• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2137-2142
• /
• 2012

Many studies in detection and classification of the targets in the underwater environments have been conducted for military purposes, as well as for non-military purpose. Due to the complicated characteristics of underwater acoustic signal reflecting multipath environments and spatio-temporal varying characteristics, active sonar target classification technique has been considered as a difficult technique. And it has a difficult in collecting actual underwater data. In this paper, we implemented the simulator to synthesize the active target signal, to extract feature and to classify the target in the underwater environment. In target signal synthesis, highlight and three-dimensional model are used and multi-aspect based hidden markov model is used for target classification.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.29-36
• /
• 2005

With the rapid growth of the Internet, the Internet-based robot has been realized by connecting off-line robot to the Internet. However, because the Internet is often irregular and unreliable, the varying time delay in data transmission is a significant problem for the construction of the Internet-based robot system. Thus, this paper is concerned with the development of an Internet-based robot system, which is insensitive to the Internet time delay. For this purpose, the PPS (Position Prediction Simulator) is suggested and implemented on the system. The PPS consists of two parts : the robot position prediction part and the projective virtual scene part. In the robot position prediction part, the robot position is predicted for more accurate operation of the mobile robot, based on the time at which the user's command reaches the robot system. The projective virtual scene part shows the 3D visual information of a remote site, which is obtained through image processing and position prediction. For the verification of this proposed PPS, the robot was moved to follow the planned path under the various network traffic conditions. The simulation and experimental results showed that the path error of the robot motion could be reduced using the developed PPS.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2121-2127
• /
• 2014

Analyzing the observational data of volcanic activities around the northern part of Korean peninsula, the odds of volcano eruption increases continuously. For example, the cumulative seismic moment and frequence observed near Mt. Baekdu show a sudden increased values. In this study, predicting the diffusion of volcanic ash for two cases were carried out by using interactive realtime simulator, which was developed during last 2 years as a research and development project. The first case is Sakurajima volcano (VEI=3) erupted in August 2013. The second case is assumed as the volcanic eruption at Mt. Baekdu (VEI=7) under landing circumstance of typhoon Maemi (August 2003) in Korean peninsula. The synoptic condition and ash diffusion for the two cases were simulated by WRF(Weather Research and Forecast) model and Lagrangian dispersion model, respectively. Comparing the simulated result of the first case (i.e., Sakurajima volcano) with satellite image, the diffusion pattern show acceptable result. The interactive realtime simulator can be available to support decision making under volcanic disaster around East Asia by predicting several days of ash dispersion within several minutes with ordinary desktop personal computer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.645-651
• /
• 2006

This paper discusses computer system performance evaluation and analysis by employing a simulator which able to execute a symmetric multiprocessor in machine simulation environment. We also perform a multiprocessor system analysis using SPLASH-2, which is a suite of multi-program benchmarks for multiprocessors, to perform the behavior study of the symmetric multiprocessor OS kernel, IRIX5.3. To validate the scalability of symmetric multiprocessor system, we demonstrate structure and evaluation methods for symmetric multiprocessor as well as a functionality-based software simulator, SimOS. In this paper, we examine cache miss count and stall time on the symmetric multiprocessor between the local instruction and local data, using the multi-program benchmarks such as RADIX sorting algorithm and Cholesky factorization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.698-705
• /
• 2012

In this paper, we proposed an autostereoscopic display simulator that calculates an extended intensity distribution of light emitted from respective light sources and reaching respective views in an observing area to an observing plane. It simulates intensity distribution in horizontal and vertical observing ranges from the predetermined observing plane and obtains an optimal viewing area image having quantities of light according to respective views based on the intensity distribution data. As a result of the simulation the proposed system enables guiding viewing comfort zone interactively.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.110-112
• /
• 1999

Recently the substation automation is actively researched at each country. Since the substation automation is an integrated system that consist of electrical, electronic and computer technologies, performance evaluation is very important to inspect the developed system's applicable possibility for real power system. Most studies are verified using computer simulation, because it is hard to apply them to real power systems. Therefore development of a substation simulator is necessary for the performance evaluation of many application systems such as operator aid system. This paper introduces a substation simulator. An intelligent fault diagnosis and restorative control expert system is also introduced UDP/IP is applied as a protocol for data transport between expert system and SC(station computer). As to the Graphic User Interface, C++ Language and Visual Basic is used in the Windows NT operating system together with four Pentium II systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.25-34
• /
• 2005

We had research to conduct interrelationships between sensors using postprocessing analysis with the Fuzzy-Kalman Filtering Auto-Correlation about Real Time Simulator data of the NaroSC LCS in case of a fully blind situation scenario. The conducted interrelations are same harmony with relations in scenario. We had analyzed signals of sensors reverse-using a optimization character of Fuzzy-Kalman Filter. As our research conclusion, We had recognized possibilities of signal processing about the KSLV-1, on-board payloads, general equipments of ground support which apply to multi sensor systems.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.2040-2050
• /
• 2007

In this study, we present a novel method for estimating the information of MU(motor unit) which is the basic element of human muscle by using surface EMG. Some of the method developed in this field could only estimate the numbers of MU that is activated. However, in our study the MU-simulator based on the line source model was designed to estimate the MU information including the numbers of MU and muscle fiber, conduction velocity, MU diameter, fiber diameter, and end plate position. The SMUAP(single motor unit action potential) detector was designed and CMAP(compound muscle action potential) by electrical stimulus was recorded. With these data, the MU-simulator can estimate the MU information by varying muscle paramater settings through MSE(mean square error) method. Our results shows that the proposed method can be comparable with the method of anatomical studies. Moreover, our system can be utilized to build a tool for diagnosis and treatment assessment of neuromuscular patients.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.619-626
• /
• 2002

In this study, a correlation among pressure, time and quantity of injection was organized from the laboratory tests, which were executed many times representing in-situ soil conditions carefully and then it would be applied to the in-situ soil injection simulator which will be developed for optimal injection into the ground. The sort of sample soils were both sand(A specimen) and silty sand(B specimen). Injection tests were gone into operation by compaction state, injection velocity and the depth individually. In the ground improved with permeation Infection, the relation among injection pressure of the same depth, the injected quantities and time were systematic by the depth. By defining the limit range of injection pressure and quantity about the variety of a linear equation obtained from lining each of their trend, the application of laboratory injection monitoring program and the data to evaluate its realization were produced. In the ground improved with root type injection, the relation between injection pressure and the injected quantities was irregular because fracture state occurred quickly.