• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.420-428
• /
• 2019

This study is the heating energy saving test of the high-bed strawberry crown heating system. The system consists of electric hot water boiler, thermal storage tank, circulation pump, crown heating pipe(white low density polyethylene, diameter 16mm) and a temperature control panel. For crown heating, the hot water pipe was installed as close as possible to the crown part after planting the seedlings and the pipe position was fixed with a horticultural fixing pin. In the local heating type, hot water at $20{\sim}23^{\circ}C$ is stored in the themal tank by using an electric hot water boiler, and crown spot is partially heated at the setting temperature of $13{\sim}15^{\circ}C$ by turning on/off the circulation pump using a temperature sensor for controlling the hot water circulation pump which was installed at the very close to crown of strawberry. The treatment of test zone consisted of space heating $4^{\circ}C$ + crown heating(treatment 1), space heating $8^{\circ}C$(control), space heating $6^{\circ}C$ + crown heating(treatment 2). And strawberries were planted in the number of 980 for each treatment. The heating energy consumption was compared between November 8, 2017 and March 30, 2018. Accumulated power consumption is converted to integrated kerosene consumption. The converted kerosene consumption is 1,320L(100%) for space $8^{\circ}C$ heating, 928L(70.3%) for space $4^{\circ}C$ + crown heating, 1,161L($88^{\circ}C$) for space $6^{\circ}C$ + crown heating). It was analyzed that space $4^{\circ}C$ + pipe heating and space $6^{\circ}C$ + crown heating save heating energy of 29.7% and 12% respectively compared to $8^{\circ}C$ space heating(control).

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.477-483
• /
• 2020

We constructed a stand yield table for Chamaecyparis obtusa based on data from an actual forest. The previous stand yield table had a number of disadvantages because it was based on actual forest information. In the present study we used data from more than 200 sampling plots in a stand of Chamaecyparis obtusa. The analysis included theestimation, recovery and prediction of the distribution of values for diameter at breast height (DBH), and the result is a valuable process for the preparation ofstand yield tables. The DBH distribution model uses a Weibull function, and the site index (base age: 30 years), the standard for assessing forest productivity, was derived using the Chapman-Richards formula. Several estimation formulas for the preparation of the stand yield table were considered for the fitness index, and the optimal formula was chosen. The analysis shows that the site index is in the range of 10 to 18 in the Chamaecyparis obtusa stand. The estimated stand volume of each sample plot was found to have an accuracy of 62%. According to the residuals analysis, the stands showed even distribution around zero, which indicates that the results are useful in the field. Comparing the table constructed in this study to the existing stand yield table, we found that our table yielded comparatively higher values for growth. This is probably because the existing analysis data used a small amount of research data that did not properly reflect. We hope that the stand yield table of Chamaecyparis obtusa, a representative species of southern regions, will be widely used for forest management. As these forests stabilize and growth progresses, we plan to construct an additional yield table applicable to the production of developed stands.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.390-399
• /
• 2020

We investigated the effect of seedling age and planting density on early growth performance of Zelkova serrata trees. Containerized Z. serrata seedlings, 1-year-old and 2-year-old, were planted according to two different planting densities (3,000 and 5,000 trees ha-1) at the end of March, 2017. Three plots were established for each treatment (2 seedling ages × 2 planting densities). We calculated the survival rate (%) of out-planted seedlings as well as the stem volume based on the root collar diameter (RCD) and height (H) in September of each year, from 2017 to 2019. Seedling age and planting density did not affect survival rate of the out-planted trees. Planting density did not affect height of the trees, whereas the treatment significantly affected RCD and the H/D ratio for 2-year-old seedlings in 2019. The stem volume per tree was highest in the plot of 2-year-old seedlings at 5,000 trees ha-1 and lowest in the 1-year-old seedlings at 3,000 trees ha-1. In addition, the tree height in both 1-year-old and 2-year-old Z. serrata trees was greater in the 5,000 trees ha-1 plot than in the 3,000 trees ha-1 plot. There was no interactive effect between seedling age and planting density on stem volume; however, as seedling age and planting density increased, stem volume of Z. serrata trees increased. The values for stem volume per hectare are 85%, 68%, and 300% higher in 1-year-old 5,000 trees ha-1, 2-year-old 3,000 trees ha-1, and 2-year-old 5,000 trees ha-1 plots, respectively, compared to the values in 1-year-old 3,000 trees ha-1. This result shows that high planting density (close planting) affects tree growth differently based on seedling age, and suggests that the planting density of 5,000 trees ha-1 is suitable for 2-year-old seedlings to improve early growth field performance.

• Journal of Mushroom
• /
• v.19 no.2
• /
• pp.88-95
• /
• 2021

This study was carried out to breed new variety of Pleurotus nebrodensis. We have collected and tested characteristics of genetic resources from domestic and abroad since 2015. The varieties of P. nebrodensis from China are grown by farmers, but those have been unstable fruiting and are weak against bacterial diseases. To solve this problem, we bred the unique domestic variety 'Uram' of P. nebrodensis and the results of the characteristic test for the new 'Uram' are as follows. The proper temperature for the mycelial growth was 26~29℃ and fruit body growth temperature was 15~18℃. It was similar to the control variety KME65035 of P. nebrodensis in the pileus form of a flat and white color. The number of days required for initial fruting was 5 days for bottle cultivation and 6 days for bag cultivation which was 2-4 days shorter than that of the control variety. The pileus diameter was 32.6-37.0 mm which was smaller but the fruit body length was 130.4 mm, which was longer than those of the control variety. The effective number of fruit bodies was 1.8 in bottle cultivation and 2.9 in bag cultivation, which was more than those of the control variety. The yield rate was 93.3-100%, which was more stable than those of the control variety. In bottle cultivation and bag cultivation, the yield was 173.1 g/bottle (1100 cc) and 283.4 g/bag (1.2 kg), respectively, which was 25-44% higher than those of the control variety 138.0 g/bottle (1100 cc) and 197.4 g bag (1.2 kg). When incubating the parent and control varieties of 'Uram', the replacement line was clear and as a result of mycelial DNA RAPD-PCR reaction, the band pattern was different from that of the parent and control varieties, confirming the hybrid species.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.352-358
• /
• 2011

Field Cage plots ($1m{\times}1m{\times}1m$) were established (7 units) to find the lowest limit time about the tending of red pine forest (Pinus densiflora) which can no longer be used as a habitat by Monochamus alternatus, vector insect of pine wilt disease at the experimental forest of the southern forest research center of the Korea forest research institute in February in 2010. Thinning slashes (length, 1 m; diameter, 5~10 cm) tended at the different times were put in cages, and 4~6 couples of adult M. alternatus were put into each the cage in June. Presence or absence the larval entrance holes and larval were determined in November in 2010. Incase of the combination 24, 18, 12 and 6-month-old thinning slashes from thinning times to the time of adult emergence inside a single cage, larval entrance holes were found in the 6-month-old and 12-month-old thinning slashes but larvae were found only in the 6-month-old thinning slashes (treatment 1). In case of the combination 24, 18, 15 and 12-month-old thinning slashes inside a single cage, larval entrance holes were found in the 15-month-old and 12-month-old thinning slashes but larvae were found only in the 12-month-old (treatment 2). When 24, 18, 15, 12 and 6-month-old thinning slashes with treated dry and humid condition were put separately inside each cage, larval entrance holes were found in the 18, 15, 12, 6-month-old thinning slashes without the relation of the dry and humid conditions. But larvae were found in the 15, 12, 6-month-old thinning slashes in the dry conditions and only in the 6-month-old thinning slashes in the humid conditions. Results indicated the lowest limit time which can no longer be used as a habitat by M. alternatus is before 24 month from the time of adult emergence.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.116-123
• /
• 2011

This study investigates the characteristics(form, material, structure, method of construction, vegetation) and model of lotus pond in Joseon Royal Tombs for conservation and restoration. The objects of study are the lotus pond of Namyangju Gwangreung, Hyoreung, Gimpo Jangreung and Sungreung that are well-preserved and the record is remaining. The form is two plane types, square shaped include an island and square shaped. The pond is 7.5~81m in width and 6.5~45m in length and the island is 8~16m in diameter. The depth of water is 0.5~1.2m and the cross section form is narrow bottom and wide top. The material of shore protection is soil in Hyoreung, Gimpo Jangreung and Sungreung. The bottom is mud in all sites. I think that the main material of the lotus pond in Joseon Royal Tombs is soil. The lotus pond is built by soil bank in the structure and method of construction. The water supply and drainage are worked through the culvert. There are many kinds of plants in the lotus pond today, however I think that the model of vegetation of lotus pond in Joseon Royal Tombs is lotus the inside, pine tree, fir tree and flowers the around and pine tree the inside of island in compared the present and the old literature. In comparison with the lotus pond in Joseon Royal Tombs and the lotus pond in the Joseon palace, the material is the biggest difference. The main material is soil in Royal Tombs but isodomic in Royal Palace. I think that the difference of material in between two causes the difference of structure and method of construction. The Royal Tombs is valuable in architecture, landscape and esthetics, this study investigated the characteristics and model of lotus pond in Joseon Royal Tombs. I think that this study serves as a momentum to find a traditional technique in Royal water space and offer the foundation to plan in the contemporary water space.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.52-61
• /
• 2011

Whereas recent researches have elucidated the positive ecological roles of large wood (LW) in fishbearing channels, LW is also recognized as a negative factor of log-laden debris flows and floods in densely populated areas. However in Republic of Korea, no study has investigated longitudinal variations of LW distribution and dynamic along the stream corridor. Hence to elucidate 1) physical factors controlling longitudinal distribution of LW and 2) their effect on variation in LW load amount, we surveyed the amount of LW with respect to channel morphology in a mountain stream, originated from Mt. Ki-ryong in Inje, Gangwondo. Model selection in the Generalized Linear Model procedure revealed that number of boulder (greater than or equal to 1.0 m in diameter), bankfull channel width and their interaction were the best predictors explaining LW load volume per unit channel segment area (unit LW load). In general, boulders scattered within small mountain streams influence LW retention as flow obstructions. However, in this study, we found that the effect of the boulders vary with the channel width; that is, whereas the unit LW load in the segment with narrow channel width increased continuously with increasing boulder number, it in the segment with wide channel width did not depend on the boulder number. This should be because that, in two channels having different widths, the rates of channel widths reduced by boulders are different although boulder numbers are same. Our findings on LW load varying with physical factors (i.e., interaction of boulder number and channel width) along the stream corridor suggest understanding for longitudinal continuum of hydrogeomorphic and ecologic characteristics in stream environments, and these should be carefully applied into the erosion control works for systematic watershed management and subsequent disaster prevention.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.196-202
• /
• 2011

In this paper, a series of alkyl succinic acid esters for base oil were synthesized by condensation reaction of succinic anhydride and fatty alcohol. The structures of the synthesized esters were confirmed by $^1H-NMR$, FT-IR spectrum and GC analysis. Basic properties of esters such as kinematic viscosity (KV), refractive index (RI), total acid number (TAN) and pour points were measured and lubricating properties such as SRV wear scar diameter (SRV WSD), fraction coefficient (COF) and 4-ball wear (4-ball WSD) were also evaluated. As the results of basic properties, KV, RI and pour point of synthetic esters increased as the carbon chain of the esters increased. Measurement value of total acid number (TAN) was indicated between 0.2~4 mgKOH/g, and that metal working fluids and pressure working oils are acceptable to use as base oil. Also, lubricating properties of the esters showed as follows: 0.391~0.689 mm of SRV WSD, 0.110~0.138 of SRV COF and 0.49~0.55 mm of 4-ball WSD depended on the structure of the esters. In a comparison on the lubrication capacity of the SRV test based on polyester TMPTO, SRV WSD result showed that a better performance caused by the alkyl group. On the other hand, SRV COF test was not influenced of the alkyl group which the capacity of the lubricant was sightly diminished than the comparison material, regardless of the alkyl group.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.27-39
• /
• 2011

The study on Musan twelve peaks of Yongho garden in Jinju, Gyeongnam was anticipated to provide data and implication for reproducing similar spaces and modern changes in terms of design factor since it is the prototype of traditional mount for overcoming monotonous geographical features and intriguing changes and interests. The study analyzed and interpreted the symbolism of twelve peaks, principles of space composition and function and effect of visual construction that were pursued by the builder in terms of landscape view, which results are as following. The center of Yongho garden, Yonghoji(龍虎池) is a typical man-made pond for a supportive feng shui feature. It is a supporting equipment to complete the state of feng shui, and the result of strengthening the completion through the connection with the dragon-related name of the place. The shape of Musan twelve peaks looks like an oval form of Geumseongsan(金星山), 2~3.5m in height and 6~12m in diameter. Peaks are estimated as 1.5~3.7m(2.4m in average) in height, $35{\sim}138m^2$($73.4m^2$ in average) in area, and $30.7{\sim}115.0m^3$($62.5m^3$ in average) in volume. Given that Yonghojeong(龍虎亭), Soseon(小船), the site of main building and Yongsanjae(龍山齋) stand in line, Yonghoji was presumed as the state of enlightenment through ascribing the meaning to virtue and secularity. For the intention of realizing Musan twelve peaks, the builder probably had mounted twelve peaks forming the body of dragons with crossing the point corresponding to a head of tiger, and located Musan twelve peaks and Yonghojeong with a representation of dragons holding Cintamani rising into the sky in the center. The middle area near Musan twelve peaks surrounded by peaks like Geumseongsan running north and south shows a multi-structure of multilayer, maintaining the similarity centering on Yonghoji. It is considered the intention of mount planned at the time of Musan twelve peaks construction, caused by similar form harmony. Internalization of progressive realization through concealment and exposure, enframement effect and spatial order like prospect-refuge theory in the mount of Musan twelve peaks is considered the reflection of the intention to increase depth of the view and expectancy through the various degree of exposure and surroundings of each peak and the colorful combination of viewing and shutting. The "closed view" by Musan twelve peaks creates interesting, vivid and attractive recognition of the view, which is more effective in bringing depth of the view and interests in terms of the geographical design, particularly the area around Yonghoji. Moreover, it was identified that the combination of peaks can be formed resulted from the view configuration concerning the location through multilayer effect reveals an island through the other one when viewed from Yonghojeong.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.65-71
• /
• 2021

This study was carried out to investigate the effect of the final irrigation timing (FIT) before packaging for long-term transportation on growth, flowering, and crop quality of Phalaenopsis after simulated dark shipping (SDS). Phalaenopsis Sogo Yukidian 'V3' plants grown in 11 cm-diameter plastic pots filled with potting media (sphagnum moss + bark or only sphagnum moss) were packaged in paper boxes for export at 3.5, 7, 10 days (FIT 3.5, 7,10; Experiment 1) and 4, 6, 8, 10 days (FIT 4, 6, 8, 10; Experiment 2) after the final irrigation and then stored in a growth chamber at 20 ± 1℃ and 70 ± 3% RH created for SDS. After 4 weeks, the plants were taken out and grown in a greenhouse at 23 ± 3℃ and 70 ± 5% RH, and crop characteristics were measured during cultivation. In Experiment 1, the survival rate of FIT 3.5 plants was lower than that of FIT 7 and FIT 10. There was no difference between treatments in days to first flower, the number of florets, and the elongation rate of flower stalks. In Experiment 2, the percentage of rotted leaves was lowest in FIT 6 when before forcing and at 12 weeks after forcing, and that of FIT 8 was similar to FIT 6 when before forcing, but slightly increased after 12 weeks. The percentage of rotted leaves of FIT 10 was highest and that of FIT 4 was also high. There was little difference in flowering characteristics among treatments. In conclusion, the FIT before packaging for long-term (4 weeks) transportation of potted Phalaenopsis 'V3' affected the leaf rot rather than the post-shipping growth and flowering. And it was considered appropriate to set the volumetric water content of the potting media just before packaging to about 30%.