• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.358-364
• /
• 2007

This paper suggests MPLS restoration method that use an aggregation tree. For the restoration of the MPLS network, this paper presents a scheme that reconstruct multiple path through aggregation tree that grow from many node to a target node. Contrary to a multicast tree where a message that send at one node is passed to a group of node, an aggregation tree is a tree that data is passed from many node to one destination node. Through an experiment we confirmed that the restoration scheme that uses aggregation tree shows taster speed comparing with the existing other restoration scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.507-517
• /
• 2003

A single fiber failure in mesh-based WDM networks may result in the loss of a large number of data. To remedy this problem, an efficient restoration algorithm for a single fiber failure in the mesh- based WDM network is necessary. We propose a new algorithm for restoration scheme in WDM networks and compare it with previous schemes. Path restoration and link restoration are two representative restoration schemes which deal with only a single link failure. In this paper, we propose two kinds of efficient restoration scheme. In the proposed schemes the restoration path for each link failure is not secured. The mesh network is decomposed into a number of small loops. In one algorithm, any link failure in a certain loop is regarded as the failure of the loop and the restoration lightpath is selected by detouring the failed loop. In another scheme any link failure in a certain loop is restored within the loop. We compare performance of the proposed schemes with conventional path restoration scheme and link restoration scheme. Simulation results show that CPU time in the proposed schemes decreases compared with that in path restoration scheme and link restoration scheme, although total wavelength mileage usage increases by 10% to 50%.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.408-416
• /
• 2012

As increasing interests for cultural content, 3D restoration about the valuable traditional architectures is in progress, nowadays. Digital restoration is generally performed with using new IT technology and equipments such as 3D scanner. From the view points of making better use of the 3D data, the methodology for 3D restoration leaves much room for improvement. When using 3D scanner, it is possible to get precise 3D data for exterior of the building but huge data size and insufficient information for the wooden intra structure might be obstacles for using them as a source of various digital contents. In traditional wooden structure, the binding rules for corresponding architectural components are important factor for realizing the architectural culture at that times. In this paper, we develop a design tool and architectural components reflecting the wooden intra structure. Moreover, we propose a new 3D restoration method from the design tool, which is good for making contents offering useful information for processes of construction and binding rule in a real time just at a glance.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.377-388
• /
• 2022

Various researches are actively studied to satisfy exponentially increasing the usage of the Internet as well as the diverse service demands. Especially the Optical Internet that delivers several Tbps through a single optical fiber requires the intelligence to satisfy the various types of survivability requirements. In the paper, a novel recovery scheme that satisfies the various restoration demands in IP over WDM networks is proposed. The scheme classifies the restoration services into three classes and applies dedicated protection and shared restoration scheme with different priorities for each class. Also, a configuration scheme for information database to support the scheme is proposed. This scheme satisfies the different degree of restoration demands in terms of restoration time, blocking rate and resource usage. With the scheme, medical data can be transmitted without loss.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.558-566
• /
• 2012

This study was conducted to offer preliminary data for a natural restoration by the actual condition survey of quarries after extracting rock materials. The mountain restoration area according to a farming and fishing village organize project was restored by green landscape after quarry. However, planting tree species were died due to poor maintenance and administration after restoration works and surface soil loss and erosion occurred during a summer rainfall season because of poor slope greening. It will be needed to review restoration constructions to establish a natural friendly and flawless construction through the selection of optimum restoration works and the examination of soil and geological characteristics. In addition, it is necessary to apply cost-reducing program of restoration constructions. Quarry areas could be restored by the selection of simple and optimum construction works because the most areas were dominant in earth-sand rocks, soft-rocks, and weather-rocks. In addition, the restoration construction project should be examined thoroughly by restoration specialists during green restoration planning and review processes.

• Water Engineering Research
• /
• v.6 no.4
• /
• pp.179-187
• /
• 2005

This paper introduces the Cheonggye-cheon restoration project. The restoration project aims to revive the 600-year-old city of Seoul by recovering the historical heritage, guaranteeing safety from the deteriorated covering structures, creating the environment-friendly space, and revitalizing the neglected city centers. In order to understand the current hydrological cycle of the Chenggye-cheon watershed, the annual water balance of the region was calculated using the observed data including precipitation, runoff, water supply and sewage, and the changes in the groundwater level. The $2001{\sim}2002$ data were used to calibrate the WEP, and the $2003{\sim}2004$ data were used to verify the WEP. The calibration and validation results for the flood hydrograph how a reasonable value (at Majanggyo station, the R2 for the calibration period was 0.9, and that for the validation period was 0.7). According to the annual water balance of the Cheonggye-cheon watershed for 2004, the amount of surface runoff, infiltration, and evapotranspiration was 1,097mm, 216mm and 382mm, respectively, for an annual precipitation of 1,499mm. The application results from WEP, a distributed hydrological model, provide more detailed information of the watershed, and the model will be useful for improving the hydrological cycle in urban watershed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.18-23
• /
• 2006

This paper presents an operator training simulator for power system restoration against massive blackout. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using power flow calculation methodology, and PSS/E data is used to set up the initial state for easy setting. The proposed simulator consists of three major components-a power flow(PF), a data conversion(CONV), and, a GUI module. The PF module calculates power flow, and then checks over-voltages of buses and overloads of lines. The CONV module composes a Y-Bus array and a database at each restoration action. The initial Y-Bus array is composed from PSS/E data. A user friendly GUI module is developed including a graphic editor and a built-in operation manual. The maximum processing time for one step operation is 15 seconds, which is adequate for training purpose.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1507-1515
• /
• 2008

It is essential for electric power companies to have a quick restoration system of the faulted pole transformers which occupy most of transformers to supply stable electricity. However, it takes too much time to restore it when a transformer is out of order suddenly because we now count on operator in investigating causes of failure and making decision of recovery methods. This paper presents the concept of 'Fault pattern analysis and Restoration prediction model using Data mining techniques’, which is based on accumulated fault record of pole transformers in the past. For this, it also suggests external and internal causes of fault which influence the fault pattern of pole transformers. It is expected that we can reduce not only defects in manufacturing procedure by upgrading quality but also the time of predicting fault patterns and recovering when faults occur by using the result.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.27-34
• /
• 2023

This paper studied the 3D modeling process for the restoration of the 'Three-story Stone Pagoda of Bulguksa Temple in Gyeongju', a stone pagoda from the Unified Silla Period, using artificial intelligence (AI). Existing 3D modeling methods generate numerous verts and faces, which takes a considerable amount of time for AI learning. Accordingly, a method of performing more efficient 3D modeling by lowering the number of verts and faces is required. To this end, in this study, the structure of the stone pagoda was deeply analyzed and a modeling method optimized for AI learning was studied. In addition, it is meaningful to propose a new 3D modeling methodology for the restoration of stone pagodas in Korea and to secure a data set necessary for artificial intelligence learning.

• Journal of Korean Dental Science
• /
• v.17 no.3
• /
• pp.121-137
• /
• 2024

It is possible to design dental prosthesis in harmony with the patient's face and functional pathway using virtual patient created by integrating 3D diagnostic data such as intraoral scan, facial scan and jaw motion data. Also, esthetic teeth-gingiva relationship can be obtained, and post-surgical gingival outline can be predicted by using CAD software designed 3D surgical template during gingivectomy procedure. In this case report, 3D diagnostic data was collected from patients in need of esthetic anterior restoration, integrated on CAD software and applied to virtual articulator. Treatment outcome was simulated by creating virtual patient with dynamic occlusion. Esthetic anterior fixed restoration was fabricated by applying 3D surgical template designed on CAD software to gingivectomy procedure. To make sure that anterior guidance was formed in harmony with the patient's function pathway, occlusion was assessed following every step. The results were both functionally and esthetically satisfying.