• 제목/요약/키워드: Daily Operation

검색결과 623건 처리시간 0.033초

뇌하수체 제거술이 수행된 랫트의 혈액학 및 혈액화학적 소견 (Hematological and blood chemical findings in hypophysectomized rats)

  • 김남중;김명철
    • 대한수의학회지
    • /
    • 제45권1호
    • /
    • pp.121-125
    • /
    • 2005
  • The present study was carried out to produce the hematological and blood chemical findings after hypophysectomy in rats. Hypophysectomy was performed by the parapharyngeal method and the sham surgery was performed for the control group. Two weeks after the operation, the body weight of the hypophysectomized and control rats was measured daily for 5 days. We deleted the rats the weight gain of which is less than 5 g during 5 days from the hypophysectomy group. The successful operation rate was approximately 40%. In the hypophysectomized and control rats, their blood samples were collected from posterior vena cava after celiotomy under generally anesthesia with ether. Hematological parameters such as erythrocyte count, leukocyte count, hemoglobin concentration, hematocrit level, and platelet count were determined by Animal Blood Counter. The erythrocyte count, hemoglobin concentration, and hematocrit level were lower significantly (p<0.01), and the leukocyte count was lower significantly (p<0.05) in hypophysectomy group compared with control group. But the plate count did not show significant difference (p>0.05) between hypophysectomy group and control group. Also, blood chemical parameters such as glucose, blood urea nitrogen (BUN), aspartate animotransferase, albumin, total protein, cholesterol, calcium, and magnesium in serum were determined. Except BUN concentration, all parameters were not affected by hypophysectomy. But the BUN concentration was higher significantly (p<0.01) in hypophysectomy group compared with control group.

진공식(眞空式) 쓰레기 파이프라인수송(輸送) System 개발(開發) (The Development of the Waste Pneumatic Transportation System)

  • 박중현;김봉근;권봉기
    • 상하수도학회지
    • /
    • 제10권3호
    • /
    • pp.115-132
    • /
    • 1996
  • The present problems concerning the control of generation, storage, collection, transfer and transport, processing and disposal of the municipal waste are serious. And the transportation of the municipal waste is recently a important part of solid waste treatment and disposal. The waste pneumatic transportation system is expected to be an effective method for use in solving that problems. In this study, pneumatic transportation system was applied to 2,000-5,000 households of public/group housing for economic and technical analysis on the basis of data for working and operation. The proper equipment must be selected through economic and technical analysis for generation and properties of waste because the equipment in facilities of system is various. And the efficient operation method should be studied on the basis of information on the record of oeration. As the wet food waste clogs the pipeline, it is necessary to examine under the actual condition. The maximum unit waste generation rate based on the assumption that each household is comprised of 3.20 people is determined $2,340g/household{\cdot}day$, and it is included the 50% increase of seasonal and daily change.

  • PDF

터널 라이닝 내부에 설치한 열교환기의 현장모니터링 연구 (Study on long-term monitoring of heat exchanger installed in the tunnel lining)

  • 이철호;박문서;최항석;손병후;정재형
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.195.1-195.1
    • /
    • 2011
  • This paper presents an experimental study on a new potential geothermal energy source obtained from tunnel structures. An "energy textile", which is a textile-type ground heat exchanger, was fabricated between a shotcrete layer and a guided drainage geotextile in the tunnel lining system. To examine the long-term thermal behavior of the energy textile, the difference in temperatures of the inlet and outlet fluid circulating through the heat exchange pipe within the energy textile was monitored using a constant-temperature water bath. Daily heat exchange rate of the energy textile during cooling operation was estimated from the measured temperatures of the inlet and outlet fluid through the energy textile. The air and ground temperature was also continuously monitored. The operation of the energy textile as a ground heat exchanger was simulated using a 3D numerical CFD model (Fluent). The thermal conductivity of shotcrete and concrete lining components and temperature variation of air in the tunnel were incorporated in the model. The numerical analysis shows a good agreement with the long-term monitoring result.

  • PDF

구급출동지령서 개선을 통한 구급대원 현장 도착시간 단축방안 (Improvement Strategies of Arriving Time to the Scene by Enhancing EMTs' Recognition of Triage)

  • 오원신;정석환;윤명오
    • 대한안전경영과학회지
    • /
    • 제17권1호
    • /
    • pp.45-52
    • /
    • 2015
  • The purpose of this investigation is to enhance the survival rate of patients by transporting them to the hospital within the golden hour through the operational improvement of emergency dispatch instruction. To this end, problems and improvements of current operating system were derived by carrying out a survey against paramedics of Incheon city in 2012 and analyzing the current emergency dispatch instruction. This study analyzed the emergency activity daily reports for one year from January 1 through December 31, 2012 and researched the consciousness of 119 emergency medical technician. According to the analysis of the survey, there were no meaningful differences in the on-site arrival times per triage. Therefore, the item of 'Emergency Classification' specified in the emergency dispatch instruction needs to be integrated in the scheme of "triage". Also, the feedbacks of the emergency action log and the emergency dispatch instruction are necessary for 'duty for operation' to review the adequacy to the severity after the end of emergency operation. Finally, the improvement of the system for the continuous communication between the paramedics and the command staff is necessary. This improvements as stated above are expected to contribute to raise survival rate of patients.

화학플랜트 고온고압부 설계 효율화를 위한 일관시스템 구축 (Development of Integrated Design System for High Temperature, High Pressure Parts for Chemical Plants)

  • 정동관
    • 한국가스학회지
    • /
    • 제2권4호
    • /
    • pp.1-6
    • /
    • 1998
  • 중화학 플랜트의 고온고압 요소인 증기 발생기(steam generator)의 드럼, 헤더 및 헤더 스터브 설계에 응력해석에서 부터 도면자동작도, 제작용 서류 자동생성에 이르기까지의 제반설계과정을 체계적으로 연결시킨 설계정보 통합 관리로 단순 설계오류를 줄이고, 또한 설계변경에 대해 신속한 재설계가 가능한 효율적인 설계를 도모하기 위하여 "피로수명을 고려한 헤더스터브 형상설계 모듈", "TRD301을 기초로한 후육내압부 운전조건(기동/정지 조건) 및 수명평가 모듈", "헤더 및 드럼부 자동작도 모듈"을 개발하였다. 이에 따라 형상설계 모듈을 이용하여 설계된 스터브 형상을 토대로 수명평가 모듈로 수명을 평가한 후 상세설계 도면 및 관련 서류의 자동작도로 이어지는 일관된 종합설계 시스템을 구축하였다.

  • PDF

도시열환경개선을 위한 대구 클린 로드 시스템의 확대 운영방안에 관한 연구 (Managerial Plan of Extended Operation of the Clean-Road System for the Improvement of the Urban Thermal Environment in Daegu)

  • 정응호;노백호;김해동
    • 한국환경과학회지
    • /
    • 제25권11호
    • /
    • pp.1589-1595
    • /
    • 2016
  • From December 2014 to November 2015, an automatic weather system (AWS) was installed over a wide road of Daegu to continuously measure meteorological factors and surface temperature. We investigated the effective operating period of the clean-road system using the daily maximum and minimum air and asphalt surface temperatures, with the aim of creating an optimum thermal environment. The clean-road system was installed over a part of the broad way of Dalgubul(Dalgubul-Daero) by Daegu Metropolitan City in 2011. Until now, the clean-road system has been operated from the middle of April to the end of September. We assumed that it was desirable that the clean-road system could be operated when the discomfort index was above 55. In conformity with the conditions, we concluded that the optimum operation period of the clean-road system is from the end of March to about the middle of October.

Building Smart Microgrid Test-Bed를 이용한 전력사용량 패턴 최적화방안 연구 (A Study on the Optimization of Power Consumption Pattern using Building Smart Microgrid Test-Bed)

  • 이상우;강진규;이동하
    • 한국태양에너지학회 논문집
    • /
    • 제34권4호
    • /
    • pp.1-7
    • /
    • 2014
  • The microgrid system is the combination of photovoltaic(PV) array, load, and battery energy storage system. The control strategies were defined as multi-modes of operation, including rest operation without use of battery, power charging, and power discharging, which enables grid connected mode or islanded mode. Photovoltaic power is a problem of the uniformity of power quality because the power generated from solar light is very sensitive to variation of insolation and duration of sunshine. As a solution to the above problem, energy storage system(ESS) is considered generally. There fore, in this study, we did basic research activities about optimization method of the amount of energy used, using a smart microgrid test-bed constructed in building. First, we analyzed the daily, monthly and period energy pattern amount of power energy used, and analyzed PV power generation level which is built on the roof. Utilizing building energy pattern analysis data, we was studied an efficient method of employing the ESS about building power consumption pattern and PV generation.

우리나라 적합 하수도시설 및 관리방안 (Appropriate Sewerage Systems for Korea)

  • 이상은
    • 환경위생공학
    • /
    • 제7권2호
    • /
    • pp.37-52
    • /
    • 1992
  • Since the first sewage treatment plant was constructed in 1976, the sewerage systems of Korea have been rapidly expanded. As of the end of 1991, 22 sewage treatment plants with total capacity of 5.4 million tons/day are in operation which is equivalent of 3395 total daily sewage generation. Total extension of sewer 39.534 km in 1990 which is 55% of the target extension for the year 2001. However, the most sewage treatment plants employ activated sludge process which may not be suitable for medium and/or small scale plants. The poor existing sewer systems do not effectively collect and transport sewage to adversely affect the function of sewage treatment plant. To select the appropriate treatment system, the cities are classified into 3 categories such as large and medium size inland cities, small size cities and coastal cities. Considering the criteria suggested during this study, appropriate treatment processes were selected for each category. Conventional activated sludge process and step aeration process were found to be the most appropriate for big inland cities while biological nutrient removal processes should be considered for the cities discharge the effluent to lakes or reservoirs. RBC or Oxidation Ditch process might be appropriate for the medium size cities while several processes which do not require skilled operation and maintenance were suggested for the small cities. Ocean discharge after primary treatment can be considered for some east coast cities, Appropriate methodology to rehabilitate the existing sewers and strategy to convert combined sewer system to separate sewer system were proposed. This paper also include the appropriate management system for industrial wastewater, sludge and nightsoil.

  • PDF

손으로 전달된 관리기 진동의 분석과 방진대책 (Analysis and Isolation of Walking-type Cultivator Vibration Transmitted to Operator′s Hands)

  • 박영준;김경욱
    • Journal of Biosystems Engineering
    • /
    • 제27권4호
    • /
    • pp.273-282
    • /
    • 2002
  • This study was intended to measure and analyze hand-transmitted vibrations from cultivator in idle and operation modes for three different types of field works. Based on this analysis a time for the white finger syndrome to appear on 10% of the operators was estimated assuming that their daily exposure is 3 hours. The 4 methods to reduce the hand vibration were also proposed and compared with each other. The results of the study were summarized as follows : The highest vibration level was recorded during trenching operation, resulting in a total average vibration of 11.5 m/s$^2$. Followings were 7.6 m/s$^2$ during rotary tillage and 7.0 m/s$^2$ for weeding. When exposed to these levels of vibrations three hours a day, the white finger syndrome is likely to appear in 4 years for trenching, 6.2 years for rotary tillage and 6.8 years for weeding operations. Isolation of hand vibration performed by a rubber pad, anti-vibration gloves, a handle anti-vibration device and engine mounts were respectively 15.7%, 16.5%. 26.1% and 27.0%, resulting in most effective methods of the handle anti-vibration device and engine mounts. A better performance of about 33.9% was achieved when both the handle anti-vibration device and engine mounts were used.

분산전원의 영향과 정전비용을 고려한 신뢰도 향상 (Reliability Improvement Considering Effect of Dispersed Generator and Interruption Cost in Distribution Systems)

  • 김규호;송경빈
    • 조명전기설비학회논문지
    • /
    • 제20권10호
    • /
    • pp.172-177
    • /
    • 2006
  • 본 연구에서는 배전계통의 부하지점의 부하형태에 따른 정전비용의 영향을 고려하여 분산전원을 설치함으로써 운영비용 및 정전비용을 최소화하는 방안을 제안하였다. 가정용, 산업용, 상업용, 사무용 및 농업용 등 부하형태를 실제 계통과 유사하게 고려함으로써 정확한 신뢰도 지수와 운영비용을 구할 수 있고, 이를 통해 총 운영비용 최소화에 더욱 접근할 수 있다. 특히 정전시 각 부하지점에 설치된 분산전원에 의해 전력이 공급되어 전력구입 비용과 정전비용의 경우 효과적으로 감소됨을 알 수 있었으며, 정전빈도와 정전시간이 감소되어 전력 공급률이 향상되어 신뢰도 지수가 좋아졌음을 알 수 있었다.