• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.459-469
• /
• 1993

The purpose of this study is to investigate the relationship between body-types and skirt-patterns by analyzing various fitting conditions of the skirt patterns in relation to the body-types. To achieve this, fitting tests were done on six types of skirt-patterns. The tests included four body-types selected according to the existing classification of the types of under part of the body. Sensory tests were performed on the existing patterns and new drafting method based on the results of the fitting tests. The results of the fitting tests and sensory test are as follows. 1. The existing skirt-patterns were relatively well-fitted except for certain parts in standard somatotype (body-type A). 2. The new drafting method, designed on the basis of the fitting test on the existing patterns, scored high on all of the eighteen items included in the test This signifies the excellence of the new drafting method. 3. In the case of the allocation between the front and the back, which is the difference between the educational patterns and industrial patterns, the best silhouette was achieved when the hip-line and the waist-line were same sized both in the back and in the front. However, in the case of body-type D it was better when there was a 1cm difference between the back and the front. 4. The number of darts that best fits young persons were found to be eight, to keep their side hip-curve smooth. Further, it is desirable to set the center line of the dart as the vertical waist-line. 5. The best length of the darts were determined to be 12.5cm, 11ch in the back, and 11cm, 9.5cm in the front. Adjustments would be made according to the differing body-types in the range of 0.5cm. 6. The lowerness of the back waist-line for the normal was determined at 1.5cm, with some variations in other body-types. 7. The front waist-line was needed to be 1cm lowered in the case of body-type B, whereas, in the case of body-type D, it was needed to be 1cm raised.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.2
• /
• pp.21-33
• /
• 1981

The purpose of this study was to develop a skirt pattern drafting method for korean women between the ages of $18\~24$ on the basis of their physical charcteristics which differs from those of other races in its size and figure. The study procedures and results were as follows; 1. Ten types of convantional skirt patterns were collected and compared to determine the essential measuring items for skirt construction, and to discover what problems are involved. 2. Fourteen items of KIST measurement data were analysed for correlation coefficients, to establish representative items and independent ones. 3. Front waist length and back waist length were additionally measured for supplementary data. 4. A new skirt drafting method was developed based on the results of the pattern comparison and the data analysis. 5. A sensory evaluation was applied to evaluate the new method comparing it with the most widely accepted conventional pattern. An original rating scale was developed for the evaluation and an expert panel consisting of five members judged each shell from 12 subjects by random selection. According to a statistical analysis of the result of the 17 items on the rating scale, 14 items showed significant differences (${\alpha}\leqq$0.01 or ${\alpha}\leqq$0.05) between the two, with the new pattern having better fit. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the back hip, dart length, side seam balance, and the ease for daily activities.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.410-419
• /
• 2009

The purpose of this study was to develop the functionally improved winter work clothing for the Korean railroad workers. Based on the questionnaires, sample clothing for the Korean railroad workers was produced. The design, materials, and patterns were modified to increase mobility and comfort for workers. Water-repellent treatment was added to the material in order to decrease the dirt and stains while working. Also, reflective strips were added to side seams and hems of the trousers in order to increase the visibility and safety of the workers. In terms of the design and pattern, a circumference of 4.5cm was added to the crotch area in order to minimize tightness on the hip and crotch areas, but no additional circumference was added to the hip area. And a 1cm width dart was inserted between the side seams and yoke in order to add activity. Also three 1.4cm width tucks were used at 2.5cm space on the knees to alleviate tightness at the knees. The prototype was evaluated objectively and subjectively to compare with the existing working uniform. The assessment group consisted of 5 subject groups and 11 expert groups to evaluate external appearance and adaptability of the movements. Subject and panels were asked to evaluate the prototype that followed an ergonomic design and pattern. According to the results, the prototype was evaluated better than the existing working uniform in appearance and adaptability. A field test was conducted to compare the prototype and the existing working uniform. The field tests were performed by 6 workers in the Korean railroad. According to the results, the prototype advanced in terms of adaptability and comfort.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.1
• /
• pp.1-13
• /
• 2020

A study on estimation of the Levelized Cost of Energy (LCOE) was conducted for the Korean onshore wind farms. The LCOE was estimated on the basis of the actual wind farm data from Data Analysis, Retrieval Transfer system (DART) run by Financial Supervisory Service. Recently, social discount rate of Korea dropped from 5.5% to 4.5%, which was taken into account for this study. The onshore wind farms studied accounted for 42% of all the onshore wind farms of South Korea. Capital Expenditure (CapEx) and Operation Expenditure (OpEx) were calculated from the actual data, while Capacity Factors (CFs) were obtained from the wind farms of five provinces. Their distributions were estimated using Maximum Likelihood Estimation method, and then Monte Carlo Simulation (MCS) was performed for estimating LCOE, Levelized Fixed Cost (LFC), and Levelized Variable Cost (LVC). As a result, the LCOEs at the two discount rates, 4.5 and 5.5%, were 142 and 152 $/MWh, respectively, which were lower than that of financially viable onshore wind project of Korea. The 1% drop of social discount rate was estimated to result in a 10 $/MWh decrease in LCOE and a 4 $/MWh in LFC, which can be an advantage for wind project investors.

• The Research Journal of the Costume Culture
• /
• v.18 no.5
• /
• pp.892-907
• /
• 2010

The purpose of this study was to compare torso pattern made by draping and flat pattern method in terms of the size of breast. The size of this study was classified as 75A and 75D according to the size of breast. Each torso pattern by the combination of the size and pattern method was compared and analyzed. In order to test the fit of the draping and flat pattern that was developed according to the size of breast, the outer appearance was evaluated. The results of the study were as follows: First, The most striking size difference was difference between the front and the back on bust line level, which decides on position of the side seam in comparison of size between draping and flat pattern of 75A and 75D. In the flat pattern, the difference between the front and the back in the size of breast was consistent regardless of a change in the size of breast. However, in the draping, the bigger breast led to the bigger difference between the front and the back on bustline level. Second, the flat pattern in 75D was evaluated to be the worst in 27 items among total 46 items for the evaluation of outer appearance in the draping and flat pattern of 75A and 75D. Third, regardless of size, the draping was evaluated to be more suitable in the areas related to neck, arm hole, and waist dart than the flat pattern. These results are suggesting that the draping is a method of reflecting characteristic of the body type more accurately than the flat pattern, and that the draping is a more suitable method than the flat pattern for the design of clothing pattern of the body type with big breast like 75D.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.