• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.231-235
• /
• 2016

There are two methods for conducting the containment local leakage rate test (LLRT) in nuclear power plants: the make-up flow rate method and the pressure decay method. The make-up flow rate method is applied first in most power plants. In this method, the leakage rate is measured by checking the flow rate of the make-up flow. However, when it is difficult to maintain the test pressure because of excessive leakage, the pressure decay method can be used as a complementary method, as the leakage rates at pressures lower than normal can be measured using this method. We studied the method of measuring over leakage using the pressure decay method for conducting the LLRT for the containment building at a nuclear power plant. We performed experiments under conditions similar to those during an LLRT conducted on-site. We measured the characteristics of the leakage rate under varies pressure decay conditions, and calculated the compensation ratio based on these data.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.50-54
• /
• 2000

Ventilation rates can be measured directly by a tracer decay method, although little is known of the effects of different sampling intervals on decay rte calculations. This study determined variations in decay rates calculated by three techniques using residential ozone decay data. The calculation techniques were a regression technique, decay techniques using half-life and average-life, and finite difference techniques using two different time intervals. Variation associated with regression technique calculations for residential ozone decay rates based on data from both sample intervals were within 10% (2.81$\pm$1.88 hr-1). However, both half-life and finite difference technique calculations using a shorter-time interval were significantly different from those obtained with the regression technique(p<0.05). Therefore, the use of short sampling intervals in tracer decay may cause significant error in decay rate calculations.

• Journal of applied mathematics & informatics
• /
• v.6 no.1
• /
• pp.185-196
• /
• 1999

This paper is concerned with investigating the global asymptotic behavior of the solution to a nonlinear wave equation with variable coefficients. noreover an estimate of the rate of decay of the solution is obtained.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.103-122
• /
• 1993

A cause and counterplan of the increase in dark decay rate of$\varepsilon$-CuPc/PVCz photoreceptor which is consist of the carrier generation layer (CGL) of$\varepsilon$type copper phthalocyanine ($\varepsilon$-CuPc) thin film by an aqueous coating method and the carrier transport layer (CTL) of polyvinylcarbazol (PVCz) by spin coating, are studied in this paper. Electrochemical deposition of CGL was accompanied by an increase in work function of the aluminium substrate during the processes and the enhanced work function 5.3 eV rose above the ionization potential 5.16 eV of $\varepsilon$-CuPc. This resulted in the increased injection of holes from substrate into CGL and a fast dark decay rate. Improved photoreceptor, an electron-transport $\varepsilon$-CuPc/TNF photoreceptor, led to lowing of dark decay rate and increasing of photosensitivity. The carrier generation efficiency (ηg), carrier injection efficiency (ηi) and xerographic gain (G) of the $\varepsilon$-CuPc/TNF photoreceptor were obtained by XTOF method and PIDC.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.529-536
• /
• 2016

In this paper we proposed an unsupervised algorithm to estimate the reverberation time (RT) directly from the reverberant speech signal. For estimation process we use maximum likelihood estimation (MLE) which is a very well-known and state of the art method for estimation in the field of signal processing. All existing RT estimation methods are based on the decay rate distribution. The decay rate can be obtained either from the energy envelop decay curve analysis of noise source when it is switch off or from decay curve of impulse response of an enclosure. The analysis of a pre-existing method of reverberation time estimation is the foundation of the proposed method. In one of the state of the art method, the reverberation decay is modeled as a Laplacian distribution. In this paper, the proposed method models the reverberation decay as a Gamma distribution along with the unification of an effective technique for spotting free decay in reverberant speech. Maximum likelihood estimation technique is then used to estimate the RT from the free decays. The method was motivated by our observation that the RT of a reverberant signal when falls in specific range, then the decay rate of the signal follows Gamma distribution. Experiments are carried out on different reverberant speech signal to measure the accuracy of the suggested method. The experimental results reveal that the proposed method performs better and the accuracy is high in comparison to the state of the art method.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.833-840
• /
• 2008

Deoxygenation process in which CBOD(carbonaceous BOD) is biochemically oxidized to reduced inorganic compounds is of great significance in the oxygen demand of stream waters. The CBOD decay rate has traditionally been determined in a laboratory by CBOD bottle incubation method. But in this study, CBOD decay rates were obtained by laboratory incubation method and natural waters experiment. Average CBOD decay rate for the Nakdong river(upper zone) in natural waters were 0.553 $day^{-1}$ during April 2005 to January 2007. The values in the middle and down parts of the Nakdong river in natural waters were 0.384 $day^{-1}$ and 0.252 $day^{-1}$ at the same period of time, respectively. Average CBOD decay rates using by incubation method in the upper/middle/down parts of the main stream in the Nakdong river basin was 0.270 $day^{-1}$, and 0.289 $day^{-1}$, and 0.283 $day^{-1}$ during April 2005 to January 2007, respectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.503-508
• /
• 2004

Optimal remediation design using the pump and treat(P&T) method and natural attenuation was accomplished in consideration for degradation processes, such as sorption and first-order decay rate. Variation of both sorption and first-order decay rate has influence on design of optimal remediation application. When sorption effect increases, the more pumping rate and pumping wells are required. The location of operated wells is on the centerline of contaminant plume and wells near hot spot are mainly operated when sorption effect increases. The higher of first-order decay rate, the less pumping rate is required. These results show that the degradation processes have to be considered as one of the essential factors for optimal remediation design.

• Bulletin of the Korean Mathematical Society
• /
• v.61 no.3
• /
• pp.637-669
• /
• 2024

The goal of this paper is to study decay properties of weak solutions to Cauchy problem of the non-stationary fractional Navier-Stokes equations. By using the Fourier splitting method, we give the time L²-decay rate of weak solutions, which reveals that L²-decay is generally determined by its linear generalized Stokes flow. In second part, we establish various decay results and the uniqueness of the two dimensional fractional Navier-Stokes flows. In the end of this article, as an appendix, the existence of global weak solutions is given by making use of Galerkin' method, weak and strong compact convergence theorems.

• Journal of the Korean Mathematical Society
• /
• v.42 no.6
• /
• pp.1137-1152
• /
• 2005

In this article we prove the existence of the solution to the mixed problem for Euler-Bernoulli beam equation with memory condition at the boundary and we study the asymptotic behavior of the corresponding solutions. We proved that the energy decay with the same rate of decay of the relaxation function, that is, the energy decays exponentially when the relaxation function decay exponentially and polynomially when the relaxation function decay polynomially.

• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.241-250
• /
• 2021

This investigation assessed the berry quality after two months of low-temperature storage (3 ± 1℃) of 'Shine Muscat' grapes, which were treated with CPPU (N-[2-chloro-4-pyridyl]-N'-phenylurea) or TDZ (1-phenyl-3-[1,2,3-thiadiazol-5-yl] urea) in combination with gibbrellic acid (GA₃). The berry shatter rate was the lowest (1%) in 4 cm + CPPU treatment, while it was the highest (2.4%) in 3 cm floral length treated with CPPU. On the other hand, the 4 cm + TDZ treatment resulted in a shatter rate of 2.0%, which was twice as high as that observed after 4 cm + CPPU treatment. The 4 cm + TDZ treatment resulted in a 5.5% berry decay rate, which was the highest among all treatments. Alternatives to using a sulfur dioxide (SD) pad to maintain the quality of 'Shine Muscat' grapes, namely, using ethylene scrubbers (ESs, 3 g × 2 sachet) and alcohol releasers (ARs, 2 g × 2 sachet) in a 2 kg carton package for export, were explored in this study. The berry shatter rate with ES treatment (1.0%) was found to be comparable to that with SD treatment (0.6%) during three months of cold storage. Regarding the berry decay rate, that of the untreated control surged to 36.0% in the three months of storage, followed by 19.9% and 15.5% in samples subjected to AR and ES treatments respectively. Compared with the untreated control, the samples subjected to SD treatment showed a decay rate of 2.2%, which was the most effective in reducing berry decay by 95%. These results demonstrated that SD pad treatment of 'Shine Muscat' grapes was the most effective method of maintaining berry quality, and ES treatment partially reduced the berry shatter and berry decay rates.