• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.39-47
• /
• 2014

Solar applications analysis and building energy performance depend on the quality of the solar resource data available. Unfortunately, most of the weather stations do not measure solar radiation data in Korea, as a reason many researchers have studied different solar radiation estimation models and suggested to apply them to various locations in Korea. In addition, they also studied the impact of hourly global solar radiation on energy performance of an office building by comparing the simulated building energy consumptions using four different weather files, one using measured, and three estimated solar radiation from different models, which are Cloud-cover Radiation Model (CRM), Zhang and Huang Model (ZHM), and Meteorological Radiation Model (MRM), and concluded that there was some impact on energy performance of the building due to the using different solar radiation models. However, the result cannot be applied to all other buildings since the simulated office building for that study only used limited building characteristics such as using fixed values of solar heat gain coefficient (SHGC) and window-to-wall ratio (WWR), which are significant parameters related to solar radiation that affect to the building energy consumptions. Therefore, there is a need to identify how the building energy consumption will be changed by varying these building parameters. In this study, the impact of one measured and three estimated global solar radiation on energy performance of the office building was conducted taking account of SHGC and WWR. As a result, it was identified that the impact of four different solar radiation data on energy performance of the office building was evident regardless SHGC and WWR changes, and concluded that the most suitable solar models was changed from the CRM/ZHM to the MRM as SHGC and WWR increases.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.135-140
• /
• 2012

Interior Permanent Magnet Synchronous motors (IPMSM) with concentrated winding are superior to distributed winding in the power density point of view. But it causes huge amount of eddy current losses on the permanent magnet. This paper presents the optimal permanent magnet V-shape on the rotor of an interior permanent magnet synchronous motor to reduce the core losses and improve the performance. Each eddy current loss on permanent magnet has been investigated in detail by using FEM (Finite Element Method) instead of equivalent magnetic circuit network method in order to consider saturation and non-linear magnetic property. Simulation-based design of experiment is also applied to avoid large number of analyses according to each design parameter and consider expected interactions among parameters. Consequently, the optimal design to reduce the core loss on the permanent magnet while maintaining or improving motor performance is proposed by an optimization algorithm using regression equation derived and lastly, it is verified by FEM.

• Korean Journal of Community Nutrition
• /
• v.7 no.2
• /
• pp.156-166
• /
• 2002

The object of this study was done to assert the dietary habits, food intake, and dietary attitudes of 332 middle school students in a small city. The subject were divided into doe groups based on weight length index (WLI). Anthropometric data showed that the mean height and weight were 169.5 $\pm 8.2 cm and 55.1 $\pm 11.5 kg in the male students and 158.9 $\pm 5.9 cm and 48.1 $\pm 7.6 kg in the female students. The mean WLIs for male and female students were 103.0 $\pm 19.7 and 96.3 $\pm 12.8, respectively. Of the male students 27.9% and of the female students 32.1% were underweight, and of the male students 28.9% and of the female students 13.0% were overweight based on WLI index. Lack of good dietary habits in the overweight group tended to be the highest, the normal group was the second highest, and the underweight group was the lowest. The regularity of eating breakfast and flood prejudice scores in the overweight group were significantly higher than those in the normal and underweight group. With respect to flood intake, the normal group tended to consume grains, yellow or green vegetables, vegetables with light color, fruits, milk, yogurt, cheese, seaweeds, fat-floods, instant floods, sweet floods, carbonated drinks, and spicy and salty floods more frequently. The underweight group tended to consume meat-ham, eggs, fish and fried, stir-fried flood more frequently In dietary attitudes, the overweight group tended to have more favorable dietary attitudes, and the normal group tended to have negative dietary attitudes. The underweight group showed more negative responses to trying to eat/drink milk, yogurt, or cheese everyday than the overweight groups. It might be suggested that more effective nutritional programs should be developed and implemented to ensure good dietary habits in middle school students, including the overweight, as well as the underweight group. Further research on the comparison of dietary characteristics is needed, with consideration of the subjects WLI.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.369-374
• /
• 2009

Recently, the number of design for open-spaces at waterfront, such as open-air restaurant and cafeteria, has been increasing to provide openness and natural environment of waterfront. However, when planning open-air restaurant and cafeteria, it is essential to investigate the climate characteristic of waterfront, especially wind environment, since the waterfront has a special quality of climate like low-temperature and strong wind which differs from downtown or inland In this study, wind environments of Haeundae, Suyoungrnan, and Gwanganli, the famous waterfronts in Busan, were investigated for design of open-air restaurants and open cafeterias. The main results were as follows. 1) the waterfront area of Haeundae, Suyoungman, and Gwanganli is suitable for open-air restaurant and open cafeterias; and 2) the appropriate period for open space in this area is from the end of March to November.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.59.2-59.2
• /
• 2009

화학보호복은 독성이 있는 화학물질 및 미세분진등에 대해 공기를 차단하며 완전 밀폐형으로 공기호흡기 및 에어라인 같은 호흡보호장치와 함께 착용하여 신체부위를 보호한다. 그 예로 생물/화학보호복은 유독하고 해로운 생물/화학물질로 부터 인체를 보호해준다. 이들 보호복은 다양한 환경이 노출되어 장시간 작업을 위해서 오랜시간 보호성능을 유지해야한다. 특히, 이런 원단의 구성은 플라스틱과 고무류의 다층구조로 구성되어있다. 플라스틱류(폴리에틸렌, PTFE 등)는 표면장력이 너무 낮아 접착하는데 어려운 점이 많이 대두된다. 일반적인 표면처리방법은 크게 물리화학적 방법으로 4가지로 분류한다. 화학적산화, 불꽃처리, 플라즈마처리, UV 방사법 등이 있다. 이들 중에서 가장 간단한 산화처리는 플라즈마처리다. 이처리는 상온/상압하에서 대기 중 또는 가스내에 방전에 의해 플라즈마를 형성하고 이 플라즈마가 대상물의 표면분자와 격렬히 반응하게 하여 표면의 분자구조를 변화시킴에 따라 소수성의 표면에 Carboxyl, hydroxyl과 carbonyl과 같은 친수성으로 변하여 결합능력을 증가 시켜 표면장력을 높여주는 가장 효과적인 방법이다. 플라즈마 표면처리를 하고 나면 육안으로 표면의 변화를 감지할 수 없지만 접착, 잉크, 코팅을 잘 받아들이는 결과를 가져온다. 플라즈마 표면처리의 효과는 주로 부도체의 필름이나 합성수지 계열의 인쇄성과 접착성을 향상시키고자 많이 활용되고 있는 실정이다. 특히, 화학보호복과 같은 플라스틱류인 다양한 고분자 합성수지(Polyethylene, polypropylene, nylon, vinyl, PVC, PET 등)에 적용가능하다. 본 연구에서는 플라즈마처리조건에 영향을 주는 변수들을 고려하여 실험계획법(DOE, RSM)을 이용하여 최적화된 플라즈마 공정을 향상시키고자한다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.185-196
• /
• 2006

Statement of problem: The researches on the influence of design variables on the stress distribution in cortical and trabecular bones and on optimal design for implant system were limited. Purpose: The purpose of this study is to identify the sensitivities of design parameters and to suggest the optimal parameters for designing the onebody type implant system. Material and methods: Stresses arising in the implant system were obtained by finite element analysis using a three dimensional model. An onebody type implant system[Oneplant (Warrantec. Co. Ltd., Korea)] was considered in this study. Vortical load(150 N) was applied on the top of the abutment along the axial direction. The initial design variables set for sensitivity analysis were radius of fixture, numbers of micro thread, numbers of power thread, height of micro thread, future length, tapered angle of future, inclined angle of thread, width of micro thread and width of power thread. The statistical technique of Design of Experiments(DOE) was applied tn the simulation model to deduce effective design parameters on stress distributions in bones. The deduced design parameters were incorporated into a fully automated design tool which is coupled with the finite element analysis and numerical optimization to determine the optimal design parameters. Results: 1. The result of sensitivity analysis showed six design variables - radius of future, tapered angle of fixture, inclined angle of thread, numbers of power thread, numbers of micro thread and height of micro thread - were more influential than the others. 2. The optimal values of design variables can be deduced by coupling finite element analysis (FEA) and design optimization tool(DOT).

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.175-180
• /
• 2009

In this study, the basic data were collected for improving the amenity of indoor environment of a super yacht and the performance of indoor environment was analyzed by utilizing measured data during summer period. Through the results of examination, the following conclusions are drawn. 1) It is estimated that, in case of closing the door of Saloon connected with outside, there is little inflow of exhaust gas, but when the door is open, the indoor-air might be polluted so fast. Therefore, it is necessary to make a counter plan about the method of ventilation and amount of ventilation to keep the indoor aerial environment agreeable. 2) It is urgent to conceive countermeasure against engine noise because the noise level of all rooms exceeds 60dB, which is regulation of noise for protecting crew established in ship's classification, during the sailing. 3) State cabin and Guest cabin are super cooled by operating air conditioner exceeding agreeableness extent and it is needed to prevent them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1491-1497
• /
• 2004

The psychoacoustic model in MPEG audio layer-III (MP3) encoder is optimized for the fixed-point processing. The optimization process consists of determining the data word length of arithmetic unit and the algorithm for transcendental functions that are often used in the psychoacoustic model. In order to determine the data word length, we defined a statistical model expressing the relation between the fixed-point operation errors of the psychoacoustic model and the probability of alteration of the allocated bits doe to these errors. Based on the simulations using this model, we chose a 24-bit data path and constructed a 24-bit fixed-point MP3 encoder. Sound quality tests using the constructed fixed-point encoder showed a mean degradation of -0.2 on ITU-R 5-point audio impairment scale.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.409-425
• /
• 2006

치주질환의 병원균은 세포벽의 항원에 의하여 조직내 존재하는 mononuclear phagocytes가 활성화되어 cytokine들이 생성됨 으로써 치주 결체조직의 파괴를 진행시킨다. 이런 관련된 cytokine들은 순차적으로 상주하는 치은세포 및 대식세포가 Matrix metalloproteinase 합성을 하도록 유도하여 조직파괴를 시작한다. 이들 Matrix metalloproteinase중 MMP-2, MMP-9 (Gelatinase A,B)는 type IV collagen 및 변성된 interstitial collagen을 파괴하며 치주환자의 치은 열구액, 치은조직, 타액 네에서 높게 보고 되어왔다. 당뇨병은 치주질환의 위험요소중 하나로 달뇨 환자에서는 치주질환의 유병율이 일반인에 비해 높고 치주질환의 중증도도 더 심하여 진행도 빠르다고 알려져 있다. 그 병리 기전 중 하나로는 당뇨 환자에서는 치은 열구액 내 중성구 유래의 Matrix metalloproteinase의 활성 증가 및$TNF-{\alpha}$ 의 활성 증가가 추정되고 있다. 본 실험에서는 제2형 당뇨병 환자와 비당뇨 환자들에서 만성 치주염 부위의 치은 및 건강한 치은에서 염증매개체 중 하나인 MMP-2, MMP-9 및 $TNF-{\alpha}$ 의 발현에 대해 상호 비교 분석함으로서 염증, 혈당이 미치는 영향을 밝히고 제 2형 당뇨병 환자에서 심한 치주조직 파괴의 기전을 연구하고자 하였다. 경북대학교병원 치주과 내원환자 중 제2형 당뇨병 환자와 비당뇨 환자들 및 치주질환이 없는 건강인 대조군을 대상으로 여러 가지 환자요소, 임상 치주상태를 기록하고, 전신적으로 건강한 환자의 건강한 부위(n=8,Group 1), 전신적으로 건강한 환자으 만성 치주염 부위(n=8, Group 2), 제2형 당뇨병 환자의 만성 치주염 부위 (n=8,Group 3)에서 각각 변연치은을 채득하고 액화질소에 급속 동결하였다. Western blotting을 이용하여 각 조직 내 MMP-2, MMP-9 및 $TNF-{\alpha}$ 의 발현을 관찰, densitometer를 이용하여 상대적 발현을 정량, 각 조직의${\beta}-actin$을 이용하여 표준화하여 실험군과 대조군들의 평균치를 비교하였다. 비당뇨 환자들의 만성 치주염 부위 및 제2형 당뇨병 환자의 만성 치주염 부위에서 모두 건강 대조군에 비해 MMP-2와 MMP-9 의 발현이 증가되었다. 또한 MMP-2와 MMP-9는 2형 당뇨 환자의 만성 치주염 부위가 비당뇨 환자의 만성 치주염 부위보다 증가된 발현양상을 보였으며, $TNF-{\alpha}$ 발현 비교시 각 군간 유의성 있는 변화는 없었으나 2형 당뇨환자군에서 MMP-2 및 MMP-9의 증가와 함께 다소 증가 양상을 보였다. 결론적으로 본 실험에서 MMP-2 및 MMP-9의 증가가 만성 치주염 및 2형 당뇨 환자에서의 만성치주염에서 비당뇨환자 보다 MMP-2, MMP-9의 증가양상을 보여 주었으며 $TNF-{\alpha}$ 가 2형 당뇨환자의 만성치주염 진행과정에 기여인자로써 역할을 하는 것으로 생각된다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.182-182
• /
• 1996

Annexin I is a member of the annexin family of calcium dependent phospholipid binding proteins and has anti-inflammatory activity by inhibiting phospholipase A$_2$ (PLA$_2$). Recent X-ray crystallographic study of annexin I identified six Ca$\^$2+/ binding bites, which was different types (type II, III) from the well-known EF-hand motif (type I). In this work, the structure of annexin I was studied at atomic level by using $^1$H, $\^$15/N and $\^$l3/C NMR(nuclear magnetic resonance) spectroscopy, and the effect of Ca$\^$2+/ binding on the structure of annexin I was studied, and compared with that of Mg$\^$2+/ binding, When Ca$\^$2+/ was added to annexin I, NMR peak change was occured in high- and low-field regions of $^1$H-NMR spectra. NMR peak change by Ca$\^$2+/ binding was different from that by Mg$\^$2+/ binding. Because annexin I is a larger protein with 35 kDa molecular weight, site-specific (amide-$\^$15/N, carbonyl-$\^$l3/C) labeling technique was also used. We were able to detect methionine, tyrosine and phenylalanine peaks respectively in $\^$13/C-NMR spectra, and each residue was able to be assigned by the method of doubly labeling annexin I with [$\^$13/C] carbonyl-amino acid and [$\^$15/N] amide-amino acid. In $\^$l3/C-NMR spectra of [$\^$13/C] carbonyl-Met labeled annexin I, we observed that methionine residues spatially located near Ca$\^$2+/ binding Sites Were Significantly effected by Ca$\^$2+/ binding. From UV spectroscopic data on the effect of Ca$\^$2+/ binding, we knew that Ca$\^$2+/ binding sites of annexin I have cooperativity in Ca$\^$2+/ binding. The interaction of annexin I with PLA$_2$ also could be detected by using heteronuclear NMR spctroscopy. Consequently, we expect that the anti-inflammatory action mechanism of annexin I may be a specific protein-protein interaction. The residues involved in the interaction with PLA$_2$ can be identified as active site by assigning NMR peaks effected by PLA$_2$ binding.