• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.29-37
• /
• 2019

Purpose DMIDR(Discovery Molecular Imaging Digital Ready, General Electric Healthcare, USA) is a PET/CT scanner designed to allow application of PSF(Point Spread Function), TOF(Time of Flight) and Q.Clear algorithm. Especially, Q.Clear is a reconstruction algorithm which can overcome the limitation of OSEM(Ordered Subset Expectation Maximization) and reduce the image noise based on voxel unit. The aim of this paper is to evaluate the performance of reconstruction algorithms and optimize the algorithm combination to improve the accurate SUV(Standardized Uptake Value) measurement and lesion detectability. Materials and Methods PET phantom was filled with $^{18}F-FDG$ radioactivity concentration ratio of hot to background was in a ratio of 2:1, 4:1 and 8:1. Scan was performed using the NEMA protocols. Scan data was reconstructed using combination of (1)VPFX(VUE point FX(TOF)), (2)VPHD-S(VUE Point HD+PSF), (3)VPFX-S (TOF+PSF), (4)QCHD-S-400((VUE Point HD+Q.Clear(${\beta}-strength$ 400)+PSF), (5)QCFX-S-400(TOF +Q.Clear(${\beta}-strength$ 400)+PSF), (6)QCHD-S-50(VUE Point HD+Q.Clear(${\beta}-strength$ 50)+PSF) and (7)QCFX-S-50(TOF+Q.Clear(${\beta}-strength$ 50)+PSF). CR(Contrast Recovery) and BV(Background Variability) were compared. Also, SNR(Signal to Noise Ratio) and RC(Recovery Coefficient) of counts and SUV were compared respectively. Results VPFX-S showed the highest CR value in sphere size of 10 and 13 mm, and QCFX-S-50 showed the highest value in spheres greater than 17 mm. In comparison of BV and SNR, QCFX-S-400 and QCHD-S-400 showed good results. The results of SUV measurement were proportional to the H/B ratio. RC for SUV is in inverse proportion to the H/B ratio and QCFX-S-50 showed highest value. In addition, reconstruction algorithm of Q.Clear using 400 of ${\beta}-strength$ showed lower value. Conclusion When higher ${\beta}-strength$ was applied Q.Clear showed better image quality by reducing the noise. On the contrary, lower ${\beta}-strength$ was applied Q.Clear showed that sharpness increase and PVE(Partial Volume Effect) decrease, so it is possible to measure SUV based on high RC comparing to conventional reconstruction conditions. An appropriate choice of these reconstruction algorithm can improve the accuracy and lesion detectability. In this reason, it is necessary to optimize the algorithm parameter according to the purpose.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2019

Chest digital tomosynthesis has become a practical imaging modality because it can solve the problem of anatomy overlapping in conventional chest radiography. However, because of both limited scan angle and finite-size detector, a portion of chest cannot be represented in some or all of the projection. These bring a discontinuity in intensity across the field of view boundaries in the reconstructed slices, which we refer to as the truncation artifacts. The purpose of this study was to reduce truncation artifacts using a weighted normalization approach and to investigate the performance of this approach for our prototype chest digital tomosynthesis system. The system source-to-image distance was 1100 mm, and the center of rotation of X-ray source was located on 100 mm above the detector surface. After obtaining 41 projection views with ${\pm}20^{\circ}$ degrees, tomosynthesis slices were reconstructed with the filtered back projection algorithm. For quantitative evaluation, peak signal to noise ratio and structure similarity index values were evaluated after reconstructing reference image using simulation, and mean value of specific direction values was evaluated using real data. Simulation results showed that the peak signal to noise ratio and structure similarity index was improved respectively. In the case of the experimental results showed that the effect of artifact in the mean value of specific direction of the reconstructed image was reduced. In conclusion, the weighted normalization method improves the quality of image by reducing truncation artifacts. These results suggested that weighted normalization method could improve the image quality of chest digital tomosynthesis.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.59-70
• /
• 2011

The purpose of this study is to present raw data to systematically and rationally manage the protected trees located in Changwon-si, Korea. This study investigated about the present condition and the information of location, individual, management, health and soil. The results are as follows. The protected trees were located in 26 spots, and species of trees were 9 taxa; Zelkova serrata, Celtis sinensis, Aphananthe aspera, Ginkgo biloba, Carpinus tschonoskii, Pinus densiflora for. multicaulis, Quercus variabilis, Pinus densiflora and Salix glandulosa. In protected tree types, shade trees were the most, and the majority of theirs were 200 years or more in age. The range of altitude was 14~173m, and the number of trees located in flat fields was the most. For location types, village and field and mountain were presented in the order and, in land use, land for building was the most. The range of height was 8.0~30.0m, 0.6~5.1m in crown height, 240~700cm in diameter of breast and 210~800cm in diameter of root. In case of crown area, Zelkova serrata of No.5 was most large. The status boards were mostly installed except No.23 and No.26. The sites with fence were 9 spots, and the site with stonework were 14 spots. The sites with the support beam were 5 spots, and most sites were not covered up with soil. The materials of bottom were soil, gravel and vegetation in the order. The range of withering branch rate was 0~40%, and peeled bark rate was 0~60%. The sites made holes were 23 spots, and the hole size of Aphananthe aspera of No.12 was the largest. The sites disturbed by human trampling were 7 spots, the sites by disease and insects of 2 spots, the sites by injury of 23 spots and the sites by exposed roots of 13 spots. In the results of soil analysis, there showed that acidity was pH 4.5~8.0, organic matter content of 3.5~69.8g/kg, electrical conductivity(EC) of 0.11~2.87dS/m, available $P_2O_5$ of 3.0~490.6mg/kg, exchangeable K of 0.10~1.05cmol+/kg, exchangeable Ca of 1.41~16.45cmol+/kg, exchangeable Mg of 0.37~1.96cmol+/kg, exchangeable Na of 0.25~2.41cmol+/kg and cation exchange capacity(C.E.C) of 8.35~26.55cmol+/kg.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.3
• /
• pp.11-28
• /
• 2021

Due to its size and complex characteristics, it is not often to newly create a large park within an existing urban area. Also, there has been a lack of research on the planting design methodologies for a large park. This study aims to elucidate how ecological ideas can be applied to planting practice from a designer's perspective, and eventually suggest a planting design framework in the actual case, the Central Park in the City of Gwangju. This framework consists of spatial structure of planting area in order to connect and unite the separated green patches, to adapt to the changes of existing vegetation patterns, to maintain the visual continuity of landscape, and to organize the whole open space system. The framework can be provided for the spatial planning and planting design phase in which the landscape designer flexibly uses it with the design intentions as well as with an understanding of the physical, social, and aesthetic characteristics of the site. The significance of this approach is, first that it can maintain ecological and visual consistency of the both existing and introduced landscapes as a whole in spite of its intrinsic complexity and largeness, and second that it can help efficiently respond to the unexpected changes in the landscape. In the case study, comprehensive site analysis is conducted before developing the framework. In particular, wetlands and grasslands have been identified as potential wildlife habitat which critically determines the vegetation patterns of the green area. Accordingly, the lists of plant communities are presented along with the planting scheme for their shape, layout, and relations. The model of the plant community is developed responding to the structure of surrounding natural landscape. However, it is not designed to evolve to a specific plant community, but is rather a conceptual model of ecological potentials. Therefore, the application of the model has great flexibility by using other plant communities as an alternative as long as the characteristics of the communities are appropriate to the physical conditions. Even though this research provides valuable implications for landscape planning and design in the similar circumstances, there are several limitations to be overcome in the further research. First, there needs to be more sufficient field surveys on the wildlife habitats, which would help generate a more concrete planting model. Second, a landscape management plan should be included considering the condition of existing forest, in particular the afforested landscapes. Last, there is a lack of quantitative data for the models of some plant communities.

• Korean Journal of Plant Resources
• /
• v.34 no.1
• /
• pp.64-72
• /
• 2021

This study aimed to identify regions with a suitable growth environment for Ligusticum chuanxing Hort. and use basic data to identify appropriate cultivation and stable production strategies. Four main areas of cultivation were selected and the relationship between growth characteristics (aboveground and underground parts) and weather and soil environment was analyzed. Overall growth was found to be significantly higher in Pyeongchang. Atmospheric and soil temperatures showed a significant negative correlation with overall height from the ground, stem diameter, and growth characteristics of the underground part; leaf length and width were positively correlated. As insolation increased, the growth characteristics, excluding leaf size, showed a positive correlation. Soil characteristics such as organic matter (OM), N, P, and K showed negative correlations with the overall height of the upper part and growth characteristics of the underground part, including stem diameter. Analysis of roots indicated that OM, N, P, and K were essential and were absorbed through the soil. The OM, N, P, and K values in the Pyeongchang area, which showed the optimal growth, were lower than those in other areas. It is believed that these results can be used to select cultivation sites for L. chuanxing and establish cultivation technology in future.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.306-315
• /
• 2021

This study analyzed the effects of light-shielding curtains and halogens on spectrum when acquiring hyperspectral images in a greenhouse. The image data of tarp (1.4*1.4 m, 12%) with 30 degrees of angles was achieved three times with four conditions depending on 14 heights using the automatic image acquisition system installed in the greenhouse at the department of Southern Area of National Institute of Crop Science. When the image was acquired without both a light-shielding curtain and halogen lamp, there was a difference in spectral tendencies between direct light and shadow parts on the base of 550 nm. The average coefficient of variation (CV) for direct light and shadow parts was 1.8% and 4.2%, respective. The average CV value was increased to 12.5% regardless of shadows. When the image was acquired only used a halogen lamp, the average CV of the direct light and shadow parts were 2 .6% and 10.6%, and the width of change on the spectrum was increased because the amount of halogen light was changed depending on the height. In the case of shading curtains only used, the average CV was 1.6%, and the distinction between direct light and shadows disappeared. When the image was acquired using a shading curtain and halogen lamp, the average CV was increased to 10.2% because the amount of halogen light differed depending on the height. When the average CV depending on the height was calculated using halogen and light-shielding curtains, it was 1.4% at 0.1m and 1.9% at 0.2 m, 2 .6% at 0.3m, and 3.3% at 0.4m of height, respectively. When hyperspectral imagery is acquired, it is necessary to use a shading curtain to minimize the effect of shadows. Moreover, in case of supplementary lighting by using a halogen lamp, it is judged to be effective when the size of the object is less than 0.2 m and the distance between the object and the housing is kept constant.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.21-35
• /
• 2022

The recommended meal composition allows the general people to organize meals using the number of intakes of foods from each of six food groups (grains, meat·fish·eggs·beans, vegetables, fruits, milk·dairy products and oils·sugars) to meet Dietary Reference Intakes for Koreans (KDRIs) without calculating complex nutritional values. Through an integrated analysis of data from the 6th to 7th Korean National Health and Nutrition Examination Surveys (2013-2018), representative foods for each food group were selected, and the amounts of representative foods per person were derived based on energy. Based on the EER by age and gender from the KDRIs, a total of 12 kinds of diets were suggested by differentiating meal compositions by age (aged 1-2, 3-5, 6-11, 12-18, 19-64, 65-74 and ≥ 75 years) and gender. The 2020 Food Balance Wheel included the 6th food group of oils and sugars to raise public awareness and avoid confusion in the practical utilization of the model by industries or individuals in reducing the consistent increasing intakes of oils and sugars. To promote the everyday use of the Food Balance Wheel and recommended meal compositions among the general public, the poster of the Food Balance Wheel was created in five languages (Korean, English, Japanese, Vietnamese and Chinese) along with card news. A survey was conducted to provide a basis for categorizing nutritional problems by life cycles and developing customized web-based messages to the public. Based on survey results two types of card news were produced for the general public and youth. Additionally, the educational program was developed through a series of processes, such as prioritization of educational topics, setting educational goals for each stage, creation of a detailed educational system chart and teaching-learning plans for the development of educational materials and media.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.10-19
• /
• 2021

This study investigated the actual state and transformation of the major garden ornaments in Changdeokgung Palace(昌德宮) in the modern and contemporary period, focusing on Nakseonjae(樂善齋), Juhamnu(宙合樓), Jondeokjeong(尊德亭), and Daebodanji (大報壇址). This study can be used as useful data for establishing the restoration and maintenance plan of the garden ornaments in Changdeokgung Palace, and the main results of the study can be summarized as follows. First, according to a photo taken by the Czech Vráz, in 1901, a total of six garden ornaments, including a stone pond and odd-shaped stones, were located in the backyard of Nakseonjae. Since liberation, arbitrary relocation of garden ornaments has frequently occurred, and in the process, two odd-shaped stones, originally located on the first floor of the terraced flower bed, have been transferred to the backyard of Gyeonghungak(景薰閣). Second, unlike the late Joseon Dynasty when 「Donggwoldo(東闕圖)」 was produced, odd-shaped stones were arranged symmetrically in the backyard of Juhamnu in the early 1900s. It was a traditional style garden ornament with similar appearance, size, and design. However, all the odd-shaped stones in the backyard of Juhaumnu were relocated to other places in the 1970s and 1980s. One is located at the rear of Aeryeonjeong(愛蓮亭) through the entrance of Bingcheon(氷泉) and the vicinity of Geumcheongyo(錦川橋), and the other remains in front of the Yeongyeongdang Jangnakmun(演慶堂 長樂門). Third, among the garden ornaments located in the area of Jondeokjeong in the past, one odd-shaped stone is now relocated around the stone bridge near the pavilion and the Yeonghwadang(暎花堂) with its components separated. The bondstone near Yeonghwadang was relocated in 1990 for the purpose of installing an imitation of Angbuilgu(仰釜日晷). Another odd-shaped stone has been relocated to the front door of the Secret Garden(後苑), and now it is difficult to grasp the location. Fourth, the two bondstones remaining in the Daebodanji were actually building materials that were used as the foundation stone for the entrance pillars of the Yi Royal Office Building(李王職廳舍) during the Japanese colonial period. After liberation, the Yi Royal Office Building was reorganized into Imperial Estate Administration Office(皇室財産事務總局), and when the office building was burned down in 1960, the stone statues and foundation stones placed on the stylobate were relocated to the Daebodanji. The bondstone at Daebodanji is a representative example of construction materiasl being mistaken for gaeden ornaments.