• 제목/요약/키워드: Data error rate

검색결과 1,989건 처리시간 0.032초

응답 거부와 부재율이 무응답 오차에 미치는 영향: 경제활동인구조사를 중심으로 (The Effect of Survey Refusal and Noncontact on Nonresponse Error: For Economically Active Population Survey)

  • 김서영;권순필
    • 응용통계연구
    • /
    • 제22권3호
    • /
    • pp.667-676
    • /
    • 2009
  • 본 논문은 조사원이 기록한 가구의 현장방문내용을 분석함으로써 응답자의 부재(noncontact)와 거부(refusal)가 무응답 오차에 미치는 영향을 살피고자 한다. 통계 자료의 품질은 무응답률과 무응답 오차에 의해 결정되고, 응답률은 통계자료의 신뢰성 평가를 위한 척도로 사용되기도 한다. 가구를 대상으로 하는 조사에서 무응답 유형은 크게 부재와 거부의 형태로 나뉘고, 이들 무응답 유형이 무응답 오차에 미치는 영향은 다르다. 이에 본 논문은 무응답 유형에 따른 무응답 편향을 측정하고, 무응답 오차에 영향을 미치는 가구의 무응답 유형을 찾는데 그 목적이 있다.

무선 ATM에서의 트래픽 형태 및 채널 오율에 기반한 적응 오류 제어 (Adaptive Error Control Based on Traffic Type and Channel Error Rate in Wireless ATM)

  • 김영웅;조동호
    • 한국통신학회논문지
    • /
    • 제24권10A호
    • /
    • pp.1532-1538
    • /
    • 1999
  • 일반적으로 무선 환경은 유선환경에 비하여 높은 오뉼을 가지기 때문에, 낮은 오율을 가지는 유선망의 DLC(Data Link Control)계층 프로토콜을 무선망에 그대로 적용하는 것은 적합하지 않다. 또한 기존의 무선망을 위한 DLC계층 프로토콜 역시 저속의 데이터 서비스에 최적화되어 있으므로, 고속화 및 멀티미디어화 되고 있는 현재의 무선 환경에는 적합하지 않다. 따라서, 오늘날의 이동통신 환경에 부합되는 새로운 DLC계층 프로토콜이 요구된다. 본 논문에서는 다양한 트래픽 속성을 지원하고, 고속 및 멀티미디어 데이터 서비스에 적합한 WATM (Wireless Asynchronous Transfer Mode)에서의 오류 제어 방안을 제시한다. 본 논문에서 제시하는 오류 제어 방안은 실시간 트래픽에 대해서 ASR ARQ(Adaptive Selective Repeat Automatic Repeat Request) 프로토콜의 ACK(acknowledgement)를 삭제하여 성능을 개선하고 오율이 클 때 FEC를 사용하여 손실율을 줄였다. 비실시간 트래픽에 대해서는 ACK를 삭제한 ASR ARQ를 사용하여 성능을 개선하고 오율이 클 때 FEC를 적용하여 지연시간을 줄였다. 시뮬레이션에 의한 성능 분석 결과, 본 논문에서 제안한 방안은 기\ulcorner의 ASR ARQ 프로토콜에 비하여 지연과 처리율 측면에서 개선된 성능을 나타내었다.

  • PDF

인공지능 기법을 이용한 홀로그래픽 데이터 스토리지 시스템의 에러 보정 (Error Correction of Holographic Data Storage System Using Artificial Intelligence)

  • 김장현;박진배;양현석;박영필
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
    • /
    • pp.2142-2143
    • /
    • 2006
  • Today any data storage system cannot satisfy all of these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanically actuating part therefore fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this research, to reduce errors of binary data stored in holographic data storage system, a new method for bit error reduction is suggested. Firstly, find fuzzy rule to use test bed system for Element of Holographic Digital Data System. Secondly, make fuzzy rule table using DNA coding method. Finally, reduce prior error element and recording digital data. Recording ratio and reconstruction ratio show good performance.

  • PDF

Error-Correcting 7/9 Modulation Codes For Holographic Data Storage

  • Lee, Kyoungoh;Kim, Byungsun;Lee, Jaejin
    • 한국통신학회논문지
    • /
    • 제39A권2호
    • /
    • pp.86-91
    • /
    • 2014
  • Holographic data storage (HDS) has a number of advantages, including a high transmission rate through the use of a charge coupled device array for reading two-dimensional (2D) pixel image data, and a high density capacity. HDS also has disadvantages, including 2d intersymbol interference by neighboring pixels and interpage interference by multiple pages stored in the same holographic volume. These problems can be eliminated by modulation codes. We propose a 7/9 error-correcting modulation code that exploits a Viterbi-trellis algorithm and has a code rate larger (about 0.778) than that of the conventional 6/8 balanced modulation code. We show improved performance of the bit error rate with the proposed scheme compared to that of the simple 7/9 code without the trellis scheme and the 6/8 balanced modulation code.

라즈베리파이를 활용한 블루투스 Smart Ready 구현 및 RSSI 오차 보정 (Bluetooth Smart Ready implementation and RSSI Error Correction using Raspberry)

  • 이성진;문상호
    • 한국멀티미디어학회논문지
    • /
    • 제25권2호
    • /
    • pp.280-286
    • /
    • 2022
  • In order to efficiently collect data, it is essential to locate the facilities and analyze the movement data. The current technology for location collection can collect data using a GPS sensor, but GPS has a strong straightness and low diffraction and reflectance, making it difficult for indoor positioning. In the case of indoor positioning, the location is determined by using wireless network technologies such as Wifi, but there is a problem with low accuracy as the error range reaches 20 to 30 m. In this paper, using BLE 4.2 built in Raspberry Pi, we implement Bluetooth Smart Ready. In detail, a beacon was produced for Advertise, and an experiment was conducted to support the serial port for data transmission/reception. In addition, advertise mode and connection mode were implemented at the same time, and a 3-count gradual algorithm and a quadrangular positioning algorithm were implemented for Bluetooth RSSI error correction. As a result of the experiment, the average error was improved compared to the first correction, and the error rate was also improved compared to before the correction, confirming that the error rate for position measurement was significantly improved.

CDMA 이동통신시스템을 위한 QoS 기반 최적 전송출력/전송률 할당 체계 (Optimal Power and Rate Allocation based on QoS for CDMA Mobile Systems)

  • 장근녕
    • 한국경영과학회지
    • /
    • 제28권4호
    • /
    • pp.1-19
    • /
    • 2003
  • This paper studies power and rate control for data users on the forward link of CDMA system with two cells. The QoS for data users is specified by delay and error rate constraints as well as a family of utility functions representing system throughput and fairness among data users. Optimal power and rate allocation problem is mathematically formulated as a nonlinear programming problem, which is to maximize total utility under delay and error rate constraints, and optimal power and rate allocation scheme (OPRAS) is proposed to obtain a good solution in a fast time. Computational experiments show that the proposed scheme OPRAS works very well and increases total utility compared to the separate power and rate allocation scheme (SPARS) which considers each cell individually.

정확히 재가중되는 온라인 전체 에러율 최소화 기반의 객체 추적 (Object Tracking Based on Exactly Reweighted Online Total-Error-Rate Minimization)

  • 장세인;박충식
    • 지능정보연구
    • /
    • 제25권4호
    • /
    • pp.53-65
    • /
    • 2019
  • 영상 기반의 보안 시스템의 증가함에 따라 각 용도마다 다른 다양한 객체들에 대한 처리들이 중요해지고 있다. 객체 추적은 객체 인식, 검출과 같은 작업들과 함께 필수적인 작업으로 다뤄진다. 이 객체 추적을 달성하기 위해서 다양한 머신러닝이 적용될 수 있다. 성공적인 분류기로써 전체 에러율 최소화(total-error-rate minimization) 기반의 방법론이 사용될 수 있다. 이 전체 에러율 최소화 기반의 방법론은 오프라인 학습을 기반으로 하고 있다. 객체 추적은 실시간으로 처리하며 갱신해야하는 것이 필수적이므로 온라인 학습(online learning)을 기반으로 하는 것이 적합하다. 온라인 전체 에러율 최소화 방법론이 개발되었지만 점근적으로 재가중되는(approximately reweighted) 작업이 포함되어 에러를 누적시킬 수 있다는 단점이 있다. 본 논문에서는 정확하게 재가중되는(exactly reweighted) 방법론을 제안하면서 온라인 전체 에러율 최소화가 달성되었다. 이 제안된 온라인 학습 방법론을 객체 추적에 적용하여 총 8개의 데이터베이스에서 다른 추적 방법론들 보다 좋은 성능이 달성되었다.

추정 BER을 이용한 다중 밴드 전송 기법의 가중치 알고리즘 연구 (A study on weighting algorithm of multi-band transmission method using an estimated BER)

  • 신지은;정현우;정지원
    • 한국음향학회지
    • /
    • 제40권4호
    • /
    • pp.359-369
    • /
    • 2021
  • 수중통신에서 빠른 채널 특성의 변화에 따른 성능 감소를 보상하기 위해, 동일한 데이터를 여러 개의 주파수 대역으로 전송하는 다중 밴드 기법을 적용한다. 그러나 다중 밴드의 적용 시 특정한 밴드의 성능 열화로 전체 성능이 감소하는 현상이 발생한다. 이를 극복하기 위해 각 밴드의 오류율을 분석하여 성능이 열악한 밴드에 낮은 가중치를 할당할 수 있다. 따라서 본 논문에서는 추정 Bit Error Rate(BER)을 이용한 가중치 설정 방법을 제안한다. 추정 BER을 이용한 가중치 설정 방식은 복호 된 데이터와 복조 후 데이터의 성능 차이를 이용하여 수신된 데이터의 신뢰도를 측정하며, 측정된 값을 이용하여 각 밴드별 가중치를 설정해 복호기로 입력하면 성능이 향상된다. 본 논문에서는 터보 부호화 기법을 적용하였으며 시뮬레이션을 이용하여 최적의 가중치 값을 설정해 해상 실험을 한 결과 추정 BER을 이용한 가중치 설정을 통해 오류를 모두 정정할 수 있었다.

무선 ATM 시스템에서 RCPSCCC(Rate Compatible Punctured Serial Concatenated Convolutional Codes)를 이용한 적응 하이브리드 ARQ 기법 (An adaptive hybrid ARQ scheme with RCPSCCC(Rate Compatible Punctured Serial Concatenated Convolutional Codes) for wireless ATM system)

  • 이범용;윤원식
    • 한국통신학회논문지
    • /
    • 제25권3A호
    • /
    • pp.406-411
    • /
    • 2000
  • 무선 ATM 시스댐에서 효율적인 데이터 전송을 위해서는 우수한 오류 정정 부호가 필요하다. 본 논문에서는 오류 정정 부호로 RCPSCCC를 사용한 적응 하이브리드 ARQ 기법을 제안한다. 이 RCPSCCC의 부호율은 채널 환경과 데이터 종류에 따라 조절된다. 레일레이와 라이시안 페이딩 채널에서 BER(Bit Error Ratio)과 WER(Word Error Ratio)의 상한계(upper bound)를 outer 부호기 와 inner 부호기 의 유효 자유거리(effective free distances)만을 사용하여 유도한다. RCPSCCC를 적응 하이브리드 ARQ 프로토콜에 적용함으로서 효율적인 데이터 전송을 할 수 있다.

  • PDF

Data Randomization Scheme for Endurance Enhancement and Interference Mitigation of Multilevel Flash Memory Devices

  • Cha, Jaewon;Kang, Sungho
    • ETRI Journal
    • /
    • 제35권1호
    • /
    • pp.166-169
    • /
    • 2013
  • In this letter, we propose a data randomization scheme for endurance and interference mitigation of deeply-scaled multilevel flash memory. We address the relationships between data patterns and the raw bit error rate. An on-chip pseudorandom generator composed of an address-based seed location decoder is developed and evaluated with respect to uniformity. Experiments performed with 2x-nm and 4x-nm NAND flash memory devices illustrate the effectiveness of our scheme. The results show that the error rate is reduced up to 86% compared to that of a conventional cycling scheme. Accordingly, the endurance phenomenon can be mitigated through analysis of interference that causes tech shrinkage.