• Language and Information
• /
• v.6 no.2
• /
• pp.1-14
• /
• 2002

This paper discusses so called the non-DP subject constructions in English. In general, a subject is a DP that bears Nominative case and that occupies 〔Spec, IP〕. However, in some examples under investigation, it looks as if non-DP categories such as Prepositional Phrases(PP), Adjectival Phrases(AP), Adverbial Phrases (AdvP), Small Clauses (PreP or SC), and VP occupy the canonical subject position, 〔Spec, IP〕. Under the framework of Chomsky's (1993, 1995) along with his previous works (Chomsky 1981, 1986), the Case Checking mechanism undoubtedly assumes that only DPs can have Case Therefore, the Case Checking/Agree mechanism is stated such that the strong uninterpretable feature, in this case Case feature (D or NP) feature must be checked off in a certain manner. Therefore, any phrasal categories other than DPs are not included in the considerations. Nonetheless, there are many instances of non-DP categories in English that occupy the seemingly canonical subject position, 〔spec, IP〕. In this paper, it is proposed that the actual position of these non-DP subjects in English is not in Spec of IP. Rather, they occupy 〔Spec, TopP〕 under CP in the sense of Lasnik & Stowell (1991), Rizzi (1997), and Haegeman & Gueron (1999). In its effect, therefore, this paper extends the idea of Stowell (1981) who argues that the clausal subjects in English is not in 〔Spec, IP〕, but in 〔Spec, TopP〕. We further argue that Stowell's version of Case Resistance Principle must be extended in order to accomodate many more occurrences of so called non-DP subjects.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.97-104
• /
• 1995

This paper is a study on the recognition of continuous digits for the implementation of a voice dialing system, and proposes an method of speech recognition using syntactic analysis and One-Stage DP. In order to perform the speech recognition, first of all, we make DMS model by section division algorithm and let continuous digits data be recognized through the proposed One-Stage DP method using syntactic analysis. In this study, 7 continuous digits of 21 kinds which is pronounced by 8 male speakers two or three times, are used. The speaker dependent and speaker independent recognition are performed with the above data by way of the conventional One-Stage DP and the proposed One-Stage DP using syntactic analysis under the condition of laboratory environment. From the recognition experiments, it is shown that the proposed method was better than the established method. And, the recognition accuracy of speaker dependence and independence by the proposed One-Stage DP using syntactic analysis was about 91.7% and 89.7%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.29-37
• /
• 1989

This paper presents an application of the extended DP matching method to the on-line recognition of cursive Hangeul (Korean characters). We decrease the number of matching's objects by performing rough classification matching which makes the best use of features in the first and the last segment of Hangeul. By adding the extraction function of the basic character patterns to DP matching method, we try to calculate precisely the difference among Hangeul. The extraction of the basic character patterns is done by examining the features of segments in character. Applying the extended DP matching method to the on-line recognition of cursive Hangeul, absorption of writing motion and stable separation of strokes can be performed with flexibility.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.139-152
• /
• 2023

Despite efforts to apply 3D print (3DP) technology in the field of fashion and endless discussions about the possibility of future development, in reality, it is difficult to utilize 3DP technology in fashion for reasons related to material, technology, and cost constraints. The purpose of this study was to supplement the limitations of 3DP technology in order to promote its utilization in fashion and simultaneously find a solution to achieve aesthetic satisfaction in the design method. Specifically, through the development of fashion products with a 3DP polymer-fabric structure to which the parametric design methodology has been applied, this study explored the possibility of practical application and proposes a new 3DP fashion design method. The 3DP polymer-fabric developed as a result of the research was stably adhered to the fabric. Additionally, the study confirmed the possibility of making 3DP clothes that are amenable to the wearer's activities, as it was verified that cutting and sewing tailored to the human body's curvature and structure can be performed. The design process using the 3DP polymer-fabric presented in this study is meaningful in that it suggests a solution to complement the limitations of modern technology in connection with designers' creativity. Moreover, the design process presented in this study is expected to contribute to the commercialization and generalization of 3DP by providing practical help to allow fashion experts to utilize 3DP technology.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.58-58
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network system to real-time distributed control is gaining acceptance in many industries. In order to take advantages of the network technique. however, network implementation should be carefully designed to satisfy real-time constraints and to consider network delays. This paper presents the implementation of feedback control system in Profibus-DP. Profibus-DP is a type of fieldbus protocols that are specifically designed to interconnect simple devices with fast I/O data exchange. As feedback control in profibus-DP is implemented, Network delays is found with influence of system performance. We analyze network delays in Profibus-DP into 3 reasons - dead time in Profibus interface, protocol delay, delay by asynchronization. In order to compensate the network delays, we introduce control algorithms with time delay concept. The results show that network delay can be compensated.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.33-33
• /
• 2017

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.46-48
• /
• 1987

In the difference picture(DP) which is obtatined from two subsequent images we detect edge intersection points(EIP) and estimate the directions in which edges disappear at those points, Then we group the DP regions which the motion of the object makes and we extract the moving object.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.80-85
• /
• 1989

The structural properties of covered and naked barley starches and those components were investigated. ${\beta}-amylosis\;limit(%)$ of covered and naked barley starches were 58.6 and 56.3%, respectively and those of their amyloses and amylopectins were 87.0, 77.7, 57.6 and 52.0%, respectively. The ratios of outer chain length ${\overline{OCL}}$ and inner chain length${\overline{ICL}}$ for amylopectins of covered and naked barley were about 2.2:1 and 2.0:1, respectively. The elution curves by Sephadex G-75 after debranching starches with pullulanase were similar patterns for two starches and yielded two peaks consisting of amylose component${\overline{dp}}>55$ and bimodal amylopectin components of ${\overline{dp}_(35-45)$ and ${\overline{dp}}(10-20)$ hydrolysates. Also, hydrolysis products by sequential hydrolysis with pullulanase and ${\beta}-amylase$ contained 0.03-0.5% non-hydrolyzed peak components of ${\overline{dp}}>55$. The elution profiles of ${\beta}-amylase$ hydrolysates yielded two peaks consisting of the inner components${\overline{dp}}>55$ and the outer chain components of amylopectin${\overline{dp}}>10$ regardless of samples. However, ${\overline{dp}}$ distributions of ${\overline{dp}>55}$ hydrolysates exhibited the significant differences due to the varieties.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.196-201
• /
• 1992

Characteristics on lintnerization of dry type (Suwon 147) and moist type (Hwangmi) sweet potato starches were investigated. Chain distribution of lintnerized starches was also studied by debranching with pullulanase. Hydrolytic patterns of two starches showed two distinct stages and hydrolysis extents of Suwon 147 starch were lower than those of Hwangmi starch. The relative crystallinities of Suwon 147 starches were higher than those of Hwangmi starch. The elution profiles of lintnerized starches were composed of two peaks about degree of polymerization (DP) 25 and DP 15. The elution profiles of debranched samples showed only one peak about DP 15 and peak DP of Suwon 147 lintnerized starch was higher than that of Hwangmi.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.43-50
• /
• 2018

Recently, various efforts have been made to develop oil and gas in the Arctic Ocean. It is very important to consider the load caused by ice in designing floating structures in the area. The magnitude of the ice load and its impact on a structure should be considered. In this paper, we analyze ice parameters affecting the DP performance of FPSO with a DP-assisted mooring system. Several ice characteristics are selected, and the resulting ice load is calculated using GEM software. Numerous simulations are conducted while changing the values of the parameters, and DP capability plots are generated to visualize the effects of changing these parameters. It is shown that the ice drift speed and thickness are the major properties to be considered in DP system design. The limitations of the analysis and future work are discussed in the conclusion.