• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.254-260
• /
• 1995

A method is described for the design and fabrication of the sensor interface circuits on the Clark electrodes for the dissolved oxygen(DO). The discussion includes a method for the +5 V single-supply driving for the sensor circuits, which has low power comsumption for the front-end electronics. DO probe under test is composed of the Clark electrode with silver anode, gold cathode and the electrolyte of half saturated KCI solution and the FEP teflon memtrance for the oxygen penetration. Typical polarograms for the DO probes by using this sensor circuit reveals high accuracy over 99% of the I to V conversion. Partial pressure of oxygen obtained from the polarograms are well suited to the results calculated. It is expected that the proposed sensor circuits can be utilized into the customized IC for the battery-driven small-size DO meters.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.122-125
• /
• 2008

Sensors used in many USN (Ubiquitous Sensor Network) domain applications generate a large amount of sensor stream data. The volume of sensor stream data is too huge to store the whole data and data speed is too fast to control each of them. In order to provide rapid and reliable context analysis service over sensor stream data, we propose a WHEN-DO context analysis model that supports the functionality of sliding window. This model is designed to be used as follows: If the sensor stream data satisfies condition in 'WHEN' clause, then it will execute actions in 'DO' clause in WHEN-DO context analysis model. The proposed WHEN-DO context analysis model can be applied to many other USN environment applications such as monitoring the status of a building and then taking actions in corresponding context condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.376-378
• /
• 1995

A method is presented for the design and fabrication of the temperature compensation circuits on the Clark electrodes for measuring the dissolved oxygen(DO) concentration. The discussion includes a method of the sensor interface circuits for the DO sensor. Typical polarograms for the DO probes under test using this sensor circuits are presented. High accuracy over 99 % of the I to V conversion using the proposed circuit is verified. Temperature dependence for the test DO probe is well compensated automatically using the thermistor($2k\Omega,\;25^{\circ}C$) in series with correction resistor in the feedback loop of the op-amp circuit in the temperature range of the 0-50$^{\circ}C$.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.679-686
• /
• 2022

본 논문에서는 라즈베리파이 카메라와 DO(Dissolved Oxygen)센서를 사용하여 수중에 존재하는 녹조를 인식하고 녹조를 제거하는 기능을 갖는 녹조제거장치를 구현하였다. 라즈베리파이 보드는 카메라로부터 취득한 RGB 값을 HSV로 변환하여 녹조의 색을 인식한다. 이를 통해 녹조의 위치를 파악하고, DO 센서를 활용해 해당 위치의 용존산소량의 감소량이 기준치 이상일 경우 녹조제거장치가 녹조 제거 용액을 살포하도록 구동한다. 라즈베리파이의 카메라는 OpenCV를 활용하였고, 모터의 움직임은 DO 센서의 출력값과 카메라의 녹조인식 결과에 따라 제어한다. 녹조인식 및 녹조제거용액의 살포 기능은 아두이노와 라즈베리파이를 통해 구현되었으며 실험을 통해 제안한 이동식 녹조제거장치의 타당성을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.86-88
• /
• 1996

A method is presented for the development of the PC-based measurement system on the 6 cathodes-single anode type multi-functional oxygen electrodes for detecting various components of the solution by measuring the dissolved oxygen(DO) concentration. The system is consisted with the 6 channel sensor signal modyfing circuits for the sensor and the PC interface circuits using the single chip microprocessor 80c196kc. Typical polarograms for the DO probes under test using this sensor circuits are presented. This system covers wide range of measuring time from 300sec to over 16 hour in one measurement step by programming the 9 monitor disply mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.180-181
• /
• 2008

Recently, USN applications are in the early stage of commercialization. But, there are still several problems to develop USN applications. It is mainly due to the current development scheme that solution vendors makes all of them including HW, SW, sensor modules. The development of USN applications could be revitalized if three entities such as PC platform developers, PC device vendors, and application developers would do their best as in PC development. In this paper, we suggest an sensor node platform architecture supporting sensor independency to overcome the difficulty of developing USN applications. Traditional platforms like Tiny-OS and Nano-Q+ do not support such sensor independency. At first, we present a unified API for sensor independency, and also suggest an architecture to support sensor independancy. Our architecture results in the revitalization of developing USN applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.764-766
• /
• 1998

An evaluation method for oxygen permeable characteristics of the membrane covering to each cathode of multiple cathode - single anode type dissolved oxygen sensor, which has high reproducibility and is capable of measuring multiple components in solutions. For this purpose, a measuring circuit for the multiple cathode type DO sensor was designed to lower the noise signal by adapting a digital LPF to readout the sensor output accurately. Digital LPF is designed by setting up the transfer function to set the cutoff frequency to 10Hz, and the transfer function is programmed by C language, and then the filtering characteristics are evaluated with the simulation and experiments. Using this LPF added measuring circuit for the multiple cathode type DO sensor, we have obtained the calibration factor for each cathode to calibrate the variation of the output signals. The calibration factor was obtained by measuring the sensor output signal followed by oxygen partial pressure, using the same oxygen permeable membrane at each cathode of the multiple cathode type DO sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.403-405
• /
• 1993

The ultrasonic sensor used in autonomous mobile robot and autonomous guided vehicle(A.G.V.) is not available for long range measurement. And as the performance of autonomous mobile robot and A.G.V. improves, the importance of the range sensor for long range measurement is increasing. In this paper, we introduce the range sensor for long range measurement using milimeter wave sensor and propose the structure of that system.

• International Journal of Contents
• /
• 제7권4호
• /
• pp.35-43
• /
• 2011

USN is a technology to detect human external environment. It is an important factor in buildinga ubiquitous computing environment. In this thesis, an authentication method was proposed to allow the sensor nodes, which have weak computing operation capability, to safely communicate with each other in USN and guarantee the anonymity of users for their privacy. In the proposed authentication method that takes into account the characteristics of sensor network, sensor nodes based on a symmetric key algorithm do not transfer keys directly, instead, they mix the random numbers received from AS to generate keys necessary for communications, having a master key and a pseudo-random number generator.In addition, in this thesis, TA was adopted to minimize the leakage of users' information, and a scheme through which virtual IDs received from AS are delivered to sensor nodes was applied to improve anonymity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1546-1564
• /
• 2012

Pattern-based query processing has not attracted much attention in wireless sensor network though its counterpart has been studied extensively in data stream. The methods used for data stream usually consume large memory and much energy. This conflicts with the fact that wireless sensor networks are heavily constrained by their hardware resources. In this paper, we use piece wise representation to represent sensor nodes' collected data to save sensor nodes' memory and to reduce the energy consumption for query. After getting data stream's and patterns' approximated line segments, we record each line's slope. We do similar matching on slope sequences. We compute the dynamic time warping distance between slope sequences. If the distance is less than user defined threshold, we say that the subsequence is similar to the pattern. We do experiments on STM32W108 processor to evaluate our strategy's performance compared with naive method. The results show that our strategy's matching precision is less than that of naive method, but our method's energy consumption is much better than that of naive approach. The strategy proposed in this paper can be used in wireless sensor network to process pattern-based queries.