• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.63-81
• /
• 2013

A Study using compare and analyze about differences among three patterns(shape and size of pattern, fitting and amount of air gap and so on) through 3D simulation. This study use 3D simulation program, DC Suite version 3.0. The results are as a follows: The results of estimation about total appearance, the pattern of Bunka is best of all pattern about total fitting and silhouette of front and back side. The pattern of armstrong and on&on stand low in estimation. As the total fitting, the pattern of Bunka is 4.40, the pattern of Armstrong is 2.60 and the pattern of On&on is 1.60. The result show better pattern of Bunka than pattern of Armstrong and On&on. When we examine about space between body and cloth, the pattern of Bunka is best. The pattern of Armstrong don't have problems about back side but front side have some problem of getting loose. Because it only have a waist dart so dart size is too big. The pattern of On&on have so much space because it don't have a waist dart. On the amount of air gap, the pattern of Bunka squash up body so it have the amount of air gap 0.08 at bust circumference and underbust circumference. Next is the pattern of Armstrong, amount of air gap is 0.14 at bust circumference and 0.23 at underbust circumference. The pattern of On&on's amount of air gap is 0.30 at bust circumference and 0.37 at underbust circumference. So the pattern of Bunka is bodice block of the best closing adhesion and the On&on is a loose-fitting pattern.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.109-125
• /
• 2000

The purpose of this study was to provide basic data for a more functional torso's pattern by analyzing multidimensional anthropometric measurements and the wearing condition. For the functional torso's pattern drafting, the fitness state of basic torso's patterns(4 types) was compared and evaluated from the cross-sectioned overlap maps by $moir{\acute{e}}$ topography. The results were as follows: 1. According to the measurements of four patterns by using the one-dimensional measurement, the amount of ease in girth item for pattern A was the smallest. The ease of clothes was affected by the position of dart, the amount of dart, and the drafting method. 2. As the results of wearing evaluation by $moir{\acute{e}}$ topography method, pattern B had the largest space length for hip part, pattern A, C and D had the largest space length for bust part. Also, in the all measurement items, pattern A had the smallest amount of ease. The space length for bust and waist part of pattern B was smaller than pattern D, but, for abdomen and hip part of pattern B was larger than pattern D. The space length of pattern C was revealed intermediate for all measurement part. 3. The significant difference of space length of each pattern was shown in all parts except bust part(p<.05). The amount of space was affected by the amount of dart, the characteristics of the somatotype, and the drafting method.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.713-721
• /
• 2018

This study aimed to develop a draping manual for the basic bodice to be available in colleges and industries. For this, draping methods mentioned in six different textbooks were comparatively analyzed. As for the research method, draping methods were compared by using training textbook, and basic bodices designed with muslin were assessed using the 5-point Likert scale. First, the draping methods of basic bodices were comparatively analyzed. The main baselines were set as the center front line, the center back line, the bust line, and the shoulder blade line. The position of dart was suggested based on the princess line, in both the front and the back. The value of dart was classified as a fixed size with any associated excess. The length of dart was set based on the bust point and shoulder blade point or a fixed size. The amount of ease was randomly set based on the fixed size, bust circumference, waist circumference, interscye length, armholes and shoulder lines, or the worker's intuition. Second, according to the appearance evaluation of the patterns, the following patterns obtained the highest scores: A pattern 2.5cm away from the B.P point of the waist dart and shoulder dart in the frontal appearance, a pattern of 0.6~0.7cm ease for the front armhole, a pattern with an ease of 1.2cm in the bust and 0.6cm in the waist. As for back appearance, the pattern in which the point of waist dart is 2~3cm from the bust line received the highest score.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• 패션비즈니스
• /
• 제17권4호
• /
• pp.1-21
• /
• 2013

A study using compare and analyze about differences among three basic pants patterns(shape and size of pattern, fitting and amount of air gap and so on) through 3D simulation. This study use 3D simulation program, DC Suite version 3.0. The results are as a follows: The results of comparison about total pants pattern shape, the ESMOD have two tucks of front and one dart of back and the Secoli and On&on have each dart of front and back. The results of estimation about total appearance, the On&on is the best of all pattern about total silhouette of front and back side and the ESMOD is the worst of all. In a case of the ESMOD, the thigh part has so many spaces between body and pants so it is rated low. When we examine about space between body and pants, amount of air gap of ESMOD is 0.6 at waist circumference and next is On&on(0.07). In case of hip circumference, the Secoli is 0.08 and the ESMOD is 0.14. The ESMOD's amount of air gap is 0.32 at thigh circumference and 0.62 at knee circumference. The Secoli's amount air gap is 0.26 at thigh circumference and 0.59 at knee circumference.

• 한국콘텐츠학회논문지
• /
• 제12권9호
• /
• pp.136-145
• /
• 2012

다양한 체형을 지니고 있는 소비자들에게 만족스러운 착용감을 주는 기성복 생산을 위해서는 체형 특성이 반영된 원형 제작이 필요하다. 인체는 체형에 따라 곡면의 형태가 달라지므로, 인체의 곡면 형태를 세분화하여 그 특성을 원형 설계에 반영할 필요가 있다. 그러나 기성복에서는 개인의 체형별 특징을 일일이 반영하기 힘드므로, 기성복 원형 제작에 활용 가능한 체형별 인대 모형이 요구되고 있다. 따라서 본 연구에서는 삼차원 인체스캔 데이터를 활용하여 체형을 분석하고 각 체형에 따른 인대모형 개발 방법을 제시하였다. 30대 성인 여성의 상반신 삼차원 인체 형상 자료를 분석한 결과, 체형 특성은 보통체형, 비만체형, 마른체형으로 분류되었다. 상반신을 기준선을 두어 나누어 계측한 결과, 체형에 따라 유의적인 차이가 나타났다. 계측된 각 부위별 삼차원 인체 치수를 기본 원형 설계 시 허리다트 위치 및 분량 설정에 반영하여 체형별 상반신 기본 원형을 제작하였으며, 이를 바탕으로 입체모형을 제작하여 스캔, 모델링 작업을 거쳐 체형에 맞는 원형 인대 모형을 제시하였다. 인대 모형은 인체의 입체 형상을 만들기 위한 다트선을 포함하고 있어 기본 원형 제작 및 원형 활용에 도움이 될 것으로 사료된다.

• 복식문화연구
• /
• 제23권4호
• /
• pp.616-627
• /
• 2015

The purpose of this study was to develop slacks patterns for obese-schoolgirls aged 10~12 by using a 3D virtual garment simulation system. The criteria for subjects in this study were girls who had a BMI of over $25kg/m^2$. A total of 155 schoolgirls who met these criteria were enrolled. The results were as follows: First, by using 3D virtual garment simulation, a new slacks pattern considerate of obese-schoolgirls was developed. The basic numerical formulae were as follows: Front and back hip girth of H/4-0.5+1 and H/4+0.5+1.5, front waist girth of W/4+1+0.5, back waist girth of W/4+2+0.5, front crotch extension of H/16-0.5, back crotch extension of H/8-0.5, front dart amount of 1, and back dart amount of 2. Second, according to the new slacks pattern appearance evaluation, the new slacks pattern scored more highly than the existing pattern for silhouette and ease amount, confirming that the new slacks pattern is appropriate for obese-schoolgirls. Additionally, the new slacks pattern was evaluated allowing for the proper space length of the waist, abdomen and hips. This study is expected to serve as important basic data for ensuing studies that may utilize a 3D virtual garment simulation system with 2D patterns and for future 3D pattern production program development.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.