids and free amino acids among the dried products revealed the browning reaction resulted from carbonyl compounds produced by decomposition of lipid hydroperoxides and free amino acids. Aging the cyclic freeze-thaw dried Alaska pollack for a year contributed to the development of browning.

• Journal of the Korea Convergence Society
• /
• 제10권2호
• /
• pp.285-292
• /
• 2019

Panax ginseng is known for various pharmacological activities mainly due to saponins. Since minor saponins, generated by the decomposition of major saponins, generally exert higher activities than major saponins, the fermentation may increase the minor saponin contents in ginseng products. In this study, we tested fermented ginseng extract whether or not provide a safe cosmetic ingredient for whitening purpose. In this regard, fermented Ginseng extract was prepared and evaluated the inhibitory activity toward tyrosinase and the melanin synthesis suppression. The safety was tested via cell viability and toxicity test. The skin lightening effect was also evaluated by clinical study. The fermented Ginseng extract exerted higher activities in tyrosine inhibition and in suppressing melanin synthesis compared to Kojic acid and arbutin. In the clinical test, skin lightening effecte of the sample was clearly higher than vehicle or Vitamin C. We thus concluded that the fermented Ginseng extract may provide a safe cosmetic ingredient for skin lightening purpose.