• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.108-119
• /
• 2014

In this paper, through the example of international lunar exploration mission the equipment was to investigate, and the amount of data transferred per day were identified. Data storage and the data transfer rate (8.4Mbps less) for the satisfaction of the value within the range of available S and X bands was confirmed by using the communication link budget. The result is to define the range of the sensor information can be obtained, as well as from the values of the parameters calculated for the transmission communication systems will be able to define the specifications.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2393-2395
• /
• 1998

Today it is hard to imagine the operation of power network and its facilities without the control systems such as EMS/SCADA/DAS. In KEPCO, data links to the upper layer of control system (SCABA) is required to launched DAS project lately, in terms of the needs of saving cost for the data gathering facilities (RTU) in the substation that previously equipped SCADA RTU. In this Paper we researched the circumstance of the KEPCO SCADA systems for data link and present the scheme of the data link between DAS and SCADA.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.444-450
• /
• 2008

This paper studies the performance of multiuser data networks with transmit diversity under correlated fading channels. Previous work shows that correlated fading reduces the link performance of multiple antenna systems, but how correlated fading affects the throughput of multiuser data networks is still unknown since the throughput depends not only on the link performance but also on the multiuser diversity. We derive the throughput of the multiuser data networks with various transmit diversity schemes under correlated fading channels. The impact of correlated fading on the throughput is investigated. Analytical and simulation results show that, although correlated fading is harmful for link performance, it increases the throughput of the multiuser data networks if the transmit scheme is appropriately selected.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.250-253
• /
• 2024

This paper proposes a low-power waveform for a long-range air-to-air data link. In the case of an air-to-air data link, data communication is performed in the air and high Doppler shift may occur depending on the flight speed, so a waveform based on the non-coherent method is suitable. In addition, since it is mounted on an aircraft, it must have low power characteristics. This paper proposes a waveform that combines a modulation technique based on frequency modulation and pulse position modulation that can turn on/off the transmission signal. As a result of the performance analysis, it was shown that the performance was suitable for air-to-air operation while showing low power characteristics.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.739-746
• /
• 2006

The bus probe-based link travel times were more readily available due to bus' fixed route schedule and it was different from that of taxi-based one in its value for the same link. At the same time, the bus-based one showed less accurate information than the taxi-based link travel time, in terms of reliability expressed by 1-RMSE(%) measure. The purpose of this thesis is to develop a heuristic algorithm for mixing both sources-based link travel times. The algorithm used both real-time and historical profile travel times. Real-time source used 4 consecutive periods' average and historical source used average value of link travel time for various congestion levels. The algorithm was evaluated for Seoul urban arterial network 3 corridors and 20 links. The results based on the developed algorithm were superior than the mere fusion based link travel times and the reliability amounted up to 71.45%. Some limitation and future research agenda have also been discussed.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2014

The communications link in a space program is a crucial point for upgrading its performance by handling data between spacecraft bus and payloads, because spacecraft's missions are related to the data handling mechanism using communications ports such as a controlled area network bus (CAN Bus) and a universal asynchronous receiver and transmitter (UART). The NEXTSat-1 has a lot of communications ports for performing science and technology missions. However, the top level system requirements for the NEXTSat-1 are mass and volume limitations. Normally, the communications for units shall be conducted by using point to point link which require more mass and volume to interconnect. Thus, our approach for the novel communications link in the NEXTSat-1 program is to use CAN and serializer and deserializer low voltage differential signal (SerDesLVDS) to meet the system requirements of mass and volume. The CAN Bus and SerDesLVDS were confirmed by using already defined communications link for our missions in the NEXTSat-1 program and the analysis results were reported in this study in view of data flow and size analysis.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.117-127
• /
• 2009

This study analyzed the uncertainty of the forecasted link traffic flow, and estimated of the interval link flow using Korea Transport Data Base (KTDB) to consider those risks into the feasibility study. In the paper, the uncertainty was analyzed according to the stochastic variation of the KTDB origin-destination traffic. It was found that the uncertainty of the entire network traffic forecasts was 15.4% in average,. when the stochastic variation of the KTDB was considered. The results showed that the more congested the roads were, the bigger the uncertainty of forecasted link traffic flow were found. In particular, we estimated the variance of the forecasted traffic flow, and suggested interval estimates of the forecasted traffic flow instead of point estimates which were presented in the common feasibility studies. These results are expected to contribute the quantitative evaluation of uncertain road investment projects and to provide valuable information to the decision makers for the transport investment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.68-77
• /
• 2010

Wireless sensor networks are installed in various environments and collect sensing data through wireless links. The quality of a wireless link may be unstable due to environment causes and hardware performance in wireless sensor networks. Since the change of the link quality may cause data loss, sensor nodes need to adaptively estimate the change of the link quality. Also, the routing protocol should deal with this situation. In this paper, the adaptive link quality estimation and routing scheme in the large-scale wireless sensor networks are proposed. When the quality of a link is unstable, sensor nodes agilely estimate the quality of links, and the new route is selected. When quality of a link is stable, the link quality is occasionally estimated so that the energy consumption is reduced. Moreover, sensor nodes exchange less beacons in order to reduce an overhead in dense networks. In the case of sparse network, the sensor nodes exchange more beacons for finding a better route. We prove that the proposed scheme can improve the energy efficiency and reliability.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2016

Linked Data is a web standard data definition method devised to connect, expand resources with a standardized type. Linked Data built in various areas expands existing knowledge through an open data cloud like LOD(Linked Open Data). A project to link and service existing knowledge through LOD is under way worldwide. However, LOD project in domestic is being participated in a specific field to the level of research. In this paper, we suggests a method to build the area of technical knowledge like legislations in type of Linked Data, and distribute such Linked Data built to LOD. The construction method suggested by this paper divides knowledge of legislations in structural, semantic, and integrated perspective, and builds each of them by converting to Linked Data according to the perspective. Also, such built Linked Legal Data prepares to link knowledge in a standardized type by distributing them onto LOD. Built Linked Legal Data are equipped with schema for link service in various types, and give help increase understand the access type to existing legal information.