• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.6
• /
• pp.612-620
• /
• 1987

In this paper, the optical modem for data link realization is designed with the advantages of optical fiber, large bandwidth, high speed and long haul communication. Modem interface, CCITT V.24 and EIA RS-232C is adopted for the compatibility with existing systems, and biphase coding format is used for digital modulation. And also, modem has serveral loopback test facility in order to diagnose system itself. Optical transmitter and receiver are designed to have the receiving sensitivity of -30dBm at $10^-9$BER in the short wavelength region. Developed system is capable of transmitting data rate at 1200bps up to 57.6Kbps in sync., and at any bps within DC to 200Kbps in async transmission.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.41-51
• /
• 2013

This tutorial paper presents the design methodology of system-level simulators targeted for code division multiple access (CDMA) cellular standards such as EV-DO (Evolution-Data Only) and broadcast multicast service (BCMCS). The basic structure and simulation flow of system-level simulators are delineated, following the procedure of cell layout, mobile drops, channel modeling, received power calculation, scheduling, packet error prediction, and traffic generation. Packet data transmissions on the forward link of CDMA systems and EV-DO BCMCS systems are considered for modeling simulators. System-level simulators for cellular standards are modeled and developed with high-level languages and utilized to evaluate and predict air interface performance metrics including capacity and coverage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.63-71
• /
• 2005

e-VLBI was invented to enhance the efficiency of VLBI (Very-Long-Baseline Interferometry) system by transmitting the data via high speed network. Korean VLBI Network (KVN) has a plan to construct e-VLBI system named e-KVN. High speed backbone network and efficient network model are essential to implement successful e-VLBI system. This paper introduces a network model based on PC cluster technology. The present status of high speed backbone network in Korea is overviewed. We suggest that the network link via Korea Advanced Research Network (KOREN) is one of feasible way for e-KVN. We also describe the principles of e-VLBI and protocol for network transmission such as VSI-E (VLBI Standard Interface - Electronic), RTP (Real-Time Transport Protocol) and RTCP (Real-Time Transport Control protocol).

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.48-55
• /
• 2007

The system requirement definition, system configuration, major parameters for GNSS ground station development are presented in this paper. GNSS ground station system consists of the GNSS sensor station, up link station and monitoring & control system. The GNSS sensor station consists of navigation receiver subsystem which process the GPS and Galileo navigation signal, automic clock subsystem, meteorological data receiving subsystem and navigation data processing subsystem. To communicate the error correction of navigation fate, GNSS sensor station interface with GNSS Control Center.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.19-24
• /
• 2007

With recent advancement of high-speed, multi-gigabit data transmission capabilities, serial links have been more widely adopted in industry than parallel links. Since the parallel link design forces its transmitter to transmit both the data and the clock to the receiver at the same time, it leads to hardware's intricacy during high-speed data transmission, large power consumption, and high cost. Meanwhile, the serial links allows the transmitter to transmit data only with no synchronized clock information. For the purpose, clock and data recovery circuit becomes a very crucial key block. In this paper, a 5.4Gbps half-rate bang-bang CDR is designed for the applications of high-speed graphic DRAM interface. The CDR consists of a half-rate bang-bang phase detector, a current-mirror charge-pump, a 2nd-order loop filter, and a 4-stage differential ring-type VCO. The PD automatically retimes and demultiplexes the data, generating two 2.7Gb/s sequences. The proposed circuit is realized in 66㎚ CMOS process. With input pseudo-random bit sequences (PRBS) of $2^{13}-1$, the post-layout simulations show 10psRMS clock jitter and $40ps_{p-p}$ retimed data jitter characteristics, and also the power dissipation of 80mW from a single 1.8V supply.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1671-1677
• /
• 2018

The advertisement market is an industry that is heavily influenced by media changes. As the digital broadcasting has settled, TV, a typical advertisement medium, has evolved from a passive content consuming medium into a platform for operating various data services as well as broadcasting programs. These changes mean that viewers are able to actively consume TV contents including advertisement, so the broadcasting industry needs to consider about the growth strategies that link the advertisement market with data services. This study designed a digital broadcasting data service that provides supplementary information of ID advertisement with short exposure time (less than 10 seconds) and insufficient space (less than 1/4 of TV screen). Specifically, we designed the user scenario and user interface of the data service, defined representative types of ID advertisement and the supplementary information for each type, developed a method, based on the international digital broadcasting standard DVB, for providing the supplementary information to the data service.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.66-75
• /
• 2006

This paper addresses the implementation of FTTH system based on Ethernet PON technololy. This system consists of OLT and ONT. OLT supports the maximum 24 Gigabit Ethernet interfaces, and then has the flexibility and the scalability for supplying digital communication and broadcasting convergence service in the near future. OLT system consists of switch module, subscriber module, processor module, and E-PON link module, and has the operating system based on Linux. ONT is installed in customer premise to supply both IP-TV and Internet service. Also ONT has the dedicated interface for IP-TV to improve the transmission characteristics of IP-TV signal. We measure the performance of E-PON MAC through this system and then QoS control characteristics per franc in ONT by separating the virtual link for IP-TV from that for data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.39-45
• /
• 2011

The processes for manufacturing a product differ depending on the characteristics of the product, and the information used or generated by the processes also varies. To implement a flexible and configurable Manufacturing Execution System (MES), a Data Acquisition System (DAS) that takes into consideration the characteristics of the manufacturing system is required. In this study, we design an information acquisition system that can process the information on equipments of a shop floor in real-time and that is adaptive to the changes in the shop floor. The system has a data parser module for flexible processing of the equipment status, a data mapper module to link the equipment status with a manufacturing process, and an SOA-based data integration module to transmit the processed information to other information systems such as MES and ERP. From the results of pilot study, its maintenance is easy even if new equipment or new manufacturing processes are adopted or if the equipments are rearranged.