• Journal of the Korean Solar Energy Society
• /
• v.39 no.3
• /
• pp.91-102
• /
• 2019

Decomposition models are essential in TMY development and solar energy system design. Up until recently, only a few decomposition model related researches are implemented in Korea due to lack of measured direct normal solar irradiance. In contrast, numerous researches have been conducted in various countries, and some quasi-universal composition models have been recommended by several papers. In this research, three decomposition models - Watanabe model, Reindl-2 model and Engerer1 model - are selected and their site-fitted coefficients are developed using measured direct normal solar irradiance in Seoul. R-squared, RMSE, MBE of the site-fitted models are compared with the case of original coefficients and then each other. The comparison result shows that the Reindl-2 model with site-fitted coefficients is best suitable for Seoul. Further researches will be conducted to find the best model using more various measured data of Korean cities and site-fitting methods.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.3-10
• /
• 2007

A new approach based on implicit surface interpolation combined with domain decomposition is proposed for filling complex-shaped holes in a large polygon model, A surface was constructed by creating a smooth implicit surface from an incomplete polygon model through which the actual surface would pass. The implicit surface was defined by a radial basis function, which is a continuous scalar-value function over the domain $R^{3}$. The generated surface consisted of the set of all points at which this scalar function is zero. It was created by placing zero-valued constraints at the vertices of the polygon model. The well-known domain decomposition method was used to treat the large polygon model. The global domain of interest was divided into smaller domains in which the problem could be solved locally. The LU decomposition method was used to solve the set of small local problems; the local solutions were then combined using weighting coefficients to obtain a global solution. The validity of this new approach was demonstrated by using it to fill various holes in large and complex polygon models with arbitrary topologies.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.3
• /
• pp.1-20
• /
• 2018

It is a very important and fundamental process to know accurately the intensity of the solar energy coming into the installed module considering the tilted angle. Europe and the US commonly use a program called PVsyst to convert the global horizontal irradiation to global irradiation on tilted plane. There are two types of models that PVsyst uses to convert to irradiation on tilted plane. In this paper, Perez model, which is a decomposition model and Perez model, which is a transposition model used in PVsyst, are applied based on global horizontal irradiation and global irradiation on tilted plane measured in a specific area. The comparison of the decomposition model shows the effect of the transpostion model on global irradiation on tilted plane conversion by comparing the ratio of the horizontal diffuse irradiation amount of the Watanabe model which are highly trusted in Asia and the Perez model. The comparison of transposition model confirm the error between the measured data and the calculated value which is applied Perez model to global horizontal irradiation decomposed by Perez model and Watanabe model. Based on the two comparisons, This paper propose a method to confirm the reliability of transposition model and reduce the error when PVsyst is used in Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.174-184
• /
• 2006

In order to fill the holes with complex shapes in the large polygon model, a new approach which is based on the implicit surface interpolation method combined with domain decomposition method is presented. In the present study, a surface is constructed by creating smooth implicit surface from the incomplete polygon model through which the surface should pass. In the method an implicit surface is defined by a radial basis function, a continuous scalar-valued function over the domain $R^3$ The generated surface is the set of all points at which this scalar function takes on the value zero and is created by placing zero-valued constraints at the vertices of the polygon model. In this paper the well-known domain decomposition method is used in order to treat the large polygon model. The global domain of interest is divided into smaller domains where the problem can be solved locally. LU decomposition method is used to solve a set of small local problems and their local solutions are combined together using the weighting coefficients to obtain a global solution. In order to show the validity of the present study, various hole fillings are carried out fur the large and complex polygon model of arbitrary topology.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.3
• /
• pp.81-89
• /
• 2019

Long-term solar irradiance data are required for reliable performance evaluation and feasibility analysis of solar photovoltaic systems. However, measurement data of the global horizontal irradiance (GHI) are only available for major cities in Korea. Neither the direct normal irradiance (DNI) nor the diffuse horizontal irradiance (DHI) are available, which are also needed to calculate the irradiance on the tilted surface of PV array. It is a simple approach to take advantage of the decomposition model that extracts DNI and DHI from GHI. In this study, we investigate variations of solar PV power estimation due to the choice of decomposition model. The GHI data from Korea Meteorological Administration (KMA) were used and different sets of typical meteorological year (TMY) data using some well-known decomposition models were generated. Then, power outputs with the different TMY data were calculated, and a variation of 3.7% was estimated due to the choice of decomposition model.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.979-994
• /
• 2015

The mode shapes of a segmented hull model towed in a model basin were predicted using both the Proper Orthogonal Decomposition (POD) and cross random decrement technique. The proper orthogonal decomposition, which is also known as Karhunen-Loeve decomposition, is an emerging technology as a useful signal processing technique in structural dynamics. The technique is based on the fact that the eigenvectors of a spatial coherence matrix become the mode shapes of the system under free and randomly excited forced vibration conditions. Taking advantage of the simplicity of POD, efforts have been made to reveal the mode shapes of vibrating flexible hull under random wave excitation. First, the segmented hull model of a 400 K ore carrier with 3 flexible connections was towed in a model basin under different sea states and the time histories of the vertical bending moment at three different locations were measured. The measured response time histories were processed using the proper orthogonal decomposition, eventually to obtain both the first and second vertical vibration modes of the flexible hull. A comparison of the obtained mode shapes with those obtained using the cross random decrement technique showed excellent correspondence between the two results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1305-1313
• /
• 2013

In this study, a method to apply feature-based simplification to boundary representation models is proposed. For feature-based simplification, a volume decomposition tree is created from a boundary representation model. The volume decomposition tree is represented by regularized Boolean operations of additive volumes, subtractive volumes, and fillet/round/chamfer volumes, and it is generated by stepwise volume decomposition, which consists of fillet/round/chamfer decomposition, wrap-around decomposition, volume split decomposition, and cell-based decomposition. After the volume decomposition tree is transformed to an infix expression, the CAD model can be simplified by reordering the volumes. To verify the proposed method, a prototype system was implemented, and experiments on test cases were conducted. From the results of the experiments, it is verified that the proposed method is useful for simplifying CAD models based on boundary representation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.3 no.3
• /
• pp.55-58
• /
• 1980

Today, L.P. model has often been used in solving economic and managemental phenomena. But in case of adopting L.P. model in dealing with practical economic and managemental problems there is a possibility that we have difficulties in solving these problems because of greatness of model size, cost for collecting data, cost for adjusting matrix, and etc. In this respect "Decomposition Algorithm for L.P." has been used in overcoming the difficulties above stated. In this paper therefore, I will try to introduce and them criticize Dantzig -Wolfe's "Decomposition Method" and Kornai - Liptak's "Two - Level Planning".ot;Two - Level Planning".uot;.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.178-186
• /
• 2011

Static CAD models are the CAD models that do not have feature information and modeling history. These static models are generated by translating CAD models in a specific CAD system into neutral formats such as STEP and IGES. When a CAD model is translated into a neutral format, its precious feature information such as feature parameters and modeling history is lost. Once the feature information is lost, the advantage of feature based modeling is not valid any longer, and modification for the model is purely dependent on geometric and topological manipulations. However, the capabilities of the existing methods to modify static CAD models are limited, Direct modification methods such as tweaking can only handle the modifications that do not involve topological changes. There was also an approach to modify static CAD model by using volume decomposition. However, this approach was also limited to modifications of protrusion features. To address this problem, we extend the volume decomposition approach to handle not only protrusion features but also depression features in a static CAD model. This method first generates the model that contains the volume of depression feature using the bounding box of a static CAD model. The difference between the model and the bounding box is selectively decomposed into so called the feature volume and the base volume. A modification of depression feature is achieved by manipulating the feature volume of the static CAD model.