• Journal of Trauma and Injury
• /
• v.36 no.4
• /
• pp.421-424
• /
• 2023

This case report presents the case of a 49-year-old man who presented to our level I trauma center after sustaining injuries in an altercation with local law enforcement in which he was shot with a less lethal bean bag and tased. In a primary survey, a penetrating left supraclavicular wound was noted in addition to a taser dart lodged in his flank. No other traumatic findings were noted in a secondary survey. Given hemodynamic stability, completion imaging was obtained, revealing a foreign body in the left lung, a left open clavicle fracture, a C5 tubercle fracture, a possible grade I left vertebral injury, and a left first rib fracture. Soft tissue gas was seen around the left subclavian and axillary arteries, although no definitive arterial injury was identified. The bean bag projectile was embedded in the parenchyma of the left lung on cross-sectional imaging. The patient underwent thoracotomy for removal of the projectile and hemostasis. A thoracotomy was chosen as the operative approach due to concerns about significant bleeding upon foreign body removal. A chest tube was placed and subsequently removed on postoperative day 5. The patient was discharged on postoperative day 7. At a 2-week outpatient follow-up visit, the patient was doing well. This case report is the first to describe this outcome for a drag-stabilized bean bag. Although law enforcement officers utilize bean bag projectiles as a "less lethal" means of crowd control and protection, these ballistics pose significant risk and can result in serious injury.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.247-264
• /
• 1993

This study deals with the manufacturing of the foundation garments for the well-balanced somatotype of the Korean middle-aged womenhood. In order to get hold of the different somatotypes, a survey of a total of 134 middle-aged women in Kwangju area, ranging in their age from 45 through 59 was made. The statistical methods used for the analysis of the basic data were the Pearson's correlation coefficient, Anova, Cluster analysis and Stepwise. Emphasis of the try-on test was placed on (1) the comparison of anthropometric data before and after trying on the foundation garments, (2) sensory evaluation, (3) a rating on fit and performance, (4) the comparison by means of photograph. The conclusions obtained are as follows : 1) The 134 women sampled and measured were classified into the five groups of somatotype : the 52 women (34%) belong to Cluster 1 ; the 22 women(14.5%) belong in Cluster 2 ; the 12 women(7.9%) belong in Cluster 3 ; the 15 women(9.9%) belong in Cluster 4 ; the 33 women(27.7%) belong to Cluster 5. 2) As for the characteristics of the foundation garment design, the V-shaped neckline and chest dart was used. The adjust point is right above the perineum point. The foundation garment length is as far as trochanteric point. The materials used are cotton/polyurethane, lace, 100%cotton. The materials used for corrections were the sponge pad for the chest, and non-woven fabric pad for the back, shoulder and the hip. 3) The comparison of the anthropometric data of the subject when dressed in foundation garments showed a significant difference in bust point height, in bust point length and in nipple-ta-nipple breadth, which proves the foundation garments to be effective in correcting such part as the chest, the hip and the abdomen. 4) As considered in terms of the sensory evaluation, the item except for the shoulder and the armhole coincided with each other in the mean value and in the composite reliability coefficient, which also proves the foundation garments to be effective. 5) Subjects were satisfactory on fit, performance, design, of the foundation garment, and their changed appearance. 6) In the case of the comparison through the photographs, the silhouettes of all the five women subjects were found effectively to be balanced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1582-1594
• /
• 2005

The purpose of this study is to rediscover the value of form in fashion design by developing a new perspective of design appreciation. By examining and modifying the theories of Wolfflin and Belong, this paper tries to of for a new perspective for analyzing the characteristics of form in fashion designers' works. The three new perspective, Flat & Rounded, Closed & Opened and Part & Whole, can be used to analyze the formative aesthetic character of Vionnet's and Dior's works. Ten of Vionnet's and eleven of Dior's representative works selected and applied Delong's visual priority diagram to analyze their character. Vionnet and Dior, emphasized form and construction in their design and applied geometric shapes in their works. The main differences between Vionnet and Dior is that Vionnet's work transforms from geometric shapes in 2-dimentional space to drapery shapes in 3-dimensional space, Dior's work displays geometric shapes in 3-dimensional space. Vionnet created new formative art through the relationship between the clothes and human body. Vionnet's work has distinctively different qualities depending on whether the space is 2-dimensional or 3-dimensional showing transposition of form. In 2-dimensional space, Vionnet's works consist of triangles, rectangles and circles which are 'flat' and 'closed' in quality. These transform to solid forms by draping bias fabrics, which have a 'rounded' and 'open' quality. Dior tended to show artificial form rather than the natural lines of the body which is very different with Vionnet. Dior created clothes by using solid geometric form such as spheres, prisms, cylinders, pyramids and cubes in 3-dimensional space, which were visualized through constructive technique such as dart manipulation, boning, gathering, tucking, pleating, shirring and layering. Dior's works have their own form which does not relate with body shape. So his Works have a 'rounded' and 'closed' quality.

• Korean Journal of Human Ecology
• /
• v.18 no.1
• /
• pp.157-166
• /
• 2009

This study was conducted to evaluate the differences in external appearances and functional qualities between the slacks which were patterned on existing designs and on a new design in order to improve on their level of comfort of ready-made clothes for abdominally fat women. Five abdominally fat women in their 60's were chosen as experimental participants. Twenty-four external evaluation items, and seven different actions involving six moving parts of the body were investigated with a 5-level scale in the repeated wearing test. The results were analyzed by statistical methods. The newly designed pattern in this study was definitely superior to the other two patterns(L-type and K-type) on the external appearance evaluation. The newly pattern removed a waist belt and a dart from the front part of the garment and gave surplus space around the waist. It prevented superfluous wrinkles at the abdominal region and thighs. The superfluous wrinkles at the side regions also disappeared due to the length (inseam) reduction from waist to crotch. The newly pattern made the center-line of the back side slightly sloped to the main pattern in order to remove the drooped line. The newly pattern showed the highest score in the functional test of several actions. It was due to the reduction of the length from waist to crotch as well as the belt width. It made waist-line movement better, and made it easier and more comfortable to sit down. The newly pattern also showed the highest score in the functional test classified by specific movements of parts of the body for the same purpose. The slacks which were made of elastic materials showed better results than the non-elastic ones on external appearances and functional test items. It showed that the elastic materials played a better role in the increase of functional action of abdominally fat, aged women. This study suggests that the newly designed slacks pattern could give abdominally fat, aged women better external features and a more comfortable fitting sensation. As well, the results were significant as basic data to produce ready-made and/or tailer-made garments.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.827-830
• /
• 2006

The tsunami from the megathrust earthquake magnitude 9.3 on 26 December 2004 is the largest tsunami the world has known in over forty years. This tsunami destructively attacked 13 countries around Indian Ocean with at least 230,000 fatalities, displaced people 2,089,883 and 1.5 million people who lost their livelihoods. The ratio of women and children killed to men is 3 to 1. The total damage costs US$ 10.73 billion and rebuilding costs US$ 10.375 billion. The tsunami's death toll could have been drastically reduced, if the warning was disseminated quickly and effectively to the coastal dwellers along the Indian Ocean rim. With a warning system in Indian Ocean similar to that operating in the Pacific Ocean since 1965, it would have been possible to warn, evacuate and save countless lives. The best tribute we can pay to all who perished or suffered in this disaster is to heed its powerful lessons. UNESCO/IOC have put their tremendous effort on better disaster preparedness, functional early warning systems and realistic arrangements to cope with tsunami disaster. They organized ICG/IOTWS (Indian Ocean Tsunami Warning System) and the third of this meeting is held in Bali, Indonesia during $31^{st}$ July to $4^{th}$ August 2006. A US$ 53 million interim warning system using tidal gauges and undersea sensors is nearing completion in the Indian Ocean with the assistance from IOC. The tsunami warning depends strictly on an early detection of a tsunami (wave) perturbation in the ocean itself. It does not and cannot depend on seismological information alone. In the case of 26 December 2004 tsunami when the NOAA/PMEL DART (Deep-ocean Assessment and Reporting of Tsunami) system has not been deployed, the initialized input of sea surface perturbation for the MOST (Method Of Splitting Tsunami) model was from the tsunamigenic-earthquake source model. It is the first time that the satellite altimeters can detect the signal of tsunami wave in the Bay of Bengal and was used to validate the output from the MOST model in the deep ocean. In the case of Thailand, the inundation part of the MOST model was run from Sumatra 2004 for inundation mapping purposes. The medium and high resolution satellite data were used to assess the degree of the damage from Indian Ocean tsunami of 2004 with NDVI classification at 6 provinces on the Andaman seacoast of Thailand. With the tide-gauge station data, run-up surveys, bathymetry and coastal topography data and land-use classification from satellite imageries, we can use these information for coastal zone management on evacuation plan and construction code.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.23-33
• /
• 1996

This study was performed to induce a quality improvement and standardization of materials used for greenhouse. For this purpose, physical and mechanical properties of agricultural films for greenhouse were measured by kinds and thickness of the films. The properties are composed of impact, tensile, tear propagation strength and light transmittance. The results were summarized as follows. 1. At the impact test result of the falling dart, the thicker the film, the greater the impact strength of soft film. The impact weight at 50 percents is from 158g to 213g and the strength of low density polyethylene(LDPE) film is higher than the rest of any other films. 2. Seeing the leveling of the impact rupture, maximum impact weight which was ruptured very little ranges from 62g to 192g. The impact strength of 0.1mm films was higher than that of 0.05mm as from 1.8 to 3.2 times. 3. Tensile weight covers from 0.95kg to 2.22kg in the test materials, and the weight of lengthwise film is larger than that of width. LDPE film has high value of tensile weight. Elongation range is from 345 to 102 percent and lengthwise elongation is greater than width as much as from 1.4 to 2.7 times. 4. Tea. propagation strength ranges from 80.5kg/cm to 121.7kg/cm, and unlike which of LDPE film has high value, EVA film has low value in the films tested. The width strength is higher than the lengthwise. 5. The light transmittance of the soft film is about 78-92 percent in the range of ultraviolet ray, but has high value in the visible ray range.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Journal of Fashion Business
• /
• v.11 no.6
• /
• pp.101-114
• /
• 2007

This research aimed to identify the differences, in terms of the pattern, of using wool and jersey for designing jackets and to provide a theorized solution. The object of this study is development of women's tailored jacket pattern by the traits of fabrics with fabrics those are generally used to develop the power of manufacturing technique about fit of jacket. Basic bodies prototype, graphics of sleeves prototype and graphics of jacket pattern those a clothing company at present(on&on, a brand of Beaucre Merchandising Co.,Ltd) is using were used as basics of tailored jacket pattern. Three kinds of fabric(wool, polyester, jersey) were chosen, we made jackets in the same manufacturing process of the clothing company, modified and made up for the weak points and then we compared and analyzed differences of pattern by the traits of fabrics, the results are as follows: 1) We drafted basic tailored style jacket pattern, made a jacket with wool fabric, made wearing experiment, modified and made up for the weak points by the trend, then developed JacketⅠ for study; 2) With JacketⅠ for study as the basic, we made a jacket with polyester fabric, made wearing experiment, modified and made up for the weak points, then developed Jacket II for study; 3) With JacketⅠ for study as the basic, we made a jacket with jersey fabric, made wearing experiment, modified and made up for the weak points, then developed Jacket III for study; 4) We presented final degree of polymerization of pattern with Jacket I II III for study; 5) We compared and analyzed the differences of pattern with the degree of polymerization of pattern with Jacket I(Wool) for study and Jacket II(Polyester), there was no change of size overall except extra amount which happens because of the trait of the fabric in 20 items of body format pattern, there were differences of size in 3 items(height of a sleeve, width of a sleeve, length of a sleeve) among 5 items of sleeves pattern; 6) We compared and analyzed the differences of pattern with the degree of polymerization of pattern with Jacket I(Wool) for study and Jacket III(Jersey) for study, there were differences of size by the kinds of fabric in 11 items(neck point to shoulder point length, Bishoulder point length, back interscye length, front interscye length, armhole circumference, depth of armhole, chest circumference, bust circumference, waist circumference, hip circumference, waist dart) among 20 items of body format pattern, there were differences of size by the kinds of fabric in 5 items(height of a sleeve, circumference of a sleeve, width of a sleeve, length of a sleeve, width of bottom of a sleeve) among 5 items of sleeves pattern.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.139-146
• /
• 1999

The purpose of this study is to analyze the efficiency and working conditions of the patternwork departments by surveying the apparel manufacturing companies sampled in Seoul for their organization, working enviornment and technology of their patternwork departments, and thereby, find the ways to promote the functions of the patternwork department. The results of this study can be summarized as follows; 1. As a result of analyzing the working environment of patternwork departments, it was found that the problems counted by most of the pattern workers were lack of workforce, unhygienic or unpleasant workplaces. 2. As a consequence of analyzing the sample production in terms of tacking methods and times, They rarely tacked the white cotton. Such an omission of tacking procedure may serve to save time, but if a sewing error occurs, the working time would rather be longer due to the defects of pattern to be remedied. 3. As a result of reviewing the general patternwork conditions, it was found that the patterns were still worked out in two dimensions. On the other hand, more than 60% of the pattern workers were applying to their patternworks the styles which they had learned from their seniors. Few patterns are being developed in conformity to apparel trends or body shape changes. 4. As a consequence of examining the problems involving the production of patternsl, the problems involved primarily the patterns incised off no-dart pattern and body structure, and in light of items, involved mainly the trousers and in light of material, involved much the stretch or velvet. Moreover, it is deemed necessary to establish a special institute devoted to a systematic development of pattern technology. 5. Most of the CAD patternworks are used not for pattern designing but for grading and marking works, which suggests that pattern workers need to be educated on this new technology for more diverse and precise patternworks. 6. Lastly, as a result of examining the conditions of patternwork departments and their relevant works, most of the pattern workers were found to be subject to irregular and excessive workload, having little time to produce good patterns. This finding suggests that it is necessary to mandate the pattern workers to more involve the commodity planning.

• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.121-127
• /
• 2007

308 isolates of Ampelomyces sp. were isolated from powdery mildew fungi of 73 plant species in Korea for selection of biocontrol agents. An isolate 94013 isolated from powdery mildew fungus of red bean was selected as an effective biological control agent against cucumber powdery mildew in greenhouse. The morphological characteristics of the isolate is as follows. Pycnidia were sub-globose or elongated to pyriform, pale to dart brown, $52.5{\sim}82.5\;{\times}\;35.0{\sim}47.5\;(ave.\;62.5{\times}40.5){\mu}m$, and conidia were guttulate, straight cylindrical to fusiform, pale brown, $5.0{\sim}8.0\;{\times}\;2.5{\sim}4.3\;(ave.\;6.0{\times}3.0){\mu}m$. The isolate 94013 was identified as Ampelomyces quisqualis by morphological characteristics and rDNA ITS sequencing. The isolate A. quisqualis 94013 was different from that of the commercial product $AQ10^R$ in the rDNA ITS sequence.