• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.25-36
• /
• 2004

The effects of task characteristics on the relative efficiency of visual display dimension were studied using a simulated tele-robotic task. Through a conventional method of task analysis. the tele-robotic task was divided into two categories: the task element requiring focused attention (FA task) and the task element requiring global attention (CA task). Time-ta-completion data were collected for a total of 120 trials involving 10 participants. For the CA task. there was no significant difference between the multiple two-dimensional (20) display and the three-dimensional (3D) monocular display. For the FA task. however. the multiple 20 display was superior to the 3D monocular display. The results suggest that the characteristics of a given task have a considerable effect on the choice of display dimensionality and the multiple 3D display is better for human operators to effectively judge depth if the task requires frequent use of focused attention.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.193-194
• /
• 2000

We have calculated the d/p boundary values in which the low twist defect and the stripe domain defect can occur with dielectric constants and elastic constants and compared them with experimental data using the compensation factors. We estimated d/p margin for $250^{\circ}$ twist angle without experimental data and investigated qualitatively the reasonability of the behavior.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.185-192
• /
• 2013

In this paper, a clock and data recovery (CDR) circuit that supports triple data rates of 1.62, 2.7, and 5.4 Gbps for DisplayPort 1.2 standard is described. The proposed CDR circuit covers three different operating frequencies with a single VCO switching the operating frequency by the 3-bit digital code. The prototype chip has been designed and verified using a 65 nm CMOS technology. The recovered-clock jitter with the data rates of 1.62/2.7/5.4 Gbps at $2^{31}$-1 PRBS is measured to 7/5.6/4.7 $ps_{rms}$, respectively, while consuming 11 mW from a 1.2 V supply.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.615-622
• /
• 2018

Recent advancements in camera communication (CamCom) technology using visible light exploited to use display as an luminance source to modulate the data for visible light data communication. The existing display-CamCom techniques uses the selected region of interest based camera capturing approach to detect and decode the 2D color coded data on display screen. This is not effective way to do communicate when the user on mobility. This paper propose the automatic display detection using Lambertian color segmentation combined with canny edge detection algorithms for CamCom in order to avoid manual region of interest selection to establish communication link between display and camera. The automatic display detection methods fails using conventional edge detection algorithms when content changes dynamically in displays. In order to solve this problem lambertian color segmentation combined with canny edge detection algorithms are proposed to detect display automatically. This research analysed different algorithms on display edge recognition and measured the performance on rendering dynamically changing content with color code on display. The display detection rate is achieved around 96% using this proposed solutions.

• Information Display
• /
• v.16 no.3
• /
• pp.28-33
• /
• 2015

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.40-46
• /
• 2010

This paper describes a clock and data recovery (CDR) circuit that supports dual data rates of 2.7Gbps and 1.62Gbps for DisplayPort standard. The proposed CDR has a dual mode voltage-controlled oscillator (VCO) that changes the operating frequency with a "Mode" switch control. The chip has been implemented using $0.18{\mu}m$ CMOS process. Measured results show the circuit exhibits peak-to-peak jitters of 37ps(@2.7Gbps) and 27ps(@1.62Gbps) in the recovered data. The power dissipation is 80mW at 2.7Gbps rate from a 1.8V supply.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.67-74
• /
• 2006

In this paper, a tiled display system is developed to get a high-resolution image in visualization of large-scale structural analysis data with low-resolution display devices and low-cost cluster computer system. Concerning the hardware system, some of the crucial points are investigated, and a new beam-projector positioner is designed and manufactured to resolve the keystone phenomena which result in distorted image. In the development of tiled display software, Qt and OpenGL are utilized for GUI and rendering, respectively. To obtain the entire tiled image, LAM-MPI is utilized to synchronize the several sub-images produced from each cluster computer node.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.159-165
• /
• 2013

Objective: The aim of this study was to predict human performance time in finding objects on multi-display monitors using ACT-R cognitive architecture. Background: Display monitors are one of the representative interfaces for interaction between people and the system. Nowadays, the use of multi-display monitors is increasing so that it is necessary to research about the interaction between users and the system on multi-display monitors. Method: A cognitive model using ACT-R cognitive architecture was developed for the model-based evaluation on multi-display monitors. To develop the cognitive model, first, an experiment was performed to extract the latency about the where system of ACT-R. Then, a menu selection experiment was performed to develop a human performance model to find objects on multi-display monitors. The validation of the cognitive model was also carried out between the developed ACT-R model and empirical data. Results: As a result, no significant difference on performance time was found between the model and empirical data. Conclusion: The ACT-R cognitive architecture could be extended to model human behavior in the search of objects on multi-display monitors.. Application: This model can help predicting performance time for the model-based usability evaluation in the area of multi-display work environments.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.88-96
• /
• 2015

The purpose of this study is to design an authoring tool and a corresponding device for an olfactory display that can augment the immersion and reality in broadcasting services. The developed authoring tool allows an olfactory display to be properly synchronized with the existing video service by applying the standardized format using ISO/IEC 23005 (MPEG-V) and the corresponding developed scent display device. To propose the proper data format for the olfactory display, we have analyzed both the multimodal combination and the cross-modality related to the olfactory display. From the results of the analysis, we derived a set of olfactory parameters for the olfactory display that are related to emotion. The analyzed parameters related to emotion in an olfactory display are synchronization, scent intensity, scent persistence, and hedonic tone. These parameters should be controlled so that the olfactory display can be in harmony with the existing media to augment emotion. In addition, we developed a scent display device that can generate many kinds of scents and that satisfies design conditions for olfactory parameters that are for use with broadcasting services.