• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.52-60
• /
• 1991

This study was conducted to investigate the appropriate operation method minimizing the deviation between irrigation water demand and release from the reservoirs, and the simulation technique was used in the operation model. This model was applied to the grouped reservoirs system consisted of Dongsang, Daia and Keungchun reservoirs and Eowoo-weir in Chonbuk FLIA district. The results obtained in this study are summarized as follows; 1.The area above the Eowoo weir point was divided into 6 small watersheds, and daily inflows from each watershed were calculated by Tank model. It showed that the average annual runoff ratio was 40-60% respectively. 2.Based on the Blaney-Criddle formula daily water requirement of Chonbuk FLIA irrigation area was estimated, mean water requirement for paddy field during the irrigation period was 818.lmm. 3.Using the basic data such as inflow and water demand, four different release types were selected. Through the simulated operation the difference between intake water required at Eowoo-weir point and release from the 3 reservoirs was estimated. The best result was obtained when Daia and Keungchun reservoirs are operated parallelly at fixed release ratio and the release of Dongsang reservoir was determined according to the storage of Daia reservoir.

• Journal of Korea Multimedia Society
• /
• v.16 no.11
• /
• pp.1261-1271
• /
• 2013

Zoom tracking involves the automatic adjustment of the focus motor in response to the zoom motor movements for the purpose of keeping an object of interest in focus, and is typically achieved by moving the zoom and focus motors in a zoom lens module so as to follow the so-called "trace curve", which shows the in-focus motor positions versus the zoom motor positions for a specific object distance. Thus, one can simply implement zoom tracking by following the most closest trace curve after all the trace curve data are stored in memory. However, this approach is often prohibitive in practical implementation because of its large memory requirement. Many other zoom tracking methods such as GZT, AZT and etc. have been proposed to avoid large memory requirement but with a deteriorated performance. In this paper, we propose a new zoom tracking method called 'Approximate Feedback Zoom Tracking method (AFZT)' on DM36x-based IP network camera, which does not need large memory by approximating nearby trace curves, but generates better zoom tracking accuracy than GZT or AZT by utilizing focus value as feedback information. Experiments through real implementation shows the proposed zoom tracking method improves the tracking performance and works in real-time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.69-74
• /
• 1996

There levels of dietary ME (3,000, 3,200 and 3,400 kcal/kg) and four levels of Total Sulphur Amino Acid (TSAA) (0.73, 0.83, 0.93 and 1.03%) were studied in the starter period (0-3 wks) of the broilers. Three levels of dietary ME (3,000, 3,200 and 3,400 kcal/kg) combined with four levels of TSAA (0.65, 0.72, 0.79 and 0.86%) were studied in the grower period (3-6 wks). The crude protein content of the diet of the starter period was 23% while the diet of the grower period was 20%. The performance data of the starter broilers indicated that the dietary energy levels had no significant effects on body weight gain, feed intake and feed:gain ratio. However, TSAA levels had a significant influence on the growth and feed parameters. The response pattern for the grower period was similar to the starter period. The present experiment showed that in the tropics the TSAA requirement for the starter period was between 0.83 to 0.93% which is similar to the values recommended by NRC while for the grower period the TSAA requirement was between 0.79 to 0.86% at all the three energy levels which is higher than the values recommended by NRC.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.47-53
• /
• 2013

The object of this study is to define systematically for outputs of Verification Process among the system life cycle process based on ISO/IEC 15288 for power supply system, which is one of the importance sub-systems to configure the LRT system. Furthermore, to prevent various problem in advance that can occur in the Transition LRT's power supply to be completed Integration. For this purpose, traceability of verification requirement and outputs. should be managed to use verification for system requirement and data processing tool. by system engineering techniques of system life cycle process based on ISO/IEC 15288 to LRT system.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.293-302
• /
• 2011

The various information services can be delivered by smartphone through advanced high-speed mobile communication. A smartphone is a mobile device that offers more powerful computing capacity than feature phone. Therefore this device can provide such as web surfing, editing documents, playing video, and playing games. A lot of personal information stored on smartphone. Because it has High usability. Personal information Leaks if the smart phone is lost or stolen may become a big problem. In this paper we have analyzed existing method for providing secure storage and user authentication on mobile platform and derived security requirement. Therefore we propose the following scheme that satisfy security requirement. Proposed scheme providing secure storage with preventing authentication bypass, and availability from damaged data to access secure area.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.352-362
• /
• 1999

Thiopental sodium is known as ultrashort-acting barbiturates and can be employed advantageously for numerous conditions. But thiopental has the side effects of cardiovascular and respiratory systems which has barbiturates and are depend on the dose of thiopental. The side effects are reduced when the thiopental is preceded by a tranquilizer and sedative. In these drugs, benzodiazepines have the minimal effects of cardiovascular and respiratory systems. In this study, the effects of midazolam preanesthetic administration, followed by thiopental anesthetic induction, on cardiovascular system and thiopental induction requirement were studied in 14 mixed breed dogs. Cardiovascular data were recorded baseline, after premedication of saline 0.45 ml/kg or midazolam 0.1, 0.2, 0.4, 0.8 mg/kg, intubation, and 5, 10, 15, 20, 30 minutes after intubation. Extubation, head-up, sternal recombency, standing, and walking recovery times were recorded. The results were summarized as follows; (1) The 0.1, 0.2, 0.4, and 0.8 mg/kg dosages of midazolam insignificantly decreased thiopental dose requirement necessary to accomplish intubation by 6, 20, 21 and 28%. (2) The 0.1, 0.2, 0.4, and 0.8 mg/kg dosages of midazolam insignificantly reduced the times of extubation, head-up, sternal recumbency, standing, and walking recovery. (3) Midazolam was effective in reducing the frequency and duration of arrhythmia after intubation. (4) Heart rates of preanestheic midazolam administraion groups increased after thiopental injection which insignificantly changed smaller than those of control group. (5) Arterial blood pressures did not vary significantly among groups.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.4 s.13
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.171-176
• /
• 2001

The Pump/Motor Selection Program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc.. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements and calculates specific speed based on flow rate, total head and na Then the calculated specific speed is used to select pump types and rpm Prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program matches very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.2
• /
• pp.115-123
• /
• 2001

In the early stage of Web-based Instruction, it didn't gain preference in spite of it's benefit of convenience. The main reason is, I think, the lack of generality at the education system which eventually results in unsatisfactory facilities compared with the requirement of teachers and students. And the early systems don't make good use of the plenty data in distributed environment, and don't show so good reliablity due to lack of systematic design and development. In this paper, we suggest WBI developing technology using the concept of WBSE. WBI developing is consist of component of pre-developed education software, integration of component using its reusability, and production of more requirement-satisfactory education software.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.22-31
• /
• 2002

A high-speed rail system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Not only the requirements of the large-scale system dictate the contracts with the suppliers but also become the basis for the development process, project execution, system integration, and testing. The requirements database provide the system design specification of all development activities. Using the RDD-100, a systems engineering tool, the Korea next-generation high-speed rail program can establish requirements traceability and development process management in performing the enabling train technology development projects. This paper presents the results from a computer-aided systems engineering application to the Korea next-generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS(Product Breakdown Structure) management.