• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.33-40
• /
• 1987

To study the body trunk basic to Clothing construction, and study the peculiarities of visual spatial division, necessary items are measured indirectly from 216 unmarried women from 19 to 24 years old by a photographic net-work method. In so doing, the problem of Fashion Design in establishing the location of Darts for Basic Dress is not considered. The following results are obtained. 1) Indirect measuring method, is obtained approximate to actual size, with an error of .+-. 2.8cm. 2) In the modeling plan of Dart location viewed from the visual-spatial division in Basic Dress, it is concluded that Darts are to be placed at the point of 1/3k+1/5k form the waist. From the aesthetic point of wiew, it is more appealling for darts to be placed at the point of 6cm .+-. 0.6cm right or left of center. 3) From direct measurement dart location can be set based on bust point width, and from indirect measurement, dart location can be set based on waist width.

• ETRI Journal
• /
• 제39권2호
• /
• pp.202-212
• /
• 2017

With the advent of the Internet-of-Things paradigm, the amount of data production has grown exponentially and the user demand for responsive consumption of data has increased significantly. Herein, we present DART, a fast and lightweight stream processing framework for the IoT environment. Because the DART framework targets a geospatially distributed environment of heterogeneous devices, the framework provides (1) an end-user tool for device registration and application authoring, (2) automatic worker node monitoring and task allocations, and (3) runtime management of user applications with fault tolerance. To maximize performance, the DART framework adopts an actor model in which applications are segmented into microtasks and assigned to an actor following a single responsibility. To prove the feasibility of the proposed framework, we implemented the DART system. We also conducted experiments to show that the system can significantly reduce computing burdens and alleviate network load by utilizing the idle resources of intermediate edge devices.

• 한국의류학회지
• /
• 제18권2호
• /
• pp.189-196
• /
• 1994

The purpose of this study is to develop a computer program for automatic dart manipulation, as well as basic pattern making, of women's front bodice. In addition to accuracy and efficiency In pattern making, this computer program provides variations of basic patterns through dart manipulation. AutoCAD, running on the Austin 486DX micro-computer is used for this research. The procedures of this study are as follows : 1. A pattern-making method for women's front bodice is selected. 2. All co-ordinate points are located following the same way and order of drafting. 3. Drafting of a basic front bodice is programmed 4. Functions for various single dart manipulations are defined. 5. Menu-driven user interface is developed.

• Biomolecules & Therapeutics
• /
• 제21권6호
• /
• pp.470-475
• /
• 2013

Ultraviolet (UV) radiation is a major environmental factor that leads to acute and chronic reactions in the human skin. UV exposure induces wrinkle formation, DNA damage, and generation of reactive oxygen species (ROS). Most mechanistic studies of skin physiology and pharmacology related with UV-irradiated skin have focused on proteins and their related gene expression or single-targeted small molecules. The present study identified and analyzed the alteration of skin metabolites following UVB irradiation and topical retinyl palmitate (RP, 5%) treatment in hairless mice using direct analysis in real time (DART) time-of-flight mass spectrometry (TOF-MS) with multivariate analysis. Under the negative ion mode, the DART ion source successfully ionized various fatty acids including palmitoleic and linolenic acid. From DART-TOF-MS fingerprints measured in positive mode, the prominent dehydrated ion peak (m/z: 369, M+H-$H_2O$) of cholesterol was characterized in all three groups. In positive mode, the discrimination among three groups was much clearer than that in negative mode by using multivariate analysis of orthogonal partial-least squares-discriminant analysis (OPLS-DA). DART-TOF-MS can ionize various small organic molecules in living tissues and is an efficient alternative analytical tool for acquiring full chemical fingerprints from living tissues without requiring sample preparation. DART-MS measurement of skin tissue with multivariate analysis proved to be a powerful method to discriminate between experimental groups and to find biomarkers for various experiment models in skin dermatological research.

• 패션비즈니스
• /
• 제15권1호
• /
• pp.63-79
• /
• 2011

This study examines the relationship between breast shape and brassiere construction through the comparative analysis of brassiere pattern on the breast shape. This researcher drew the brassiere pattern of developing a pre-study for Chinese female adults according to average size based on the four breast shapes. And then we measures brassiere pattern size and comparatively analyzes breast between size and shape. Comparative analysis results of brassiere patterns are verified differences of size and shape on the breast shape. Above all an angle of cup dart showed remarkable differences on the breast shape. An angle of cup dart isn't proportioned to breast size. An angle of cup dart for cone shape is bigger than dome shape. Because cone shape breast is protruded center part but dome shape breast have a shape of smooth curve like a half globe. So an angle of a cone shape breast cup dart is determined bigger than dome shape breast. For increasing the uplift effect of brassiere, brassiere pattern is different on the breast shape. And a brassiere pattern need different drawing methods about the angle of cup dart, breast inner side diameter, slope and so on. This study has an important significance that it established a mechanical relationship of breast shape and brassiere pattern.

• 한국음향학회지
• /
• 제18권4호
• /
• pp.53-59
• /
• 1999

본 연구에서는 SPUDT 중에서도 현재 가장 일반적으로 사용되면서 동시에 좋은 성능을 가지는 DART와 EWC/SPUDT형 SAW 필터에 대해서 그 효용성을 Smith 등가회로 해석법을 이용하여 분석하였고, apodization weighting을 하였을 때 각각 어떠한 차이를 보이는지를 정량적으로 평가하였다. 그리고 단순히 apodization weighting된 SAW 필터에 SPUDT를 적용하였을 때 생기는 특성열화를 보상하기 위한 방법으로 이 두 종류의 SPUDT에 대해서 폭이 넓은 전극(wide electrode)에 대한 weighting을 독립적으로 행하였다. 그리고 전극두께 및 전극개수에 따른 SPUDT의 성능변화를 DART 및 EWC/SPUDT형 SAW 필터에 대하여 비교하여 분석하였다. 본 연구의 결과는 특정 형태의 SAW 필터에 SPUDT를 적용하는 문제에 있어서 적절한 SPUDT의 타입을 결정하는데 도움을 주리라 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.580-585
• /
• 2005

A QRT(Quad-Rotor Type) hovering robot system is developed for quick detection and observation of the circumstances under calamity environment such as indoor fire spots. The UAV(Unmanned Aerial Vehicle) is equipped with four propellers driven by each electric motor, an embedded controller using a DSP, INS(Inertial Navigation System) using 3-axis rate gyros, a CCD camera with wireless communication transmitter for observation, and an ultrasonic range sensor for height control. The developed hovering robot shows stable flying performances under the adoption of RIC(Robust Internal-loop Compensator) based disturbance compensation and the vision based localization method. The UAV can also avoid obstacles using eight IR and four ultrasonic range sensors. The VTOL(Vertical Take-Off and Landing) flying object flies into indoor fire spots and sends the images captured by the CCD camera to the operator. This kind of small-sized UAV can be widely used in various calamity observation fields without danger of human beings under harmful environment.

• Natural Product Sciences
• /
• 제17권3호
• /
• pp.202-205
• /
• 2011

The Angelica root has been used as a medicinal herb in many Asian countries including Korea, China, and Japan. Angelica gigas, A. sinensis, and A. acutiloba have been considered as Angelicae radix in Korean, Chinese, and Japanese Pharmacopoeia, respectively. Since the origins of Angelicae radix differ from country to country, there is a need to develop an efficient analytical method to identify the origin of the Angelica root. In order to obtain chemical fingerprints, three different Angelicae Radices were analyzed by direct analysis in real time mass spectrometry (DART-MS). Significantly different DART-MS spectra were observed from three different species of Angelicae Radix. Strong peaks of decursin or decusinol angelate, and its dimer were exclusively found from A. gigas. Ligustilide and linoleic acid were detected as the major component from A. acutiloba. The strongest ligustilide peak was observed from A. sinensis. DART-MS fingerprinting is a promising method for the rapid identification and/or quality control of Angelicae Radix.

• 신경치료
• /
• 제22권3호
• /
• pp.25-29
• /
• 2018

Purpose In this study, 45 students were divided into task - oriented group, task - oriented intermittent group, and continuous group, and the effect of each variable on learning was changed to angle of the arms' we checked. Methods This study was conducted for 45 days from March 13 to 18, 2017 for five days in the 20 generals living in Changwon city. Dart and goniometer were used for the measurement. In the exercise program, darts were placed on a smooth, hard surface of 1.5M height and the distance to the subject was set 1.5m away. In the dart throw practice, all three groups were marked with an elbow flexion $30^{\circ}$ on the wall, and the subjects were instructed to throw the dart at that point. Results Comparisons between groups showed significant differences between the continuous task-oriented training group and the intermittent task-oriented training group and the control group at the end of training (*** P <0.001). Conclusion This study showed that the intermittent task-oriented training method showed the highest effect (*** P <0.001), which proved that the intermittent method is the most effective exercise method among the three groups.