• Tribology and Lubricants
• /
• v.14 no.2
• /
• pp.57-62
• /
• 1998

When lubricants is used under severe running conditions, their tribological characteristics are very important. We have studied the lubricating oil viscosity, kinds of additives and their amounts, and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. Moreover, the temperatures of three kinds of oils which have very different viscosities at room temperature, were varied between 6$0^{\circ}C$ and 115$^{\circ}C$ while the oil viscosity was unchanged. It was shown from the test results that surface wear is not greatly affected by the amount of ZnDTP (Zinc dialkyl dithio phosphate) antiwear agent, but EP (Extreme pressure) additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its temperature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the wider the scratching of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.131-142
• /
• 2009

In response to the need of developing children's wear design using traditional elements, this study purposed to develop fashion designs emphasizing contemporary images based on the symbolism and formativeness of traditional dresses. For this study, we reviewed the definitions and symbolism of traditional colors and traditional patterns using previous research, and classified them according to formative shape. In addition, this study made three pieces of dress and developed unique designs by applying the traditional patterns and elements of Korean traditional dress styles. The research methods were as follows. First, we examined the images of Korean traditional colors and classified the symbols and meanings of the colors. Second, we identified the types of patterns, and classified them into shapes and symbols. Third, we designed and made actual works by applying traditional patterns. Based on the theoretical studies as presented above, we developed contemporary casual hanbok designs for children by applying symbolic and formative traditional patterns and using DTP (digital textile printing).

• International Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.107-125
• /
• 2007

In human history, scarf has acted not only as a protection for body but also as a symbolization of class. Today, scarf has become a whole field in fashion and an important accessory to express individuality in fashion. Hence, like other fashion item, it is very important to develop exclusive design for scarf by analyzing the current fashion trend. In this research, we have designed a scarf textile, accordance with the contemporary design trend, applying the floral pattern, designed by William Morris who was an artist considered as the founder of the 1800s arts and crafts movement. We selected four trend themes, "Salon de Archives", "Eco Tech", "Profound Nature", and "Neo Aristo" for the design of 2007/2008 Fall/Winter. The flower motifs in Pimpernel Wallpaper, Honeysuckle textile design, Acanthus Wallpaper, Garden tulip wallpaper, Evenlode printed cotton, Trellis Wallpaper, and Chrysanthemum Wallpaper, by William Morris who expressed an image of environment friendly and nature reversion, applied to develop new creative scarf through design after modifying and rearranging these flower patterns. After the pattern was drawn by hand, adjusting of color and repeating of the design was done with DTP (Digital Textile Printing). Through this research, the researchers hopes to be of assistance to the development of national scarf brand design, and to the recapturing of textile industry that once played a important role in Koreans economic development.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.256-263
• /
• 2018

The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with $-41.90^{\circ}C$ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.77-87
• /
• 2019

To improve rubbing fastness of the printed fabrics, the binder polymers for Digital Textile Printing(DTP) pigment inks were synthesized with miniemulsion polymerization using various acrylic monomers, which are MMA(Methyl methacrylate), BA(Butyl acrylate), and Self-crosslinking monomers, such as NEA(N-Ethylol acrylamide) and MAA (Methacrylic acid). The acrylic monomer compositions were varied when synthesizing the binder polymers and their particle size distributions, average molecular weights, and Tgs were investigated. The prepared binder polymers were applied to prepare Cyan, Black, Yellow and Magenta pigment ink for DTP and the prepared inks were used to dye cotton fabrics. Then, color strength, and rubbing fastness were also investigated to study the effect of the comonomer compositions of the binder polymer on the color strength and rubbing fastness of the resulting pigment inks.

• Korean Journal of Ecology and Environment
• /
• v.37 no.1 s.106
• /
• pp.36-46
• /
• 2004

We evaluated the effect of limiting nutrients and N/P ratio on the growth of phytoplankton in a small eutrophic reservoir from November 2002 to December 2003. Nutrient limitation was investigated seasonally using nutrient enrichment bioassay (NEB). DIN/DTP and TN/TP ratio (by weight) of the reservoir during the study period ranged 17${\sim}$187 and 13${\sim}$60, respectively. Most of nitrogen in the reservoir account for $NO_3$-N, but sharp increase of ammonia was evident during the spring season. Seasonal variation of dissolved inorganic phosphorus concentration was relatively small. DTP ranged 26.5${\sim}$10.1 ${\mu}g\;P\;L^{-1}$, and the highest and lowest concentration was observed in August and December, respectively. Chlorophyll a concentration ranged 28.8${\sim}$109.7 ${\mu}g\;L^{-1}$, and its temporal variation was similar to that of cell density of phytoplankton. Dominant phytoplankton species were Bacillariphyceae (Melosira varians) and Chlorophyceae (Dictyosphaerium puchellum) in Spring (March${\sim}$April). Cyanophyceae, such as Osillatoria spp., Microcystis spp., Aphanizomenon sp. dominated from May to the freezing time. TN/TP ratio ranged from 46 to 13 (Avg. 27${\pm}$6) from June to December when cyanobacteria (Microcystis spp.) dominated. p limitation for algal growth measured in all NEB experiments (17cases), while N limitation occurred in 8 out of 17 cases. The growth rates of phytoplankton slightly increased with decreasing of DIN/DTP ratio. Evident increase was observed in the N/P ratio of > 30, and it was sustained with DTP increase until 50 ${\mu}g\;P\;L^{-1}$. Under the same N/P mass ratio with the different N concentrations (0.07, 0.7and 3.5 mg N $L^{-1}$), Microcystis spp. showed the highest growth rate in the N/P ratio of< 1 with nitrogen concentration of 3.5 mg N $L^{-1}$). The responses of phytoplankton growth to phosphate addition were clearly greater with increase of N concentration. These results indicate that the higher nitrogen concentration in the water likely induce the stronger P-limitation on the phytoplankton growth, while nitrogen deficiency is not likely the case of nutrient limitation.

• Communications of Mathematical Education
• /
• v.19 no.4 s.24
• /
• pp.823-837
• /
• 2005

[ $T_EX$ ] is a typesetting system created by Donald E. Knuth for producing publication-quality scientific books and journals. It is famous for the line breaking algorithm, the formatting of complex mathematical formula, and the powerful macro programming capability. Recently $T_EX$ plays a new role of an automatic typesetting engine. The paper describes $T_EX$ in the framework of typography by comparing with DTP softwares and word processors.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.57-68
• /
• 1994

In the last decade, digital image processing technics have been rapidly developed according to the advancement of electronic technique, and total scanner and DTP system were developed. Specially, there is need to retouch the color and image on the CRT. In this paper, we described a method to display surface color of printing on the CRT, and an algorithm to simulate the color reproduction by offset printing. The experimental results show that the described method and algorithm are useful and valid on the computer simulation of the multi-color printing adapted process ink characteristics.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.15-24
• /
• 1997

In DTP systems, satisfactory matching the appearance of displayed image on CRT and that of a reproduced binary image is very important. Most halftoning techniques assume that the printed color dots are square. However, most printers produce roughly circular dots. Thus, there is overlap between adjacent dots, and dots accupy adjcent space that should be empty space. These results are because the significant image distortion on the reproduced images. In this paper, we proposed a new tone correction digital halftoning method based on equi-visual perception characteristic.