• Title/Summary/Keyword: De re

Search Result 205, Processing Time 0.024 seconds

Trends in Data Privacy Protection Technologies with Enhanced Utilization (활용성 강화 데이터 프라이버시 보호 기술 동향)

  • Kim, J.Y.;Jho, N.S.;Chang, K.Y.
    • Electronics and Telecommunications Trends
    • /
    • v.35 no.6
    • /
    • pp.88-96
    • /
    • 2020
  • As the usability and value of personal information increase, the importance of privacy protection has increased. In Korea, the scope of the use of pseudonymized personal information has increased because of revisions to the law. In the past, security technologies were used to safely store and manage personal information, but now, security technologies focused on usability are needed to safely use personal information. In this paper, we look at issues related to the de-identification and re-identification of personal information. Moreover, we examine the standards and techniques related to the de-identification of personal information.

Dual Mass Flywheel 시스템의 설계파라미터에 관한 연구

  • 송준혁
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 1996.10a
    • /
    • pp.167-172
    • /
    • 1996
  • A Dual Mass Flywheel system is a evolution to the reduction of torsional vibration and impact noise occuring in powertrain when a vehicle is eit-her moving or idling. The name already explains what it is : The mass of the conventional single mass flywheel is divided. One section continues to belong to the mass moment of inertia of the engine-side. The ot-her section increass the mass moment of inertia of the transmission-side. The two masses are connected via a spring /damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984 Dual Mass Flywheel has been de-veloped again and again. But the prosidures of de-velopment of D.M.F system didn't have had differe-nce from conventional clutch system's trial and err-or This paper presents the method for systematical design of D.M.F system with demensionless design variables of D.M.F system mass ratio between two flywheels λ. natual frequency rate of two flywheel s, ${\gamma}$and viscosity coefficient ζ. And experimental re-sults are used to prove these theoretical results.

  • PDF

The EMTP Analysis and Characteristics of Load Impedance on Various Electrode length, Pulse Repetition in Pulse Corona Discharging (펄스코로나 방전의 전극길이, 펄스반복율에 따른 부하 임피던스 변화 특성 및 EMTP 해석)

  • Jeong, Jong-Han;Song, U-Jeong;Jeon, Jin-An;Jeong, Hyeon-Ju;Hong, Jeong-Hwan;Kim, Hui-Je
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.51 no.4
    • /
    • pp.158-163
    • /
    • 2002
  • The pulsed Power system has been widely used to many applications, such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power system, often generator, etc. In this paper, we study EMTP analysis and characteristics of critical voltage and load in impedance on various electrode length of pulse corona. To obtain a stable pulse voltage, we designed a compact pulse generator switched MOSFET and tested their characteristics by adjusting electrode length and pulse repetition. As a re sult, critical voltage of pulse corona and load impedance on increasing electrode length were decreased. These results indicate we can control critical voltage of pulse corona and suppress arc discharging between two electrodes.

Pensar la Fraternidad en la Diferencia

  • Jurado, Jenniffer Londono
    • Iberoamérica
    • /
    • v.21 no.1
    • /
    • pp.107-125
    • /
    • 2019
  • How to conceive fraternity in difference? I will hold two premises to answer this question. First: fraternity is an ineradicable element of the Political. Second: the recognition of fraternity in difference is a precondition for the consolidation of fraternal relations in Latin America in the context of coloniality. On the same path, I will show that fraternity must be thought of as difference in order to face the logic of neoliberal life imposed by capitalism in globalization. The articulation of both premises in the political praxis would contribute to the preservation of our life in common; in conditions of dignified existence. The fraters of precariousness and vulnerability are the ones who can re-establish being-with- and being-together.

AKARI-SDSS-GALEX SURVEYS: SPECTRAL ENERGY DISTRIBUTIONS OF NEARBY GALAXIES

  • Buat, V.;Yuan, F.T.;Takeuchi, T.T.;Giovannoli, E.;Heinis, S.
    • Publications of The Korean Astronomical Society
    • /
    • v.27 no.4
    • /
    • pp.317-320
    • /
    • 2012
  • A sample of nearby galaxies was built from the AKARI/FIS all sky survey cross-correlated with the SDSS and GALEX surveys. The spectral energy distributions from 0.15 to 160 microns of these galaxies are analysed to study dust attenuation and star formation properties. The calibrations of the amount of dust attenuation as a function of the IR-to-UV flux ratio and the FUV-NUV colour are re-investigated: the former one is confirmed to be robust and accurate whereas the use of the FUV-NUV colour to measure dust attenuation is found highly uncertain. The current star formation rate given by the SED fitting process is compared to that directly obtained from the UV and total IR luminosities. It leads to an accurate estimate of dust heating by old stars. We emphasize the importance of such a sample as a reference for IR selected star forming galaxies in the nearby universe.

De-interlacing and Block Code Generation For Outsole Model Recognition In Moving Picture (동영상에서 신발 밑창 모델 인식을 위한 인터레이스 제거 및 블록 코드 생성 기법)

  • Kim Cheol-Ki
    • Journal of Intelligence and Information Systems
    • /
    • v.12 no.1
    • /
    • pp.33-41
    • /
    • 2006
  • This paper presents a method that automatically recognizes products into model type, which it flows with the conveyor belt. The specific interlaced image are occurred by moving image when we use the NTSC based camera. It is impossible to process interlaced images, so a suitable post-processing is required. For the purpose of this processing, after it remove interlaced images using de-interlacing method, it leads rectangle region of object by thresholding. And then, after rectangle region is separated into several blocks through edge detection, we calculate pixel numbers per each block, re-classify using its average, and classify products into model type. Through experiments, we know that the proposed method represent high classification ratio.

  • PDF

Effect of Two Glomus Species Inoculations on Survival, Photosynthetic Capacity, Growth, Morphology ana Root Ginsenoside Content of Panax quinquefolius L.

  • Fournier, Anick R.;Khanizadeh, Shahrokh;Gauthier, Louis;Gosselin, Andre;Dorais, Martine
    • Journal of Ginseng Research
    • /
    • v.27 no.4
    • /
    • pp.178-182
    • /
    • 2003
  • Vesicular-arbuscular mycorrhizae (VAM) fungi naturally colonise American ginseng roots and this relationship is highly beneficial to enhance plant productivity. Our goal was to determine the effect of adding two Glomus species (Glomus etuticatum, G. intraradices) on survival, photosynthetic capacity, growth, morphology and root ginsenoside content of one-year-old American ginseng plants grown in a broadleaf forest. While our study revealed that VAM inoculations significantly affected root morphology and Re ginsenoside content, the survival, photosynthetic capacity and root growth of American ginseng plants were not significantly influenced by VAM inoculations. Surface area and volume of rootlets were 16-25% higher for ginseng grown in VAM-inoculated soil compared to those grown in the control plots. Also, Re ginsenoside content was 18 % higher in YAM-inoculated roots compared to controls.

Experimentally Provoked Double Axes Formation in Xenopus laevis Embryos (Xenopus Laevis Embryo에서 실험적으로 유도한 2중체축의 형성)

  • Chung, Hae-Moon;George M. Malacinski
    • The Korean Journal of Zoology
    • /
    • v.27 no.2
    • /
    • pp.93-102
    • /
    • 1984
  • Xenopus laevis eggs were de-jellied and manually manipulated to remove their vitelline membranes. They were then positioned in a variety of orientations re. gravity. That is the future ventral side was located upwards (opposed gravity) or downwards (faced gravity). Development through the tailbud stage was observed and the frequency of double axes formation recorded. Orientation of the egg re. its natural polarity was not an important factor in generating double axes. Its physical structure (flattened re. spherical), however, appeared to be important in determining the frequency of twinning. These observations give insights into the mechsnism of polarity establishment in anuran eggs, and provide methods which should be useful for studies on primary embryonic induction.

  • PDF

MAGNETIC PROPERTIES OF $REPb_{2}$(RE: LIGHT RARE-EARTH ELEMENT) COMPOUNDS

  • Hattori, Y.;Sugioka, R.;Fukamichi, K.;Suzuki, K.;Goto, T.
    • Journal of the Korean Magnetics Society
    • /
    • v.5 no.5
    • /
    • pp.753-757
    • /
    • 1995
  • Systematic studies on the crystal structure and magnetic properties of light rare earth element(RE) compounds with Pb, $REPb_{2}$, have been carried out. Their crystal structure has been identified to be a $MoSi_{2}$-type. The values of the effective magnetic moment for $CePb_{2},\;PrPb_{2}\;and\;NdPb_{2}$ are respectively very close to the theoretical values of $RE^{3+}$. These three compounds are antiferromagnetic and exhibit a metamagnetic transition. The magnitude of the Neel temperature is proportional to two-thirds of the de Gennes factor. The magnetic entropy change for $NdPb_{2}$ is contrast to the value for $CePb_{2}$ heavy-fermion compound, comparable to the theoretical value. The magnetic contribution to the temperature dependence of resistivity for $PrPb_{2}$ is given by a form of -lnT in a wide temperature range, implying the Kondo system in analogy with $Cepb_{2}$.

  • PDF

A Case Study on Re:Design Collaboration for Sustainable Fashion Industry Revitalization (지속가능한 패션산업활성화를 위한 리디자인 협업 사례분석)

  • Kim, Minji;Lee, Kyujin
    • Journal of Fashion Business
    • /
    • v.26 no.4
    • /
    • pp.136-153
    • /
    • 2022
  • The fashion industry is considered hazardous and a threatened to the environment. Due the negative perception, the industry should focus on sustainability as a social role. Therefore, several redesign fashion collaborations mainly focusing on renewing abandoned resources are already in place. The research method was based on previous studies, and 3 characteristics were derived: Redesign collaboration between fashion companies, Redesign collaboration between fashion & heterogeneous industries, and Redesign collaboration between the fashion industry & non-profit organizations. Those 3 characteristics were reviewed using 4 criteria. First, to establish and maximize the sustainable brand image and to be the best examples in environmental management, the organization endeavors to collaborate with various industries, institutions, and designers. Second is the expansion of the customer network through the spread of value consumption. Third is the creation of new values through a resource circulation structure. This means that the resource circulation structure system helps the partners to minimize on wastage. Fourth is the spread of de-boundary lines and the possibility of brand growth. Through collaboration with other industries, the boundaries of materials used in the fashion industry started to blur, thus expanding the continuous brand growth potential. The study derived the characteristics of redesign collaboration by systematically analyzing the cases. Further, the study looks forward to analyzing the characteristics of the products processed by redesign fashion collaborations in future research.