• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2229-2236
• /
• 2021

In nuclear-related facilities, such as nuclear power plants, research reactors, accelerators, and nuclear waste storage sites, radiation detection, and mapping are required to prevent radiation overexposure. Sensor network systems consisting of radiation sensor interfaces and wxireless communication units have become promising tools that can be used for data collection of radiation detection that can in turn be used to draw a radiation map. During data collection, malfunctions in some of the sensors can occasionally occur due to radiation effects, physical damage, network defects, sensor loss, or other reasons. This paper proposes a reproduction strategy for radiation maps using a U-net model to compensate for the loss of radiation detection data. To perform machine learning and verification, 1,561 simulations and 417 measured data of a sensor network were performed. The reproduction results show an accuracy of over 90%. The proposed strategy can offer an effective method that can be used to resolve the data loss problem for conventional sensor network systems and will specifically contribute to making initial responses with preserved data and without the high cost of radiation leak accidents at nuclear facilities.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.678-689
• /
• 2004

The major concern of networked control system is network uncertainties such as time delay and data loss. Because these uncertainties may degrade the performance of networked control system and destabilize the entire system. Therefore, the performance and the stability variation of networked control system due to network uncertainties must be considered first in designing networked control system. In particular, the stability analysis of networked control system is most important issue since time delay and data loss can make the overall systems unstable. In this paper, we present a new stability analysis method of networked control system with time delay and data loss, which is impossible in previous works. The proposed method can determine maximum time delay and allowable transmission rate that preserve stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.441-444
• /
• 2003

Network uncertainties such as data loss and time delay can vary the stability property of networked control system. Therefore, these uncertainties must be considered first in designing networked control system. In this paper, we present a new stability analysis method of networked control system with data loss and time delay. The proposed method can determine maximum allowable time delay and minimum allowable transmission rate that preserves stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.

• Journal of dental hygiene science
• /
• v.23 no.3
• /
• pp.225-235
• /
• 2023

Background: This study aimed to analyze the effects of periodontal treatment and individual- and tooth-related factors on tooth extraction in people with disabilities. Methods: The Korea National Health Insurance claims data of individuals with disabilities aged 40~64 years with chronic periodontitis in 2008 were obtained. Of these, data on the disabled who underwent scaling/root plaining, subgingival curettage/periodontal surgery, or non-periodontal treatments, and data on their teeth were selected. The extraction of 716,688 teeth from 39,097 patients was tracked until 2018, and the patient- and tooth-level factors related to tooth loss were identified using a mixed-effect logistic regression analysis. Results: Data from approximately 17% of the teeth were extracted during a follow-up period of approximately 11 years. Among the tooth-level variables, scaling/root planing treatment at baseline and periodontal treatment during the follow-up period were associated with a lower risk of tooth loss (odds ratio=0.692 and 0.769, respectively, p<0.001). Non-vital teeth increased the risk of tooth loss by 3.159 times (p<0.001). Among the patient-level variables, females were less likely to have lost their teeth than males, and those with orthopedic impairment or brain lesions/mental disabilities, a higher age group, lower income level, or residents in medium/small cities or rural areas were more likely to have lost their teeth (p<0.001). Conclusion: Through approximately 11 years of follow-up, scaling or root planing, experience with periodontal treatment at least once, female sex, older age, lower income, smaller residential areas, type of disability, and pulp vitality were found to be associated with tooth loss in individuals with disabilities aged 40~64 years with chronic periodontitis. To prevent tooth loss in individuals with disabilities, it is necessary to establish a dental treatment plan that considers the timing of periodontal treatment and the characteristics of the patient and teeth.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.9-14
• /
• 2014

The path loss data was re-calculated according to the distance between the base station and a mobile station in the mobile telecommunications network. In this paper, the averaged path loss data was plotted with the conventional path loss models(free space, plane earth, Hata model ${\ldots}$). The standard deviations for the 2 Km, 1 Km, 0.5 Km-interval averaged path loss were 2.29 dB, 3.39 dB, 4.75 dB, respectively. Additionally, the derivative values for the 2 Km, 1 Km, 0.5 Km-interval averaged path loss were evaluated to find the positions with more than 1 times or 2times of the standard deviation. The situations with the sharply fluctuated path loss were calculated to 5 positions in the 2 Km interval, to 7 positions in the 1 Km interval, to 19 positions in the 0.5 Km interval, respectively. And, the exact distances between the base station and a mobile station were found with the sharply fluctuated path loss.

• Korean Journal of Family Medicine
• /
• v.39 no.6
• /
• pp.364-369
• /
• 2018

Background: Compared with other chronic diseases, hearing loss is generally overlooked from the perspective of disease burden. However, hearing loss is emerging as an important issue in the current society. The objective of this study was to investigate disease burdens and marginal utilities associated with hearing loss and other chronic diseases. Methods: This study analyzed the cross-sectional data of 32,986 participants aged 19 years and older who completed the Korea National Health and Nutrition Examination Surveys between 2009 and 2013. Additionally, this study used the pure tone audiometric test, European Quality of Life-Five Dimensions Questionnaire, and chronic disease status. The data were analyzed using a multiple linear regression method. Results: The data of 23,297 people who underwent a pure tone audiogram and completed the European Quality of Life-Five Dimensions Questionnaire were used in this analysis. The marginal utility of hearing loss ranked fifth among nine chronic diseases. The estimated loss of quality-adjusted life years associated with hearing loss was -93.69 years per 100,000 people, which is similar to other chronic diseases. Conclusion: This study assessed the marginal utilities and public burdens of hearing loss and eight chronic diseases in a South Korean population. Although the values may vary depending on country and race, this study may provide an indispensable foundation for more detailed studies on hearing loss.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.299-320
• /
• 2007

Smart sensors densely distributed over structures can provide rich information for structural monitoring using their onboard wireless communication and computational capabilities. However, issues such as time synchronization error, data loss, and dealing with large amounts of harvested data have limited the implementation of full-fledged systems. Limited network resources (e.g. battery power, storage space, bandwidth, etc.) make these issues quite challenging. This paper first investigates the effects of time synchronization error and data loss, aiming to clarify requirements on synchronization accuracy and communication reliability in SHM applications. Coordinated computing is then examined as a way to manage large amounts of data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.522-525
• /
• 2007

Frame Synchronization is applied to not only digital data transmission for data synchronization between transmitter and receiver but also data communication with satellite. When satellite image data with high resolution and mass storage is transmitted, hardware frame synchronizer for real-time processing or software frame synchronizer for post-processing is used. In case of hardware, processing with high speed is available but data loss may happen for Search of Frame Synchronization. In case of software, data loss does not happen but speed is relatively slow. In this paper, Pending Buffer concept was proposed to cope with data loss according to processing status of Frame Synchronization. Algorithm to process Frame synchronization with high speed using bit threshold search algorithm with pattern search technique and SIMD is also proposed.

• Journal of The Korean Astronomical Society
• /
• v.46 no.6
• /
• pp.235-242
• /
• 2013

We compare mass-loss rates of OH/IR stars obtained from radio observations with those derived from the dust radiative transfer models and IR observations. We collect radio observational data of OH maser and CO line emission sources for a sample of 1533 OH/IR stars listed in Suh & Kwon (2011). For 1259 OH maser, 76 CO(J=1-0), and 55 CO(J=2-1) emission sources, we compile data of the expansion velocity and mass-loss rate. We use a dust radiative transfer model for the dust shell to calculate the mass-loss rate as well as the IR color indices. The observed mass-loss rates are in the range predicted by the theoretical dust shell models corresponding to $\dot{M}=10^{-8}M_{\odot}/yr-10^{-4}M_{\odot}/yr$. We find that the dust model using a simple mixture of amorphous silicate and amorphous $Al_2O_3$ (20% by mass) grains can explain the observations fairly well. The results indicate that the dust radiative transfer models for IR observations generally agree with the radio observations. For high mass-loss rate OH/IR stars, the mass-loss rates obtained from radio observations are underestimated compared to the mass-loss rates derived from the dust shell models. This could be because photon momentum transfer to the gas shell is not possible for the physical condition of high mass-loss rates. Alternative explanations could be the effects of different dust-to-gas ratios and/or a superwind.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.797-803
• /
• 2012

In this paper, for minimizing the real-time operating load losses of the power transformer, a SCADA optimum operating system was developed, and the economic analyses on the test operation were performed. Transformer loss DB which reflects the economic integration operation criteria was constructed by referring the transformer manufacturer's loss data(iron loss, copper loss). Based on the loss DB, each substation transformer real-time loss was calculated according to the size of the transformer loads, and if integration or separation transformer operating conditions minimizing the loss are met, then a window pops-up and the dispatcher performs the substation equipments operation according to the procedure provided by this system. With the existing SCADA main program, the relation database of the substation facilities and integration/separation operation algorithm were developed and applied to Auto MTR Processor and pconn Processor Task module. Seven stations test data for seven months were analyzed for the economic analyses, and the results showed that Cost-Benefit ratio was 2.64, and IRR(Internal Rate of Return), 36%, which asserted the economic justification of the proposed system.