• 산업기술연구
• /
• 제23권A호
• /
• pp.55-61
• /
• 2003

In this study, a signal processing and related techniques for development of a weight measuring system using a digital loadcell which is able to satisfy the important properties of WIM (weighing-in-motion) system have been investigated. A fast and high accurate signal processing of the digital load cell sensor for weighing-in-motion system is presented. A/D conversion system is constructed to realize a stable A/D conversion and signal processing algorithm using DSP and microprocessor. A new technique for vibration and measuring speed of the system is also investigated. The proposed method was applied to the actual design and the experimental results showed good performance of the weighing speed and stability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.334-336
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current- Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.89-95
• /
• 2009

태양광발전시스템에서 태양전지의 최대전력점 추적(MPPT, Maximum Power Point Tracking)은 중요한 부분이다. MPPT 알고리즘은 태양전지가 주어진 일사량 및 온도에 의해 최대전력점에서 동작할 수 있도록 전압($V_{MPP}$), 전류($I_{MPP}$)를 찾는다. 기존의 P&O, IncCond 알고리즘은 듀티를 증가 혹은 감소시키기 위하여 마이크로 프로세서나 DSP를 필요로 한다. 본 논문에서는 간단하면서 빠른 아날로그 MPPT 알고리즘을 제안한다. 이 방식은 기존 방식과 비교해서 매우 빠르게 MPP를 추적할 수 있으며 구현하기 쉽다. 또한 급격히 변하는 일사량에 기존 방식보다 대처가 빠르며 높은 효율을 보여준다.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.27-33
• /
• 1984

본 논문은 TDM 전자교환기의 국간신호 장비인 CCITT R2-MF 수신기(32CH용)의 디지탈 하드웨어 실현에 관한 실험적인 연구이다. MF 검출을 위한 DSP(digital signal Processing)방법은 여러 가지가 있지만 본 수신장치의 요구조건은 특정 주파수의 예민한 주파수 응답 특성과 그의 유무 판별이 필요하므로 DFT(discrete Fourier transform)에 의한 방법이 가장 효율적이다 이의 실현은 실 시간 처리를 위해 "bit-slice micro-processor"인 Am2900 series를 사용, micro-programming 기법을 도입하여 고속처리를 하였다. 그리고 전 시스템 제어를 위하여 Z-80A processor를 사용, 하드웨어 및 소프트웨어의 융통성을 최대한 높임으로서 TDM 전자교환기의 국간 신호장치로서의 활용 가능성을 확인하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.34-38
• /
• 1991

This paper describes and discusses the employment of EMG pattern analysis to provide upper-motor-neuron paraplegics with patient-responsive control of FES (functional electrical stimulation) for the purpose of walker-supported walking. The use of above - lesion EMG signals as a solution to the control problem is considered. The AR (autoregressive) parameters are identified by Kalman filter algorithm using DSP chip and classified by fuzzy theory. The control and stimuli part of the below-lesion are based on microprocessor(8031). The designed stimulator is a 4-channel version. The experiments described above have only attempted to discriminate between standing function and sit-down function. A further advantage of the this system is applied for motor rehabilitation of social readaption of paralyzed humans.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.6-12
• /
• 2006

A popular method used by primary protection for power transformer is current ratio differential relaying (RDR) with 2nd harmonic restraints. In modern power transformer due to the use of low-loss amorphous material, the 2nd harmonic component during inrush is significantly reduced. The higher the capacitance of the high voltage status and underground distribution, the more the differential current includes the 2nd harmonic component during internal fault. Thus the conventional method may not operate properly. This paper proposes an advanced relaying algorithm and the prototype IED hardware design and it's real-time experimental results. To evaluate performance of the proposed algorithm, the study is well constructed power system model including power transformer utilizing the EMTP software and the testing is made through simulation of various cases. The proposed relaying that is well constructed using DSP chip and microprocessor etc. has been developed and the prototype IED has been verified through on-line testing. The results show that an advanced relaying based prototype IED never mis-operated and correctly identified all the faults and that inrushes that are applied.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.328-334
• /
• 1999

A fish pump makes very important roles in an automation system of an aquaculture farm, thus it has been used widely in order to transfer fishes from one place to the other place automatically. In spite of its significant roles, the efforts for developing performance and promoting efficiency of the fish pump are not sufficient yet. In this paper, a method which makes the fish pump automation system is suggested. Automation of the fish pump can be accomplished by using variable voltage and variable frequency inverter system including induction motors. Especially, very simple logic to generate Pulse width Modulation(PWM) wave to control induction motor efficiently and three steps speed control method to regulate liquid quantity of the fish pump simply are suggested. Owing to the simplifies speed control and PWM wave generation technique, a cheaper microprocessor, 80C196KC, than a digital signal Processor(DSP) can be used to operate control algorithm in induction motor systems for real time control Also, a new idea of remote control for the simplifies novel inverter system by Programmable logic Controller(PLC) without special output unit, digital to analog converter(D/A), is suggested in this paper. Consequently the function of reliability, availability and serviceability of the fish pump system are developed. It will be expected to contribute expanding of application of the fish pump in aquaculture farms because the system can reduce energy consumption and some difficulties according to manual operation prominently.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.842-848
• /
• 2011

The current study proposes the design of a hybrid series-parallel resonant converter (SPRC) and a three-stage Cockcroft-Walton voltage multiplier for precisely adjusting the power generated by a continuous wave (CW) $CO_2$ laser. The design of a hybrid SPRC, called LCC resonant converter, is described, and the fundamental approximation of a high-voltage and high-frequency (HVHF) transformer with a resonant tank is discussed. The results of the current study show that the voltage drop and ripple of a three-stage Cockcroft-Walton voltage multiplier depend on frequency. The power generated by a CW $CO_2$ laser can be precisely adjusted by a variable-frequency controller using a DSP (TMS320F2812) microprocessor. The proposed LCC converter could be used to obtain a maximum laser output power of 23 W. Moreover, it could precisely adjust the laser output power within 4.3 to 23 W at an operating frequency range of 187.5 to 370 kHz. The maximum efficiency of the $CO_2$ laser system is approximately 16.5%, and the minimum ripple of output voltage is about 1.62%.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.292-297
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current-Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.691-697
• /
• 1999

This paper describes the implementation of a high speed image processing board. This image processing board is consist of a image acquisition part and a image processing part. The image acquistion part is digitizing the image input data from CIS and save it to the dual port RAM. By putting on the dual port memory between two parts, during acquistion of image, the image processing part can be effectively processing of large-volume image data. Most of all image preprocessing part are integrated in a large-scaled FPGA. We arwe using ADSP-2181 of the Analog Device Inc., LTD. for a image processing part, and using the available all memory of DSP for the large-volume image data. Especially, using of IDMA exchanges the data with the external microprocessor or the external PC, and can watch the result of image processing and acquired image. Finally, we show that an implemented image processing board used for the simulation of image retreval by the one of the typical application.