DOI QR코드

DOI QR Code

Development of Pattern Drafting Method for Hip-hugger Tight Skirt and Round Belt

힙 허거(hip-hugger)형 타이트 스커트 및 라운드 벨트 패턴 제도법 개발

  • Park, Soon-Jee (School of Textiles, Yeungnam University) ;
  • Kim, Hye-Jin (Dept. of Clothing & Fashion, Graduate School, Yeungnam University)
  • 박순지 (영남대학교 섬유패션학부) ;
  • 김혜진 (영남대학교 대학원 의류패션학과)
  • Received : 2011.06.17
  • Accepted : 2011.06.28
  • Published : 2011.10.31

Abstract

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

Keywords

References

  1. 김주현, 김성민, 강태진. (2003). 3차원 의복패턴의 플래트닝을 위한 최적 절개선의 결정. 한국섬유공학회 학술발표회 논문집, 36(2), pp. 309-310.
  2. 박순지, 김혜진. (2010). 밀착의형 3차원 파라메트릭 모델을 활용한 상반신 원형의 다트 및 절개분리선 설정에 관한 연구. 한국의류산업학회지, 12(4), 467-476. https://doi.org/10.5805/KSCI.2010.12.4.467
  3. 박순지, 조영한, 박정환, 김재현, 서추연, 김태규, 이희정. (2007). CAD system을 활용한 의복 패턴용 3차원 인체 스캔데이터 표면 평면화. 한국정밀공학회 2007년도 추계학술대회논문집, pp. 303-304.
  4. 박순지, 최신애. (2008). 3차원 인체 스캔 데이터를 활용한 Hip-hugger의류용 벨트 패턴 설계. 한국의류산업학회지, 10(5), 652-659.
  5. 산업자원부 기술표준원. (2005). 제 5 차 한국인 인체치수조사 자료 - 직접측정에 의한 인체치수 통계. p. 28, p. 56, p. 57, p. 59, p. 72.
  6. 서추연, 박순지. (2008). 노년여성의 3-D 입체형상 데이터를 활용한 상반신 원형 설계방법 연구. 한국의류학회지, 32(5), 846-858.
  7. 어미경. (2003). 어패럴 메이킹. 서울: 교학연구사, p. 89.
  8. 임갑택, 양정은. (2009). 고급패턴 기술교육. 대구: 한국봉제기술연구소, p. 30.
  9. 三吉滿智子. (2002). 복장조형학 이론편 I(옹혜정). 서울: 교학연구사, p. 326(원저 2000 출판).
  10. Helen Joseph Armstrong(2009). Patternmaking for fashion design. (5th ed.). NJ: Prentice Hall, p. 583.
  11. Park, S.J., & Miyoshi, M. (2003). Development of Theory and Auto CAD Program for Designing the Individual Bodice Pattern from 3D Scanning Data of Human Body. Journal of ARAHE, 10(4), 216-225.

Cited by

  1. Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric vol.14, pp.2, 2012, https://doi.org/10.5805/KSCI.2012.14.2.277
  2. Functional Underwear Development for Elderly Woman from 3D Body Model applying PCM treatment vol.18, pp.4, 2016, https://doi.org/10.5805/SFTI.2016.18.4.457