• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.388-394
• /
• 2008

In this paper, MAC(Medium Access Control) algorithm for the IEEE 802.11 DCF(Distributed Coordination Function) improving the performance is proposed and analyzed by simulation. The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF(Point Coordination function). The DCF controls the transmission based on CSMA/CA(Carrier Sense Multiple Access With Collision Avoidance). The DCF shows excellent performance relatively in situation that competition station is less but has a problem that performance is fallen from throughput and delay viewpoint in situation that competition station is increased. This paper proposes an enhanced DCF algorithm that increases the CW to maximal CW after collision and decreases the CW smoothly after successful transmission in order to reduce the collision probability by utilizing the current status information of WLAN. To prove efficiency of proposed algorithm, a lots of simulations are conducted and analyzed.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.283-285
• /
• 2005

This paper presents a new two-terminal numerical algorithm for fault location estimation and for faults recognition using the synchronized phasor in time-domain. The proposed algorithm is also based on the synchronized voltage and current phasor measured from the PMUs(Phasor Measurement Units) installed at both ends of the transmission lines. Also the arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent or transient. In this paper the algorithm is given and estimated using DFT(Discrete Fourier Transform) and the LES(Least Error Squares Method). The algorithm uses a very short data window and enables fast fault detection and classification for real-time transmission line protection. To test the validity of the proposed algorithm, the Electro-Magnetic Transient Program(EMTP/ATP) and MATLAB is used.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.34-41
• /
• 2011

The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF. The DCF uses BEB backoff algorithm based on CSMA/CA. The BEB backoff algorithm shows excellent performance relatively in situation that competition between stations is less, but its performance is decreases as the competition increases. This paper proposes and analyses mathematically an enhanced backoff algorithm. To reduce the collision probability, the proposed algorithm increases the contention window to maximum after collision and decreases the contention window smoothly after successful transmission. To prove efficiency of proposed algorithm, simulations are conducted and analyzed.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.63-71
• /
• 2003

In this paper, we propose an DSR(Dynamic Source Routing) protocol to support QoS for reliable data transmission in the mobile ad-hoc network. The proposed algorithm uses DSR protocol to support QoS as its basic routing protocol, and uses the nodes which are between source and destination nodes as key QoS support. Because of moving nodes there is some problem that is restricted reliable data transmission. For solve this problem, source node set up the QoS link with destination node. The nodes that are located at QoS link and find out loss of transmission path save the transmitting data packets. Those search a new transmission path to destination node and transmit the saved data packet to destination node. As the result of evaluation, we found the proposed QoS network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 96% data reception rate, which is improvement of 3.7737% reception rate compared with none QoS network, for continuously fast moving mobile ad-hoc network.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.156-164
• /
• 2002

IPSec is a protocol which provides data encryption, message authentication and data integrity on public and open network transmission. In IPSec, ESP protocol is used when it needs to provide data encryption, authentication and Integrity In real transmission packets. ESP protocol uses DES-CBC encryption mode when sender encrypts packets and receiver decrypts data through this mode IV is used at that time. This value has many tasks of attack during transmission by attacker because it is transferred clean and opened. If IV value is modified, then decryption of ESP data is impossible and higher level information is changed. In this paper we propose a new algorithm that it encrypts IV values using DES-ECB mode for preventing IV attack and checks integrity of whole ESP data using message authentication function. Therefore, we will protect attacks of IV and data, and guarantee core safe transmission on the public network.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.259-269
• /
• 2018

Multipath TCP (MPTCP) can be expected to provide improved network performance because it transmits data through multiple paths. However, Bufferbloat, which unexpectedly occurs in the transmission path, degrades not only the performance of the corresponding path but also the performance of other paths, so that the performance is worse than that of a single TCP. In this paper, we propose the transmission status monitoring method at the sender's MPTCP level and also HoL packets retransmission algorithm in order to solve the Bufferbloat problem. The proposed algorithm enables Bufferbloat detection by the sender side independently, and it can resolve the HoL blocking problem by identifying the HoL packet in the proposed transmission status monitoring buffer and retransmitting it to the normal path. Simulation results based on NS-3 show that the proposed algorithm achieves the improved throughput performance up to 22.8% compared to the existing MPTCP, and the average number of queued packets in the sender and receiver's buffers is decreased to 44.3% and 9.2%, respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.495-500
• /
• 2020

VANET (Vehicular Ad Hoc Network), an example of an ad hoc vehicular networks, becomes one of the popular research areas together with the self-driving cars and the connected cars. In terms of the VANET implementation, the traditional TCP/IP protocol stack could be applied to VANET. Recently, CCN (Content Centric Networking) shows better possibility to apply to VANET, called VCCN (VANET over CCN). CCN maintains several data tables including CS (Content Store) which keeps track of the currently requested content segments. When the CS becomes full and new content should be stored in CS, a replacement algorithm is needed. This paper compares and contrasts four replacement algorithms. In addition, it analyzes the transmission characteristics in diverse network conditions. According to the simulation results, LRU replacement algorithm shows better performances than the remaining three algorithms. In addition, even the size of CS is small, the network maintains a reasonable transmission performance. As the CS size becomes larger, the transmission rate increases proportionally. The transmission performance decreases when the network is crowded as well as the number of transmission hops becomes large.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.33-40
• /
• 2007

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. Among them are CBA, MCBA, MVBA and others. However, these smoothing algorithms produce a transmission plan where extra bandwidth in server is not considered. This may cause difficulty in providing videos to many clients in a server. In this paper, we propose the smoothing algorithm with monotonic transmission rate increase and abrupt transmission rate decrease, in order to provide videos to as many clients in server with limited network bandwidth as possible. In order to show the performance of our proposed algorithm, various evaluation factors were used such as the maximum number of clients, the average number of clients, and so on. Experiments demonstrated that the proposed algorithm outperformed other algorithms in evaluation factors such as the maximum number of clients and the average number of clients.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.587-594
• /
• 2012

IEEE 802.15.6 standard technology is proposed for low-power wireless communication in, on and around body, where vital signs such as pulse, blood pressure, ECG, and EEG signals are transmitted as a type of data packet. Especially, these vital signs should be delivered in real time, so that the latency from slave node to hub node can be one of the pivotal performance requirements. However, in the case of IEEE 802.15.6 technology data retransmission caused by transmission failure can be done in the next superframe. In order to overcome this limitation, we propose an adaptive polling algorithm for IEEE 802.15.6 technology. The proposing algorithm makes the hub to look for an appropriate time period in order to make data retransmission within the superframe. Through the performance evaluation, the proposing algorithm achieves a 61% and a 73% latency reduction compared to those of IEEE 802.15.6 technology in the environment of 70% traffic offered load with 10ms and 100ms superframe period. In addition, the proposing algorithm prevents bursty traffic transmission condition caused by mixing retransmission traffic with the traffic reserved for transmission. Through the proposing adaptive polling algorithm, it will be possible to transmit time-sensitive vital signs without severe traffic delay.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2553-2555
• /
• 1999

The paper contains design formulas and an execution algorithm for calculation of distributed parameters as well as wave and impedance parameters of a uniform transmission line using data of the line input impedance measurements by the OPEN-SHORT method. In difference from published before works on the OPEN-SHORT method application for line parameters determination, in which the lines with small losses are considered /1-3/, the obtained formulas allow to calculate parameters of transmission lines with arbitrary losses. It opens new possibilities of the OPEN-SHORT method utilization for development and application of the probe - type lossy dielectric media parameters meters based on transmission lines, including probe-type moisture material meters.