• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1490-1495
• /
• 2005

In this study, Model test of concrete frame structures with various shapes and locations are carried out by means of applying Peck's(1969) settlement method. The results of the model test indicated that important correlations existed between the behavior of frame structure and ground movement. Also, the damage level of frame structure closely influenced by the phase of excavation. Therefore, prediction of damage level at early phase of construction should be very precise. The damage level graph by Cording et al.(2001), the angular distortion provided gradually more serious damage to frame structures for the all cases. But the damage level graph by Burland(1997), was difficult to confirm because of very small amount of deflection ratio.

• Journal of the Society of Naval Architects of Korea
• /
• 제40권2호
• /
• pp.34-40
• /
• 2003

Ship damage due to maritime casualties lead to marine pollution, loss of life and properties. The maritime casualties come from the rough sea and bad weather condition generally. Therefore the large-scaled casualties will be derived from loss of structural strength and stability due to the progressive flooding and enlargement of damage by the effect of wave and wind. The improvement of damage survivability is very important in maritime safety This paper described the damage survivability assessment system which can be evaluate and improve the ship safety in consideration of loading, sea and damage condition. The components of the system and decision criteria for damage stability and structural safety is established. The ship modeler and behavior analysis program in wave is developed. Finally further research work is also discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.189.2-189.2
• /
• 2010

The purpose of this study is fatigue damage assessment for large sized casting parts (hub and mainframe) of the 3MW offshore wind turbine by computer simulation. Hub and mainframe durability assessment is necessary because wind turbine have to guarantee for 20 years. Fatigue life evaluation must be considered all of fatigue load conditions as the components are wind load transmission path. Palmgren-Miner linear damage accumulation hypothesis is applied for fatigue life estimation with stress-life approach. S-N curve for the spheroid graphite cast iron EN-GJS-400-18-LT is derived according to durability guidelines. Reduction factors were applied for survival probability, surface roughness, material quality and partial safety factor according to Germanischer Lloyd rules. To calculate fatigue damage, stress tensors, extracted from the unity load calculation from ANSYS is multiplied with time track of fatigue loads extracted from GH bladed. Damage accumulation is performed with all of fatigue load conditions at each finite element nodes. In this study maximum nodal damage value is under 1.0. casted parts are safe. This research was financially supported by the Ministry of Knowledge Economy(MKE), Korea Institute for Advancement of Technology(KIAT) and Honam Leading Industry Office through the Leading Industry Development for Economic Region.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.733-749
• /
• 2020

This study presents a computer vision-based approach for representing time evolution of structural damages leveraging a database of inspection images. Spatially incoherent but temporally sorted archival images captured by robotic cameras are exploited to represent the damage evolution over a long period of time. An access to a sequence of time-stamped inspection data recording the damage growth dynamics is premised to this end. Identification of a structural defect in the most recent inspection data set triggers an exhaustive search into the images collected during the previous inspections looking for correspondences based on spatial proximity. This is followed by a view synthesis from multiple candidate images resulting in a single reconstruction for each inspection round. Cracks on concrete surface are used as a case study to demonstrate the feasibility of this approach. Once the chronology is established, the damage severity is quantified at various levels of time scale documenting its progression through time. The proposed scheme enables the prediction of damage severity at a future point in time providing a scope for preemptive measures against imminent structural failure. On the whole, it is believed that the present study will immensely benefit the structural inspectors by introducing the time dimension into the autonomous condition assessment pipeline.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제23권6호
• /
• pp.329-339
• /
• 2019

The strategy for the management of earthquakes is shifting from post recovery to prevention; therefore, seismic performance management requires quantitative predictions of damage and the establishment of strategies for initial responses to earthquakes. Currently, seismic performance evaluation for seismic management in Korea consists of two stages: preliminary evaluation and detailed evaluation. Also, the priority of seismic performance management is determined in accordance with the preliminary evaluation. As a deterministic method, preliminary evaluation quantifies the physical condition and socio-economic importance of a facility by various predetermined indices, and the priority is decided by the relative value of the indices; however, with the deterministic method it is difficult to consider any uncertainty related to the return-year, epicenter, and propagation of seismic energy. Also this method cannot support tasks such as quantitative socio-economic damage and the provision of data for initial responses to earthquakes. Moreover, indirect damage is often greater than direct damage; therefore, a method to quantify damage is needed to enhance accuracy. In this paper, a Seismic Risk Assessment is used to quantify the cost of damage of road facilities in Pohang city and to support decision making.

• Journal of the Korean Society of Safety
• /
• 제38권2호
• /
• pp.36-43
• /
• 2023

In this study, a four-point bending test was conducted to assess and detect the damage to reinforced concrete structures using the acoustic emission (AE) technique. Based on the crack investigation results, flexural failure was classified into four stages and compared with the characteristic analysis results of AE parameters. The parametric characterization indicated that the activity of the primary AE signal was high in the early stage, and that of the second signal increased after the flexural cracks stabilized. Because the secondary AE signal included noise generated by friction, parameter-based analysis for damage assessment was performed using the primary signal; the secondary signal was used as complement. The activity analyses of the primary and secondary signals effectively classified crack propagation; however, determining the macrocracks and yielding of reinforcing bars had certain limitations. Nevertheless, applying the damage index with cumulative AE energy is a complementary technique for detecting and assessing structure damage that well detects the occurrence of macrocracks.

• Journal of the Korean Association of Geographic Information Studies
• /
• 제17권1호
• /
• pp.144-158
• /
• 2014

This research presented a conceptual design of damage assessment inventory for efficient response to natural disaster damage of infrastructure close to the river. It consists of classification and categorization of facilities for accomplishing the conceptual design of inventory for damage of infrastructure close to the river. However, there are arising problems of efficient management on disaster, such as poor management of data facilities and constructions which is managed by the different types of government departments. Therefore, this research presented conceptual models of damage assessment inventory on risks of damage infrastructure close to the river using the United states' HAZUS-MH to analyze damage facilities, type of asset classification, classification of domestic facilities and guidelines for computing the value of assets. Conceptual models of inventory this research presented is to be used on the data for damage response on protected inland damage assessment and to increase efficiency for evaluating detailed damage amount of private property by natural disaster and to establish a restoration plan.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 한국환경독성학회 2001년도 추계심포지움 및 학술발표회:환경오염의 생체지표를 이용한 위해성 평가의 최근 기법
• /
• pp.89-89
• /
• 2001

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제3권3호
• /
• pp.31-43
• /
• 2001

In this study, we carried out investigation and analysis on damages in tunnels on order to provide the basic information for the safety assessment of tunnels and to minimize the potential damage of the same kind as investigated. The frequencies of occurrence in terms of 4 items, i.e., service life interval, type of the damage, cause of the damage, and geological condition, were examined and summarized based on 44 foreign and domestic cases of tunnel damages. Also, we carried out a survey research of which the content included 28 questions on the tunnel safety assessment. The answers collected from domestic experts in tunneling suggested that the most probable cause of the tunnel damages was cracking in tunnels at 42~58%. They also suggested that the poor constrution work strongly caused the damages. Therefore, to ensure tunnel safety, high quality of constrution should be maintained as examined. The types of damage and their extent of influence on the overall tunnel safety are of practical importance to be used in the artficial intelligent system for tunnel safety assessment.

• Journal of Environmental Impact Assessment
• /
• 제20권2호
• /
• pp.141-150
• /
• 2011

The construction of photovoltaic complex in mountainous area is quickly increasing recently so that the environment assessment in constructing photovoltain complex in mountainous area was performed by comparison of $CO_{2{\cdot}}$ reduction and forest damage. The case studies for environmental value assessment, which construct photovoltaic complex in mountainous area, show that the losses of around 5.1billion won arise during 15 years. The government's official target for spreading photovoltaic energy until year 2030 can be satisfied when considering other alternative sites, improvement of technology and the alternative sites of an idle space of a building or a disused site, etc, except an undeveloped mountainous area. The construction of photovoltaic complex in mountainous area can cause the great damage to the environment, especially undeveloped mountainous area such as Baekdudaegan, and this defeat its own purpose of using photovoltaic energy. Therefore, the spread of photovoltaic complex through the additional damage of forest should be sublated.