• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1184-1187
• /
• 2020

본 논문에서는 UART (Universal Asynchronous Receiver/Transmitter)와 CAN (Controller Area Network)의 장점을 활용할 수 있는 차량통신 콘트롤러를 제안한다. UART는 1대1 통신에 사용되며 데이터 유효성 검사로 패리티 비트를 사용한다. 제안하는 차량통신 콘트롤러를 사용하는 경우에는 UART를 CAN으로 변환하여 1대1 통신뿐만 아니라 버스 구조의 다중 통신도 가능하다. 또한 데이터 유효성 검사를 패리티보다 발전된 CRC (cyclic redundancy check)를 통해 수행하므로 신뢰도가 올라간다. CAN은 마이크로프로세서에 의해 제어되지만 제안하는 차량통신 콘트롤러를 사용하는 경우에는 RS-232, RS-422, RS-485를 지원하는 장치라면 무엇이든지 제어가 가능하다.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.419-427
• /
• 2018

본 연구에서는 하나의 제어보드로 여러 대의 제어 시스템을 동시에 제어 가능하도록 하는 다중채널 제어기능을 갖는 오토튜닝 온도제어기를 설계하고 구현한다. 제어기 보드는 다중채널 입력 및 출력 기능을 가지고 있으며, 여러 개의 제어 알고리듬이 서로 독립적이지만 동시에 동작하는 멀티채널 제어기이다. 먼저 다중채널 제어기능을 갖는 온도제어기 설계방법을 나타내고. 이를 구현하는 센서입력부 회로, 제어신호 출력부 회로, 파워제어부 회로 등의 하드웨어 회로를 설계한다. 또한 다중채널 온도 제어기의 성능을 모니터링 하기 위하여 온도 제어 출력신호의 직렬 통신 데이터 프로토콜을 설계하고, 구현된 다채널 온도제어기의 실제 시험을 통한 성능을 평가한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1499-1502
• /
• 2008

This paper proposes an efficient data compression for the conventional method of reducing EMI in a 10 bit LCD timing controller (TCON). In addition, we develop a new method to reduce EMI in a LCD TCON through repeated data on adjacent blocks. The novel technique reduced EMI by 10 dB for a 52" FHD 10it LCD TV.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.732-734
• /
• 2000

In this paper, we designed and made an experiment on a general analog data acquistion system. which used $\mu$-controller. Using the general purpose $\mu$-controller and simple algorithm. we could easily acquire the state of physical system and convert analog to digital data which is possible digital processing. Finally, we realized the RS232 serial communication system for more complex data processing from PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.101.5-101
• /
• 2001

A linear input/output data-based predictive control with integral action is developed. The control input is obtained directly from the input/output data in a single step. However, the state estimation in subspace identification gives a biased estimate and there is model mismatch when the controller is applied to a nonlinear process. To overcome such difficulties, we add integral action to a linear input/output data-based predictive controller by augmenting the integrated white noise disturbance model and use each of best linear unbiased estimation(BLUE) filter and Kalman filter as a stochastic observer for the unmeasured disturbance. When applied to a continuous styrene polymerization reactor the proposed controller demonstrates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2000

CNC machine tool is assembled by central processor, PLC(Programmable Logic Controller), and actuator. The sequential control of machine generally controlled by a PLC. The main fault occured at PLC in 3 control parts. In LC faults, operational fault is charged over 70%. This paper describes diagnosis model and data processing for remote monitoring and diagnosis system in machine tools with open architecture controller. Two diagnostic models based on the ladder diagram. Logical Diagnosis Model(LDM), Sequential Diagnosis Model(SDM), are proposed. Data processing structure is proposed ST(Structured Text) based on IEC1131-3. The faults from CNC are received message form open architecture controller and faults from PLC are gathered by sequential data.. To do this, CNC and PLC's logical and sequential data is constructed database.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2473-2475
• /
• 1998

In this paper, we implemented RS232C serial communication by the 2 wires(Data,GND), and multiple access, by the applying Collision Sensing Multiple Access(CSMA) Protocol. Multiple access is implemented by assigning a unique ID to each controller. The multiple access control operation starts by sending a command packet from a host to another host and the command packet is composed of ID bytes of source and target host computer, data bytes and the check sum, byte. In host computer, after sending command packet, the collision from loop back data. If collision is detected, it means a command packet was collided with another command packet for another host. The packet communication of the controller enables the multiple acces of the controller through the common serial data link. The application of this serial communication through CSMA protocol and the usage of two wires, have an effect on saving the wires and convenient of layout work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.345-347
• /
• 2006

In this paper, we study the robot controller design using the voice and data communication via CDMA(Code Division Multiple Access) mobile communication network. We design the robot remote controller using the three methods, telephone call speech recognition, DTMF (Dual Tone Multiple Frequency) realization, SMS(Short Message Service) transmission/reception way via CDMA mobile communication network. We investigate the validity and effectiveness of the proposed remote controller which applied to the mobile robot.