• 제목/요약/키워드: DSA system

검색결과 61건 처리시간 0.022초

DSA 전극을 사용한 에멀젼 함유폐수의 전해처리 (I) -회분식 전해처리- (Electrolytic Treatment of Emulsified Oily Wastewater Using DSA Electrode (I) - Batch Treatment -)

  • 김인수;송영채
    • 해양환경안전학회지
    • /
    • 제2권1호
    • /
    • pp.67-75
    • /
    • 1996
  • An innovative batch electrolytic system consisted of electrolytic basin, which was equipped with DSA(Dimensionally Stable Anode) type insoluble electrode, Ti/IrO2 anode and H-C metal cathode, and flotation separator was developed for the efficient treatment of shipboard emulsified oily wastewater. The electorod cleance and current density of elecrolytic basin to ensure maximum treatment efficiency of oily wastewater was evaluated as 6 mm, 3 A/dm3, respectively. The electrolytic efficiency of oily wastewater was affected by the operationtemperature, and it means that the temperature controller to ensure the stabiity of the process is required. The conductivity in the electrolytic basin was increased with the percentage of sea water in the oily wastewater, and over 90% of treatment efficiency of oily wastewater could be obtained at 7% of sea water. The oil removal rate was increased according to the increase of the quantity of electricity, and the maximum value of electrilyic rate constant was 288 mgoil/A.min. The information obtained from this study might be used for development of an efficient continuous electrolytic system treating the emulsified oily wastewater.

  • PDF

고역통과필터를 이용한 혈관조영상의 화질 개선 (Improvement of Angiogram Quality Using by High Pass Filter)

  • 박민주;이상복
    • 한국방사선학회논문지
    • /
    • 제8권6호
    • /
    • pp.301-307
    • /
    • 2014
  • 본 연구에서는 DSA 장치에 의하여 획득된 영상을 고역 통과 필터링 알고리즘을 구성하여 구성된 알고리즘으로 실험을 하여 혈관조영상의 화질을 개선하는 방안을 제안하였다. 고역 통과 필터(High Pass Filter)는 고주파 성분은 통과시키고 저주파 성분은 차단하는 필터이다. 의료영상에서 고주파 성분은 장기(organ)의 윤곽이나 경계선 부분이 고주파 성분에 해당된다. 따라서 고역 통과 필터는 경계선 검출에도 쓰이지만 고역 강조를 위해서도 이용된다. 제시한 알고리즘으로 분석을 하여 혈관조영상의 화질을 개선할 수 있었다. 목적부위의 표현이 확연하게 두드러짐을 알 수 있었다. 제안된 방안을 이용한다면 DSA 시스템의 화질을 개선하는 소프트웨어에 적용하여 오진을 줄여주고 시술의 정확도를 더욱 높여 줄 수 있을 것이라 사료된다.

해상무선통신환경에서 스펙트럼 공유와 우선순위를 적용한 동적스펙트럼할당 알고리즘 기술연구 (Dynamic Spectrum Allocation Algorithm for Maritime Communications using Spectrum Sharing and Priority)

  • 임무성;김경성;이연우;이성로
    • 한국통신학회논문지
    • /
    • 제35권7B호
    • /
    • pp.1001-1008
    • /
    • 2010
  • 본 논문에서는 해상무선통신환경에서 선박의 위치에 따라 속해있는 네크워크 운영자들 간의 장기간(long-term)의 우선순위(priority) 및 서비스 클래스간의 우선순위 등을 고려한 동적스펙트럼할당(DSA: Dynamic Spectrum Allocation) 알고리즘을 제안한다. 제안한 DSA 알고리즘은 네트워크 운영자간의 각기 다른 서비스 클래스의 트래픽 패턴에 대해서 동적으로 스펙트럼을 공유하고 할당하여, 기존의 고정 스펙트럼 할당방식에 비해 사용자들에게 요구하는 스펙트럼 대역폭을 충분히 제공할 수 있어 서비스 만족율을 향상시킴을 보였다. 따라서 제안한 알고리즘은 해상무선통신환경에서도 스펙트럼 공유와 동적 할당을 통한 운영이 가능함을 보여 육상의 유휴 스펙트럼 자원을 활용할 수 있음을 제시하였다.

DIFFUSIVE SHOCK ACCELERATION BY MULTIPLE WEAK SHOCKS

  • Kang, Hyesung
    • 천문학회지
    • /
    • 제54권3호
    • /
    • pp.103-112
    • /
    • 2021
  • The intracluster medium (ICM) is expected to experience on average about three passages of weak shocks with low sonic Mach numbers, M ≲ 3, during the formation of galaxy clusters. Both protons and electrons could be accelerated to become high energy cosmic rays (CRs) at such ICM shocks via diffusive shock acceleration (DSA). We examine the effects of DSA by multiple shocks on the spectrum of accelerated CRs by including in situ injection/acceleration at each shock, followed by repeated re-acceleration at successive shocks in the test-particle regime. For simplicity, the accelerated particles are assumed to undergo adiabatic decompression without energy loss and escape from the system, before they encounter subsequent shocks. We show that in general the CR spectrum is flattened by multiple shock passages, compared to a single episode of DSA, and that the acceleration efficiency increases with successive shock passages. However, the decompression due to the expansion of shocks into the cluster outskirts may reduce the amplification and flattening of the CR spectrum by multiple shock passages. The final CR spectrum behind the last shock is determined by the accumulated effects of repeated re-acceleration by all previous shocks, but it is relatively insensitive to the ordering of the shock Mach numbers. Thus multiple passages of shocks may cause the slope of the CR spectrum to deviate from the canonical DSA power-law slope of the current shock.

2채널 뇌기능 감시 시스템을 위한 뇌파 소프트웨어의 개발 (Development of an EEG Software for Two-Channel Cerebral Function Monitoring System)

  • 김동준;유선국;김선호
    • 대한의용생체공학회:의공학회지
    • /
    • 제20권1호
    • /
    • pp.81-90
    • /
    • 1999
  • 본 연구에서는 수술이나 환자 모니터링시 무의식 상태 환자의 뇌혈류량에 대한 정확한 모니터링으로 뇌허혈 현상을 방지하기 위하여 2채널 양극성 아날로그 EEG를 디지털로 처리하여 다양한 뇌파 관련 파라미터를 추출하여 실시간으로 한 화면에 디스플레이하고, 또한 임상의사들이 사용하기 편리한 뇌파 감시 소프트웨어를 개발하고자 하였다. 이를 위하여 EEG-데이터를 FFT 연산 후 CSA 및 DSA의 형태로 표현하며, 기타 다양한 뇌파관련 파라미터를 추출한 후 한 화면에서 실시간으로 디스플레이하고, 사용 편리성도 극대화하도록 프로그램하였다. 프로그램은 개발 도중에 여러 번의 동물실험 및 임상실험을 통하여 개선 보완되었으며, EEG, CSA, DSA 및 알파비, 퍼센트 델타 스펙트럼 모서리 주파수, 전체 파워, 전체 파워의 차 등의 주요 뇌파 파라미터들을 한 화면에서 관찰하게 되어 환자 상태의 종합적인 간찰이 가능하며, 나중에 저장된 EEG 파일을 재검토할 수 있다. 또한 CSA, DSA, 스펙트럼 모서리 주파수 및 전체 파워는 원하는 부분에서 표본을 취해 화면 위쪽에 최대 3개까지 붙여 놓고 동시에 비교할 수 있으므로 환자 상태의 객관적인 비교가 가능하고, 환자상태, 응급처치 등에 대한 기록사항을 입력할 수 있어서 저장된 EEG 파일의 검토시 이들 event로 즉시 찾아가는 기능이 있으며, 그 외에도 앞 뒤 점프 이동 기능, 이득 조절 기능, 윈도우 환경에서의 파일관리 기능 등을 갖추고 있고, 프로그램이 윈도우 환경에서 개발되어 마우스에 의해 대부분의 동작이 이루어진다. 개발된 프로그램을 이용한 대학병원의 임상실험결과, 환자상태의 변화에 매우 민감하게 반응하고, 또한 임상의사들이 이용하기에도 매우 편리하다는 평가를 받았다.

  • PDF

열전도 문제에 대한 설계 민감도 해석과 위상 최적 설계 (Design Sensitivity Analysis and Topology Optimization of Heat Conduction Problems)

  • 김민근;조선호
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2004년도 봄 학술발표회 논문집
    • /
    • pp.127-134
    • /
    • 2004
  • In this paper, using an adjoint variable method, we develop a design sensitivity analysis (DSA) method applicable to heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume, respectively. Through several numerical examples, the developed DSA method is verified to yield very accurate sensitivity results compared with finite difference ones, requiring less than 0.3% of CPU time far the finite differencing. Also, the topology optimization yields physical meaningful results.

  • PDF

열전도 문제에 대한 3 차원 구조물의 위상 최적설계 (Topology Design Optimization of Three Dimensional Structures for Heat Conduction Problems)

  • 문세준;조선호
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.327-334
    • /
    • 2005
  • In this paper, using an adjoint variable method, we develop a design sensitivity analysis (DSA) method applicable to 3-Dimensional heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume, respectively, Through several numerical examples, the developed DSA method is verified to yield efficiency and accurate sensitivity results compared with finite difference ones. Also, the topology optimization yields physical meaningful results.

  • PDF

Topology Design Optimization of Heat Conduction Problems using Adjoint Sensitivity Analysis Method

  • Kim, Min-Geun;Kim, Jae-Hyun;Cho, Seon-Ho
    • 한국전산구조공학회논문집
    • /
    • 제23권6호
    • /
    • pp.683-691
    • /
    • 2010
  • In this paper, using an adjoint variable method, we develop a design sensitivity analysis(DSA) method applicable to heat conduction problems in steady state. Also, a topology design optimization method is developed using the developed DSA method. Design sensitivity expressions with respect to the thermal conductivity are derived. Since the already factorized system matrix is utilized to obtain the adjoint solution, the cost for the sensitivity computation is trivial. For the topology design optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of structures and allowable material volume respectively. Through several numerical examples, the developed DSA method is verified to yield very accurate sensitivity results compared with finite difference ones, requiring less than 0.25% of CPU time for the finite differencing. Also, the topology optimization yields physical meaningful results.

전기화학 계면반응에 기초한 DSA 전극을 사용한 고성능 폐수처리 시스템 (The wastewater treatment system with high performance based on electrochemical interface reaction using dimensionally stable anode with simple manufacturing)

  • 나영수;이만성;김경호
    • 접착 및 계면
    • /
    • 제19권3호
    • /
    • pp.101-105
    • /
    • 2018
  • 도시의 산업화와 인구의 빠른 증가로 인해, 지구상에서 여전히 7억 8천만명이 물자원 사용에 어려움을 격고 있으며, 이에 따라 깨끗하고 저렴한 물자원 확보 방안에 대한 관심이 집중되고 있다. 그러나, 현존하는 폐수처리 시스템은 낮은 공정효율, 높은 운영비용, 그리고 넓은 부지 요구 등의 다양한 이슈에 직면하여 있는 실정이다. 따라서, 저렴하고 효율적인 폐수 처리 시스템의 개발이 시급히 요구된다. 이러한 노력의 일환으로 rutile type $RuO_2$를 기반으로 한 DSA전극을 이용한 전기 화학적 방법에 기초한 폐수 처리 시스템을 제안하였고, 이를 성공적으로 시연하였다. 우리의 폐수 처리 시스템은 생활폐수의 경우, 생화학적 산소 요구량 (BOD), 화학적 산소 요구량 (COD) 및 총 유기탄소 (TOC) 제거 효율이 52.0 %, 77.8 % 및 65.6 % 로 우수한 특성을 보였다. 또한 축산 폐수의 경우, BOD, COD, 총 질소 (TN), 총 인 (TP)의 제거 효율이 각각 92.9 %, 75.6 %, 35.1 %, 100 %로 획기적인 감축 효과를 거두었습니다. 이 장치의 탁월한 제거 효율과 작은 크기를 고려할 때, rutile $RuO_2$로 코팅된 DSA를 사용한 전기화학적 폐수 처리는 생활 및 축산 폐수의 처리를 위한 유망한 방안이 될 수 있음을 제안하고자 합니다.

촉매성 산화물 전극 (DSA, Dimensionally Stable Anode)의 가속수명 테스트 방법과 장치에 관한 기초 연구 (A Basic Study on Accelerated Life Test Method and Device of DSA (Dimensionally Stable Anode) Electrode)

  • 김동석;박영식
    • 한국환경과학회지
    • /
    • 제27권6호
    • /
    • pp.467-475
    • /
    • 2018
  • The lifetime of the electrode is one of the most important factors on the stability of the electrode. Since the lifetime of the DSA (Dimensionally stable anode) electrode is long, an accelerated lifetime test is required to reduce the test time. Beacuse there is no basis or standard method for accelerated lifetime testing, many researchers use different methods. Therefore, there is a need for basis and methods for accelerated lifetime testing that other researchers can follow. We designed a reactor system for accelerated lifetime testing and planned specific methods. Reactor system was circulating batch reactor. Reactor volume and cooling water tank were 12.5 L and 100 L, respectively. Electrode size was $2cm{\times}3cm$ (real electrolysis area, $5cm^2$). In order to maintain the harsh conditions, accelerated lifetime test was carried out in a high current density ($0.6A/cm^2$) and low electrolyte concentration (NaCl, 0.068 mol/L). Maintaining a constant temperature was an important operation parameter for exact accelerated lifetime test. As the accelerated lifetime test progressed, the active component of electrode surface was consumed and desorption occurred. At the point of 5 V rise, corrosion of the surface of the base material(titanium) also started.