• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1258-1262
• /
• 2011

A new organogelator, L-Alanine dihydrazide derivative can self-assemble in various organic solvents and turned them into thermally reversible physical supramolecular organogels at extremely low concentrations (< 2 wt %). The gel-sol phase transition temperatures ($T_{GS}$) were determined as a function of gelator concentration and the corresponding enthalpies (${\Delta}H_g$) were extracted. Scanning electron microscopy (SEM) measurements revealed that the interspaces of fiber-like network structures were diminished with the increasing of the LMOG concentration. FT-IR spectroscopy studies revealed that hydrogen-bonding and hydrophobic interaction were the driving forces for the formation of the gels. Based on the data of XRD and molecular modeling, the possible packing modes for the formation of organogelator aggregates were proposed.

• 정보처리학회논문지A
• /
• 제9A권2호
• /
• pp.231-240
• /
• 2002

본 논문에서는 독립적으로 스케쥴링할 수 있는 VLIW 명령어들을 소개함으로써, 컴파일러와 프로세서에서의 스케줄링 작업을 더욱 균등하게 분배할 수 있는 프로세서 구조를 제안하였다. 제안한 APVLIW(Aggressively Packed VLIW) 프로세서의 목표는 자료종속성을 포함한 VLIW 명령어들을 독립적으로 스케줄링이다. APVLIW 프로세서는 기존의 VLIW 코드로부터 대부분의 NOP(No Operations)과 LNOP(Long NOPs) 명령어들을 제거함으로써 압축된 형태의 긴명령어 그룹을 생성한다. 본 논문에서 제안된 APVLIW 프로세서는 여러 개의 연산처리기와 동적 스케줄러의 쌍들과 자료종속성 정보를 사용하여 긴명령어내의 각 명령어를 독립적으로 스케줄링할 수 있다. 이러한 스케줄링 기법은 특히 루프를 포함한 프로그램을 실행할 때 효과적이다. 실험 결과를 통해서 캐시크기의 변화와 벤치마크 프로그램에 상관없이 APVLIW 프로세서가 VLIM 프로세서에 비하여 성능이 향상됨을 확인하였다.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.735-745
• /
• 1997

In this study, the compressibility of resin was considered in filling analysis to account for the possible packing type flow. A numerical simulation program employing a hybrid finite element/finite difference scheme was developed to solve Hele-Shaw flow of the compressible viscous fluid at non-isothermal conditions. To advance the melt front, a control volume approach was adopted. Thin complex 3-D shapes of cavities, runners, and sprues were discretized by employing triangular, cylindrical and/or rectangular strip elements. Mass conservation was applied to each control volume to solve for the pressure distribution. Directly applying a constant mass flow rate at the inlet removes calculation of the apparent pressure boundary conditions, resulting in better simulation condition. The Cross model was used to model viscosity and the Tait equation was employed to represent density as a function of temperature and pressure. The validity of the developed program was verified through comparisons with available data in the literature and the effect of compressibility on the pressure distribution was discussed. To reduce computation time, 1-D and 2-D elements were used instead of applying triangular elements and the numerical results were compared to each other.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2236-2257
• /
• 2020

Ransomware is malicious software that encrypts the user-related files and data and holds them to ransom. Such attacks have become one of the serious threats to cyberspace. The avoidance techniques that ransomware employs such as obfuscation and/or packing makes it difficult to analyze such programs statically. Although many ransomware detection studies have been conducted, they are limited to a small portion of the attack's characteristics. To this end, this paper proposed a framework for the behavioral-based dynamic analysis of high survivable ransomware (HSR) with integrated valuable feature sets. Term Frequency-Inverse document frequency (TF-IDF) was employed to select the most useful features from the analyzed samples. Support Vector Machine (SVM) and Artificial Neural Network (ANN) were utilized to develop and implement a machine learning-based detection model able to recognize certain behavioral traits of high survivable ransomware attacks. Experimental evaluation indicates that the proposed framework achieved an area under the ROC curve of 0.987 and a few false positive rates 0.007. The experimental results indicate that the proposed framework can detect high survivable ransomware in the early stage accurately.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.30-33
• /
• 2016

It is true that the plastic shrinkage is inevitable. Shrinkage rate in effect at the time of mold design will soon determine the size of the global product. Process for the shrinkage of the plastic that provides how made, yet it has identified a process for making the question whether the shrinkage that can be trusted, and by the experimental results were as follows: as shrinkage, see ISO but, according to circumstances the process can go to the agreement between the parties. shrinkage ratio of the pressure sensor installed in the specimen mold is essential, amount of pressure sensor is that it is appropriate approximately 2-3. proper holding pressure is a significant effect on shrinkage Mitch, so that the effect of selecting the contraction ratio data according to the appropriate holding pressure during mold making. shrinkage CAE analysis results are difficult to utilize in the mold-making chamber. Based on these results, it concluded by looking forward to the improved products produced shrinkage.

• 한국식품조리과학회지
• /
• 제29권6호
• /
• pp.795-803
• /
• 2013

This study examined the usage, perception and willingness to use beef traceability. The data were collected from 255 housewives in Busan and Gyeongnam region through a self-administered questionnaire. Frequency, Cronbach's ${\alpha}$, t test, one-way ANOVA, Duncan's multiple range test, Pearson's correlation analysis, and multiple regression analysis were conducted by SPSS Windows V.20.0. Only twelve percent of the respondents experienced to use beef traceability. Most respondents checked it by kiosk or bar code reader in a store. On the other hand, eighty-eight percent did not use beef traceability. The reasons for not usage of it were "Do not know beef traceability very well", "Do not know how to use beef traceability", and "Information from packing or counters is reliable" in order. In the level of perception of beef traceability, safety assurance was highest, followed by information quality, usefulness, and information accessibility. The percentage of correct answers of knowledge about beef traceability was not high. The multiple regression analysis showed that employment status, knowledge about beef traceability, information quality, information accessibility, and usefulness were significant factors to affect the willingness using beef traceability.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.448-457
• /
• 1998

A neural network based control algorithm with fuzzy compensation is proposed for the automated adjustment in the production of electronic end-products. The process of adjustment is to tune the variable devices in order to examine the specified performances of the products ready prior to packing. Camcorder is considered as a target product. The required test and adjustment system is developed. The adjustment system consists of a NNC(neural network controller), a sub-NNC, and an auxiliary algorithm utilizing the fuzzy logic. The neural network is trained by means of errors between the outputs of the real system and the network, as well as on the errors between the changing rate of the outputs. Control algorithm is derived to speed up the learning dynamics and to avoid the local minima at higher energy level, and is able to converge to the global minimum at lower energy level. Many unexpected problems in the application of the real system are resolved by the auxiliary algorithms. As the adjustments of multiple items are related to each other, but the significant effect of performance by any specific item is not observed. The experimental result shows that the proposed method performs very effectively and are advantageous in simple architecture, extracting easily the training data without expertise, adapting to the unstable system that the input-output properties of each products are slightly different, with a wide application to other similar adjustment processes.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.788-796
• /
• 1996

$TiO_2$ films prepared by RF magnetron sputtering, electron beam evaporation, ion assisted deposition (IAD) and sol-gel method are prepared on c-Si substrate and vitreous silica substrate respectively. From the transmission spectra of $TiO_2$ films on vitreous silica substrate in the spectral region from 190 nm to 900 nm, k($\lambda$) of $TiO_2$ is obtained. Using k($\lambda$) in the interband transition region the coefficients of the quantum mechanical dispersion relation of an amorphous $TiO_2$ and hence n($\lambda$) including the optically opaque region of above fundamental transition energy are obtained. The spectroscopic ellipsometry spectra of $TiO_2$ films in the spectral region of 1.5-5.0eV are model analyzed to get the film packing density variation versus i) substrate material, ii) film thickness and iii) film growth technique. The complex refractive index change of these $TiO_2$ films versus water condensation is also studied. Film micro-structures by SE modelling results are compared with those by atomic force microscopy images and X-ray diffraction data.

• 태양에너지
• /
• 제18권3호
• /
• pp.95-105
• /
• 1998

In this study, basic design data which were required for development of highly efficient ice storage system with low temperature latent heat were experimentally obtained. The ice storage system considered in this study was the one that has been widly used in the developed country and called the ice-on-coil type. Using the system, the ice storage performance for various design parameters which were the flow direction and the inlet temperature of the secondary fluid was tested. In addition, the timewise variation of the interface profiles between the solid and the liquid were visualized, and the heat transfer characteristics of the Phase Change Material(PCM) in the ice storage tank were Investigated. During the freezing processes in the ice storage tank with several vertical tubes, decrease of the heat transfer area and the heat resistance of the ice layer made the increasing rate of ice packing factor(IPF) less. The total freezing energy for the upward flow of the secondary fluid was higher than that for the downward flow. The average ice storage efficiency for the upward flow of the secondary fluid was higher than that for the downward flow.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.275-278
• /
• 2007

In family mold, defects are frequently occurred by an excessive packing the smaller volume cavity during molding. Although runner size could be optimized by CAE analysis or experimental data, the filling imbalance is hardly avoided in the actual injection molding process by various means. Before this study, we developed a variable-runner system for balancing the cavity-filling for three resins (ABS, LDPE, and PA66) in the family-mold, and examined the effect of cross-sectional area reduction of a runner in the system. In this study, we examined the conditions of the pressure and temperature in the system with a CAE analysis. We also analyzed the influence of the rheological characteristic of resins to the balancing-capability of the system in order to help mold designers easily adopt the variable-runner system to their design.