• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.3
• /
• pp.335-343
• /
• 2014

An airbag is an important safety system and is well known as a safety system in cars during an accident. Airbag systems are also used as a shock absorber for UAVs to assist with rapid parachute landings. In this paper, the dynamics and gas dynamics of five airbag shapes, cylindrical, semi-cylindrical, cubic, and two truncated pyramids, were modelled and simulated under conditions of impact acceleration lower than $4m/s^2$ to avoid damage to the UAV. First, the responses of the present modelling were compared and validated against airbag test results under the same conditions. Second, for each airbag shape under the same conditions, the responses in terms of pressure, acceleration, and emerging velocity were investigated. Third, the performance of a pressure relief valve is compared with a fixed-area orifice implemented in the air bag. For each airbag shape under the same conditions, the optimum area of the fixed orifice was determined. By examining the response of pressure and acceleration of the airbag, the optimum shape of the airbag and the venting system is suggested.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.561-567
• /
• 2018

In this paper, we apply this method to the entire process of smart disaster safety management based on the $4^{th}$ industrial revolution to minimize human, social, economic and environment damage from accidents and disasters, prevention evaluation and disaster information collection analysis and real-time detection of field situation. Prevention of $5^{th}$ generation communication system by analysis, contrast by education and training using virtual reality and augmented reality disaster safety management decision support system intelligent robot for recovery, disaster, discovery, reconnaissance relief, and scale analysis of damages were proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.101-108
• /
• 2008

Residual stress is one of the causes which make defects in engineering components and materials. Many methods have been developing to measure the residual stress. Though these methods provide the information of the residual stress, they also have disadvantage like a little damage, time consumption, etc. In this paper, we devised a new experimental technique to measure residual stress in materials with a combination of laser speckle pattern interferometry and spot heating. The speckle pattern interferometer measures in-plane deformation during the heat provides for much localized stress relief. 3-D shape is used for determining heat temperature and other parameters. The residual stresses are determined by the amount of strain that is measured subsequent to the heat and cool-down of the region being interrogated. A simple model is presented to provide a description of the method. In this paper, we could experimentally confirm that residual stress can be measured by using laser interferometry and spot heating method.

• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.715-721
• /
• 2000

Residual stress is one of the causes which makes defects in engineering components and materials. These residual stresses can occur in many engineering structures and can sometimes lead to premature failures. There are commonly used methods by which residual stresses are currently measured. But these methods have a little damage and other problems; therefore, a new experimental technique has been devised to measure residual stress in materials with a combination of electronic laser interferometry, laser heating and finite element method. The electronic laser interferometer measures in-plane deformations while the laser heating and cooling provides for very localized stress relief. FEM is used for determining the heat temperature and other parameters. The residual stresses are determined by the amount of strain that is measured subsequent to the heat-up and cool-down of the region being interrogated. A simple model is presented to provide a description of the method. In this paper, the ambiguity problem for the fringe patterns has solved by a phase shifting method.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.611-618
• /
• 2008

The development of information society together with information telecommunication's influence on the human society is a ripple effect and getting wider. Among those ripple effects the disaster prevention is in the public eye in the present day. On the way to the ubiquitous society the main techniques to be concerned in ubiquitous sensor networks are the field of damage of storm and flood, safety facilities, traffic safety, industrial safety, energy safety, fire fighting, specific safety of radioactivity escape incident, environmental pollution, sea pollution, mountain and forrest disaster so on. In this paper the USN technique based on the disaster prevention communication technology service and its requirement technology and application are studied.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.204-210
• /
• 2000

The mandibular contour determines the shape of the lower part of the face and thus influences the appearance of the face. A patient with a large, squarish, or broad face who desires a small, round, or slender face can undergo mandibular contouring surgery to reduce the width of the lower face. The successful correction of a prominent mandibular angle by conventional angle ostectomy has been reported. But, in the majority of patients with a widened facial appearance, both the mandibular angle and part of the mandibular body anterior to it are protuberant laterally, so both must be resected. The purpose of this study is to introduce a new method of performing mandibular contouring surgery, more effectively and easily, and to reduce postoperative complication and evaluate its results. We treated 6 patients who has prominent mandibular angle using multiple step osteotomy with angle-splitting ostectomy. The advantages of this new method are as following. (1) easily performable (2) effective mandibular contouring surgery by reducing the width of lower face (3) producing a natural relief of the mandibular angle (4) low risk of soft tissue damage and complications (5) shortening of the operation time. etc.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.3
• /
• pp.273-276
• /
• 2009

A 54-year-old man experienced injury to the second finger of his left hand due to damage from a paintball gun shot 8 years prior, and the metacarpo-phalangeal joint was amputated. He gradually developed mechanical allodynia and burning pain, and there were trophic changes of the thenar muscle and he reported coldness on his left hand and forearm. A neuroma was found on the left second common digital nerve and was removed, but his symptoms continued despite various conservative treatments including a morphine infusion pump on his left arm. We therefore attempted median nerve stimulation to treat the chronic pain. The procedure was performed in two stages. The first procedure involved exposure of the median nerve on the mid-humerus level and placing of the electrode. The trial stimulation lasted for 7 days and the patient's symptoms improved. The second procedure involved implantation of a pulse generator on the left subclavian area. The mechanical allodynia and pain relief score, based on the visual analogue scale, decreased from 9 before surgery to 4 after surgery. The patient's activity improved markedly, but trophic changes and vasomotor symptom recovered only moderately. In conclusion, median nerve stimulation can improve chronic pain from complex regional pain syndrome type II.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.1
• /
• pp.1-15
• /
• 2016

Objective : For various reasons, Obesity & Rhinitis are constantly rising. So Interest of treatment has been expanding. We want to verify The Chungyeol (fire extinguishing) Lisup (Draining) effect of Bangpungtongsungsan on obese model of allergy rhinitis.Material and Methods : BALB/c mouse were divided four groups: control(CON), allergic induction(ARE), Bangpungtongsungsan extract administration(BTT), Bangpungtongsungsan double concentration extract administration (BT2T). Every group except control group were caused allergic rhinitis by Ovalbumin. BTT & BT2T were orally administered the Bangpungtongsungsan for 21days. Since then we observed the liver tissue cell and the nasal mucous membrane.Results : In comparison with ARE, experimental groups show relief of the nasal mucous membrane damage(secretion of mucus decrease, Itching decrease), Th2 eruption control(IL-4 decline), effect of anti-inflamatory(reducing TNF-α creation, decreasing of iNOS through NF-κB activation-inhibition). In addition, experimental groups show a loss in weight, diminished accumulation of fat. (decreasing within liver tissue, reducing TNF-α creation) BT2T is more effective to BTT.Conclusion : Bangpungtongsungsan treat obese model on allergy rhinitis thereby control fat augmentation, relieving inflammation.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2664-2669
• /
• 2008

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Nuclear Engineering and Technology
• /
• v.15 no.4
• /
• pp.219-228
• /
• 1983

The blowdown history of the TMI-2 accident up to the isolation of the relief valve associated with a small break LOCA is reviewed briefly. An analysis is made to determine what instruments should be added in the core in order to prevent core damage in the case of the TMI-2 accident. With the added instruments a procedure is presented on how to predict the uncovered level of the core and how to calculate operator time margin. Sample calculations are done for the TMI-2 accident to determine the uncovered level and operator time margin. Finally, the map to show the uncovered level of the core and operator time margin is drawn with measurable parameters by the above methods.