• International Journal of Reliability and Applications
• /
• 제14권2호
• /
• pp.107-114
• /
• 2013

Modelling of failures is an important element of reliability modelling. Empirical modelling approach suitable for complex item is explored in this paper. First step of the empirical modelling approach is to plot hazard function, density function, Weibull probability plot as well as cumulative intensity function to see which model fits best for the given data. Next step of the empirical modelling approach is select appropriate model for the data and fit the parametric model accordingly and estimate the parameters.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2328-2340
• /
• 1996

Until now, the transmission of data for VOD(Video on Demenad) was based on a real time modelling of video data. Markow Modulated Fluid Sources(MMFS) and Markow Modulated Poisson Sources(MMPS) are the most widely used modelling methods. But the charactersitics of the VBR(Variable Bit Rate) signal prevents modelling from actually being "real-time". Also these methods call for the use of large buffers for the abolishment of cell loss. These modelling methods are, of course, useful i case of teleconferences where a real time modelling of video traffic is inevitable, but they are insufficient in cases where the characteristic infomation of video traffic can be obtained beforehand-cases such as VOD. Video data is speial in that if one file is preprocessed all other products can simply be copied from that onepreprocessed file. This characteristic helps reduce the overhead arising from the job of drawing out characteristic information to almost zero. But still, compared to the existing real time modelling method data transmission using characteristic information succeeds in raising the efficiency of data transmission. In tis paper we will outline a method of dta transmission which use the characteristic information of each video stream, and evaluate this method through some experiments.periments.

• 해양환경안전학회지
• /
• 제5권1호
• /
• pp.9-18
• /
• 1999

To predict the oil spill dispersion phenomena in the ocean, the oil spill response model, which can be used for strategic purpose on the oil spill site, based on Lagrangian particle-tracking method was formulated and applied to the neighboring area with Pusan port where the oil spill incident occurred when the tanker ship No.1 Youil struck on a small rock near the Namhyungjeto on September 21, 1995. The real-time tidal currents to be required as input data of the oil spill model were obtained by the two-dimensional hydrodynamic model and the tide prediction model. Evaluation of tidal currents using observation data was successful. For wind data, other input data of oil spill model, observed data on the spot were used. To verify the oil spill model, the oil spill modelling results were compared with the field data obtained from the spill site. Compared the modelling results with the observation data, there exist some discrepancies but the general pattern of modelling results was similar to that of field observation. The modelling results on 7 days after spill occurred showed that the 40% of spilled oil is in floating, 36% in evaporated, 23% at shore, and 1% in out of boundary, respectively. According to the evaluation of weighting curves of effective components to the dispersion of oil, the winds make a 37% of contribution to the dispersion of oil, turbulent diffusion 39.5%, and tidal currents 23.5%, respectively. Provided the more accurate wind data are supported, more favorable results might be obtained.

• Coupled systems mechanics
• /
• 제11권2호
• /
• pp.121-132
• /
• 2022

Wastewater treatment plants (WWTPs) are designed and built to remove contaminants from wastewater. WWTPs are composed of various facilities equipped with hydro-mechanical and electrical equipment. This paper presents a comparison of two different approaches for WWTPs modelling. Static modelling is suitable for determining the dimensions of facilities and equipment capacity. The special significance of this approach is for the design of new plants, i.e., when a very small number of input data on the quantities and composition of the influent wastewater is available. Dynamic modelling is expensive, time consuming and requires great expertise in the use of simulators, models and very good understanding of the treatment processes. Also, dynamic modelling is very important to use for optimization, consideration of future scenarios and also possible scenarios on the plant. The comparison of two approaches was made on the input data from the biggest and most important plant in Bosnia and Herzegovina (B&H)-WWTP Butila (Sarajevo). The main idea is to show the differences between two demanding accesses. It is important to know how to apply an adequate approach to research and solve the set task. The II phase of the plant Butila, which includes the removal of nutrients, is planned in several years and therefore the importance of research has increased.

• 한국학교수학회논문집
• /
• 제4권2호
• /
• pp.27-32
• /
• 2001

The paper describes some principles how we design the mathematics curriculum through mathematical Modelling. since the motivation for modelling is that it give us a cheap and rapid method of answering illposed problem concerning the real world situations. The experiment was focussed on the possibility that they can involved in modelling problem sets and carry modelling process. The main principles could be described as follows. principle 1. we as a teacher should introduce the modelling problems which have many constraints at the begining situation, but later eliminate those constraints possibly. principle 2. we should avoid the modelling real situations which contain the huge data collection in the classroom, but those could be involved in the mathematics club and job oriented problem solving. principle 3. Analysis of modelling situations should be much emphasized in those process of mathematics curriculum principle 4. As a matter of decision, the teachers should have their own activities that do mathematics curriculum free. principle 5. New strategies appropriate in solving modelling problem could be developed, so that these could contain those of polya's heusistics

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.387-403
• /
• 2014

This paper presents a high accuracy Finite Element approach for delamination modelling in laminated composite structures. This approach uses multi-layered shell element and cohesive zone modelling to handle the mechanical properties and damages characteristics of a laminated composite plate under low velocity impact. Both intralaminar and interlaminar failure modes, which are usually observed in laminated composite materials under impact loading, were addressed. The detail of modelling, energy absorption mechanisms, and comparison of simulation results with experimental test data were discussed in detail. The presented approach was applied for various models and simulation time was found remarkably inexpensive. In addition, the results were found to be in good agreement with the corresponding results of experimental data. Considering simulation time and results accuracy, this approach addresses an efficient technique for delamination modelling, and it could be followed by other researchers for damage analysis of laminated composite material structures subjected to dynamic impact loading.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.899-902
• /
• 2006

For a quick and accurate 3D modelling of a building, laser scanning data, digital maps, aerial photographs and satellite images should be fusioned. Moreover, library establishment according to a standard structure of a building and effective texturing method are required in order to determine the structure of a building. In this study, we made a standard library by categorizing Korean village forms and presented a model that can predict a structure of a building from a shape of the roof on an aerial photo image. We made an ortho image using the high-definition digital image and considerable amount of ground scanning point cloud and mapped this image. These methods enabled a more quick and accurate building modelling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.

• 한국측량학회지
• /
• 제14권2호
• /
• pp.151-157
• /
• 1996

본 연구에서는 실험적으로 현존하는 수치지형모델 구축기법간의 정확도를 비교 분석하여 효율적인 수치지형 모델 구축방안을 제시하고, 프랙탈 기하학의 수학적 알고리즘을 응용, 터보 파스칼을 이용 3차원 프랙탈 지형 모델링 프로그램을 개발하여 지형공간정보시스템 기반의 프랙탈 지형 모델링 시스템을 구현하는 기초연구를 수행함에 목적이 있다. 연구의 결과 점 데이터와 선 데이터의 조합에 의해 불규칙삼각망을 생성하는 방법이 정확도 향상의 측면에서 가장 효율적인 방법으로 나타났으며, 프랙탈 기하학을 응용한 3-D 프랙탈 지형 모델링 시스템 개발은 프랙탈을 이용한 3차원 지 형 모델링의 가능성을 제시했다는 측면에서 기초연구로서 소기의 성과를 얻을 수 있었다.

• 한국가구학회지
• /
• 제22권4호
• /
• pp.323-329
• /
• 2011

In our country, domestic species can not be used as a structural member because we have not yet grading system. So, to utilize as a basic data of grading system, bending test and numerical modelling on structural member were conducted in this study. 35 of Douglas-fir, 2" ${\times}$ 6", span 2.4 m were tested for the bending properties, and Ansys software was used to analyze the numerical modelling on the structural members. The data of knots were inspected and applied in numerical modelling. To obtain the accuracy of analysis, nonlinear numerical analysis was carried out instead of linear numerical analysis. Ultimate load had a wide range from 4883N to 11,738 N, and maximum deformation also had a range from 26 mm to 68 mm. Average of ultimate load was 8,616 N, and that of maximum deformation was 48 mm. The distinctive features of failure types were simple tension type and cross-grain tension type. Ulitmate load and maximum deformation from numerical modelling were 7,504 N and 37 mm. The numerical modelling drawn by this study is available to all species, and reasonable prediction on the bending performance is possible with only some material properties.