• ETRI Journal
• /
• 제26권6호
• /
• pp.615-621
• /
• 2004

Next generation mobile communication system, such as IMT-2000, adopts Turbo codes due to their powerful error correction capability. This paper presents a block-wise maximum a posteriori (MAP) Turbo decoding structure with a low memory requirement. During this research, it has been observed that the training size and block size determine the amount of required memory and bit-error rate (BER) performance of the block-wise MAP decoder, and that comparable BER performance can be obtained with much shorter blocks when the training size is sufficient. Based on this observation, a new decoding structure is proposed and presented in this paper. The proposed block-wise decoder employs a decoding scheme for reducing the memory requirement by setting the training size to be N times the block size. The memory requirement for storing the branch and state metrics can be reduced 30% to 45%, and synthesis results show that the overall memory area can be reduced by 5.27% to 7.29%, when compared to previous MAP decoders. The decoder throughput can be maintained in the proposed scheme without degrading the BER performance.

• ETRI Journal
• /
• 제27권5호
• /
• pp.491-496
• /
• 2005

An application specific processor for an H.264 decoder with a configurable embedded processor is designed in this research. The motion compensation, inverse integer transform, inverse quantization, and entropy decoding algorithm of H.264 decoder software are optimized. We improved the performance of the processor with instruction-level hardware optimization, which is tailored to configurable embedded processor architecture. The optimized instructions for video processing can be used in other video compression standards such as MPEG 1, 2, and 4. A significant performance improvement is achieved with high flexibility. Experimental results show that we could achieve 300% performance for the H.264 baseline profile level 2 decoder.

• 디지털산업정보학회논문지
• /
• 제11권3호
• /
• pp.45-51
• /
• 2015

In this paper, we discuss the belief propagation decoding algorithm for polar codes. The performance of Polar codes for shorter lengths is not satisfactory. Motivated by this, we propose a novel technique to improve its performance at short lengths. We showed that the probability of messages passed along the factor graph of polar codes, can be increased by multiplying the current message of nodes with their previous message. This is like a feedback path in which the present signal is updated by multiplying with its previous signal. Thus the experimental results show that performance of belief propagation polar decoder can be improved using this proposed technique. Simulation results in binary-input additive white Gaussian noise channel (BI-AWGNC) show that the proposed belief propagation polar decoder can provide significant gain of 2 dB over the original belief propagation polar decoder with code rate 0.5 and code length 128 at the bit error rate (BER) of $10^{-4}$.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.379-388
• /
• 2007

In this paper, we propose an adaptive turbo decoding algorithm for high order modulation scheme combined with originally design for a standard rate-1/2 turbo decoder for B/QPSK modulation. A transformation applied to the incoming I-channel and Q-channel symbols allows the use of an off-the-shelf B/QPSK turbo decoder without any modifications. Adaptive turbo decoder process the received symbols recursively to improve the performance. As the number of iterations increase, the execution time and power consumption also increase as well. The source of the latency and power consumption reduction is from the combination of the radix-4, dual-path processing, parallel decoding, and early-stop algorithms. We implemented the proposed scheme on a field-programmable gate array (FPGA) and compared its decoding speed with that of a conventional decoder. From the result of implementation, we confirm that the decoding speed of proposed adaptive decoding is faster than conventional scheme by 6.4 times.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.409-410
• /
• 2008

This paper presents nonlinear and parallel design for synchronous pipelining in IP-based H.264 decoder implementation. Since H.264 decoder includes the dataflow of feedback loop, the data dependency requires one NOP stage per pipelining latency to drop the throughput into 1/2. Further, it is found that, in execution time, the stage scheduled for MC is more occupied than that for CAVLD/ITQ/DF. The less efficient stage would be improved by nonlinear scheduling, while the fully-utilized stage could be accelerated by parallel scheduling of IP. The optimization yields 3 nonlinear {CAVLD&ITQ}|3 parallel (MC/IP&Rec.)| 3 nonlinear {DF} pipelined architecture for IP-based H.264 decoder. In experiments, the nonlinear and parallel pipelined H.264 decoder, including existing IPs, could deal with full HD video at 41.86MHz, in real time processing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.373-376
• /
• 1999

In tills paper, we design it decoder for the FLEX high speed paging protocol. The decoder that we design consists of a synchronizer, a de-interleaver, a error corrector and a packet builder In the FLEX protocol, a word is coded using HCH algorithm. In this design, we do not use a look-up table in order to decrease a chip area of the BCH decoder. The simulation result shows that the decoder is correctly designed

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.549-552
• /
• 2003

In this paper, an efficient architecture of a versatile Reed-Solomon (RS) decoder is designed, where the message length k as well as the block length n can be variable. The decoder permits 3-step pipelined processing based on the modified Euclid's algorithm(MEA). A new architecture for the MEA is designed for variable values of error correcting capability t. To maintain the throughput rate with less circuitry, the MEA block uses both the recursive and the overclocking technique. The decoder can decode a codeword received not only in a burst mode, but also in a continuous mode. It can be used in a wide range of applications due to its versatility. A versatile RS decoder over GF(2$^{8}$ ) having the error-correcting capability of up to 10 has been designed in VHDL, and successfully synthesized in an FPGA chip.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.890-893
• /
• 2008

In this paper, we present a low complexity modified multi-level sphere decoder (SD) for multiple-input multiple-output (MIMO) systems employing quadrature amplitude modulation (QAM) signals. The proposed decoder, exploiting the multi-level structure of the QAM signal scheme, first decomposes the high-level constellation into low-level 4-QAM constellations, so-called sub-constellations. Then, it deploys SD in the sub-constellations in parallel. In addition, in the searching stage, it uses the optimal low-complexity sort method. Computer simulation results show that the proposed decoder can provide near optimal maximum-likelihood (ML) performance while it significantly reduces the computational load.

• 센서학회지
• /
• 제24권3호
• /
• pp.188-193
• /
• 2015

This paper presents a new byte-wise BCH (4122, 4096, 2) decoder, which treats byte-wise parallel operations so as to enhance its throughput. In particular, we evaluate the parallel processing technique for the most time-consuming components such as syndrome generator and Chien search owing to the iterative operations. Even though a syndrome generator is based on the conventional LFSR architecture, it allows eight consecutive bit inputs in parallel and it treats them in a cycle. Thus, it can reduce the number of cycles that are needed. In addition, a Chien search eliminates the redundant operations to reduce the hardware complexity. The proposed BCH decoder is implemented with VHDL and it is verified using a Xilinx FPGA. From the simulation results, the proposed BCH decoder can enhance the throughput as 43% and it can reduce the hardware complexity as 67% compared to its counterpart employing parallel processing architecture.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1433-1442
• /
• 1998

The thesis presents a dual audio decoder which can decode both AC-3 and MPEG-2 bitstream. The MPEG-2 synthesis processi s optimized via FFT to establish the common data path with AC-'3s. A dual audio decoder consists of a DSP core which performs the control-intensive part of each algorithm and a common synthesis filter which perfomrs the computation-intensive part. All the components of the dual audio decoder have been described in VHDL and simulated with a SYNOPSYS tool. The software modeling of the DSP core was used for functional validation. After being synthesized using 0.6 .mu.m-3ML technology standard cell, the dual audio decoder was simulated at gate-level with a COMPASS tool for hardware validation.