• 조명전기설비학회논문지
• /
• 제12권3호
• /
• pp.45-50
• /
• 1998

본 논문은 기존의 지중배전케이블의 준공시험으로 사용되고 있는 DC시험을 대체 하기 위한 초저주파 전원의 적용결과로서, 실험실에서 제작한 5m 길이의 실제 케이블의 칼흠집 결함과 침결함에 대해 초저주파 전원의 결함검출 능력을 평가하였다. 이 시험에서 초저주파 시험은 케이블 절연체 내부에 존재하는 결함부위에서 전기트리 개시는 어렵지만, 일단 전기트리가 개시되면 트리의 진전이 매우 빠르고 내부결함이 검출되지 않는 경우, 시험으로 인한 새로운 결함이 형성되거나 결함이 더 확대되지 않는 것으로 나타났다. 따라서 초저주파전원은 지중배전선로의 현장시험용으로 적용되기보다는 제조업체의 품질검사 확인용으로 사용하는 것이 효과적이라 판단된다.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.290-295
• /
• 2016

Socket-outlets and plugs are essential devices that supply electric power into user appliances. During plug-out operation of an engaged plug from the socket-outlet, the consistent arc between the plug and the socket-outlet could develop into heavy fires in DC systems but only a small spark in AC systems. This paper proposes a pre-/post-electrode method to prevent plugs and socket-outlets from melting by sustaining arc energy. To implement the proposed pre-/post-electrodes, an experimental plug is manufactured with two electrodes, in which a post resistance Rs is connected in between. This paper investigates the function of the post resistance Rs, in which the best value of the post resistance Rs is obtained through simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.245-246
• /
• 2013

본 논문에서는 DC배전용 전력변환장치를 모듈화하여 병렬운전을 하기 위한 새로운 Droop 제어를 제안한다. 제안한 방식은 동일용량의 모듈을 병렬로 용이하게 연결할 수 있으며 모듈간 제어진동을 최소화하고 순환전류를 억제한다. 이에 따라 병렬 운전 시스템이 갖는 과도응답 및 정상상태 특성 등을 시뮬레이션과 실험을 토대로 그 타당성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.370-376
• /
• 2009

The influence of magnetic saturation on electromagnetic field distribution in both a permanent-magnet direct-current (PMDC) motor and a field-winding (wound-field) direct-current (FWDC) motor, with the same output mechanical power, has been studied. In this paper, an approximate analytical method and time-stepping Finite Element Method (FEM) are used for prediction of Back-EMF and electromagnetic torque. No-load and rotor-lucked conditions, according to experimental measurements, and the FEM and analytical method studies of the motors have been considered. A sensitivity analysis has also been successfully accomplished on the major design parameters that affect motor performance. At last, these two DC motors are compared, in spite of their differences, on the basis of measured output characteristics.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.56-59
• /
• 2003

As electric power systems grow to supply the increasing electric power demand short-circuit current tends to increase and impose a severe burden on circuit breakers and power system apparatuses. Thus, all electric equipment in a power system has to he designed to withstand the mechanical and thermal stresses of potential short-circuit currents. Among current limiting devices, Fault Current Limiter (FCL) is expected to reduce the short-circuit current. Especially, Superconducting Fault Current Limiters (SFCL) offer ideal performance: in normal operation the SFCL is in its superconducting state and has negligible impedance, in the event of a fault, the transition into the normal conducting state passively limits the current. The SFCL using high-temperature superconductors offers a positive resolution to controlling fault-current levels on utility distribution and transmission networks. This study contributes to the EMTDC based modeling and simulation method of DC Reactor type SFCL. Single and three phase faults in the utility system with DC reactor type SFCLs have been simulated using EMTDC in order to coordinate with other equipments, and the results are discussed in detail.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.169-172
• /
• 2006

This paper presents the single-stage High Power Factor AC/DC Two-Switch Forward Converter (TSFC). Recently, due to growing concern about the harmonic pollution of power distribution systems and the adoption of standards such as ICE 61000-3-2 and IEEE 519, There is a need to reduce the harmonic contents of AC line currents of power supplies. This research proposed the single-stage two switch forward circuit for low voltage and high current output. The principle of operation, feature and design considerations are illustrated and verified through the simulation with a 200W(5V, 40A) 200kHz MOSFET based experimental circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.247-248
• /
• 2012

본 논문에서는 빌딩용 직류배전에 적용된 리던던트 전력 시스템을 제안하였다. 제안한 시스템 방식은 3상 다이오드 정류회로를 AC/DC 컨버터와 병렬로 연결하여 전력변환장치의 유지보수 시 직류전원의 무정전 공급이 가능하도록 하였다. 이에 따라 제안된 시스템의 구성에 대하여 기술하고, 시뮬레이션을 통하여 리던던트 전력 시스템의 타당성을 검증하였다.

• 산업기술연구
• /
• 제16권
• /
• pp.147-155
• /
• 1996

There is a considerable interest in tunable DFB-LD for their use in OFDM and coherent optical communications. In this paper, A modeling of ${\lambda}/4$-shifted tunable wavelength three electrode DFB-LD was performed considering the spatial hole burning within a laser diode cavity. The modeling will show design paramenters' requirement for high-speed and broad bandwidth lasers. The simulations of modeling prove that the continuous tuning range is about 3nm and the SMSR is about several dB. We showed that the optical power and carrier density distribution along z for several dc current with SHB. It was shown that prove that optical power and carrier density along cavity are changed and thismeans that modeling is correct.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.171-173
• /
• 1997

This paper presents analysis of the radial force density in brushless DC motor of which distribution is not uniform in the axial direction. The analysis considering 3D shape of teeth and overhang is not only important but essential to calculate the radial force density that acts on the teeth of stator, because it is frequent source of vibration and changes at the end of teeth. For the analysis, a new 3D equivalent magnetic circuit network method taking into account movement of the rotor without remesh is proposed. The radial force density is calculated by Maxwell stress tensor and analyzed by discrete Fourier transform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1159-1162
• /
• 1998

The induced voltage of underground pipelines caused by the stray current not only do harm to workers and instruments. but also cause big accident such as gas explosion. The AC stray current is mainly produced by the grounding system of the 22.9kV distribution power system and the DC stray current is mainly produced by the subway system. The mechanism of AC and DC induction, stray current failure examples of domestic and foreign countries and the countermeasure of the AC and DC induction are described.