• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.277-280
• /
• 2010

Network based on the OSI 7 Layer communication protocol is implemented, and the Internet TCP / IP Layer Based on the vulnerability is discovered and attacked. In this paper, using the programs on the network Layer Scanning conducted by the Layer-by each subsequent vulnerability analysis. Layer by Scanning each vulnerability analysis program to analyze the differences will be studied. Scanning for the studies in the program reflects the characteristics of the Scanning Features of way, and security countermeasures by each Layer is presented. The results of this study was to analyze its vulnerability to hackers and security for defense policy as the data is utilized to enhance the security of the network will contribute.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1940-1946
• /
• 2011

In this paper, we propose a method of schoolzone safety to the protection and management of accident and crime of school circumstance that it is increased recently. Hence, sensor network based intelligent monitoring module must be considered for schoolzone safety. It is not simple CCTV monitoring, but it means that the ability extension is proposed to monitor the dangerous situation for the risk management. Hence, this paper proposes the design of monitoring module considering various danger situations that can be occurred around the school.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.55-58
• /
• 2003

[ $YBa_2Cu_3Ox$ ](YBCO) oxide superconductor was prepared by sol-gel method to improve its superconducting properties, and it was made to be a fine powder, which has the same property of solid state reacted powder. $BaPbO_3$ was synthesized with $BaCO_3$, BaO, PbO, and $PbO_2$ and analyzed by XRD. YBCO superconductor was prepared by use of sol-gelled YBCO powder and additive $BaPbO_3$ and its critical temperature and transition temperature were shown as 91.9 K, 3.7 K respectively in case 20 wt.% $BaPbO_3$ was added to pure sol-gelled YBCO powder.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.109-122
• /
• 2002

The standard capacitor must have not only precise value of the capacitance but also the basic properties of low dielectric loss tangent. In the reforming process of capacitors, the dielectric loss tangent must be also reformed. In this paper, the development of standard capacitors of 10 and 100pF for the dielectric loss tangent standard using $Al_{2}O_{3}$ Crystal and the measurement of dielectric loss tangent are discussed. The dielectric loss tangent depends upon the surface between electrode and dielectric in capacitor. With using the Electric Field Simulator, precise design values of electrode are simulated. For the purpose of measuring capacitance effect just in the dielectric, 3-Terminal and 4-Terminal Pair configuration are applied respectively at the electrode and the connector for the measuring equipment. As stated above method, the standard capacitors of 10 and l00pF for the establishment of the dielectric loss tangent standard using the $Al_{2}O_{3}$ Crystal are made with low dielectric loss tangent less than 10-4.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.384-385
• /
• 2006

Olivine $LiFePO_4$ cathode materials were synthesized by hydrothermal reaction, and coated by carbon black. The powders were characterized by the X-ray diffraction. $LiFePO_4$/Li cells were characterized electrochemically by charge/discharge experiments and ac impedance spectroscopy. The result showed the discharge capacity of $LiFePO_4$/Li cell was 133 mAh/g at the first cycle, and 128 mAh/g at the 30th cycle, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.326-329
• /
• 2005

As a flexible method to fabricate sub-micrometer patterns, Focused Ion Beam (FIB) instrument and Self-Assembled Monolayer (SAM) resist are introduced in this work. FIB instrument is known to be a very precise processing machine that is able to fabricate micro-scale structures or patterns, and SAM is known as a good etch resistance resist material. If SAM is applied as a resist in FIB processing fur fabricating nano-scale patterns, there will be much benefit. For instance, low energy ion beam is only needed for machining SAM material selectively, since ultra thin SAM is very sensitive to $Ga^+$ ion beam irradiation. Also, minimized beam spot radius (sub-tens nanometer) can be applied to FIB processing. With the ultimate goal of optimizing nano-scale pattern fabrication process, interaction between SAM coated specimen and $Ga^+$ ion dose during FIB processing was observed. From the experimental results, adequate ion dose for machining SAM material was identified.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.11
• /
• pp.997-1005
• /
• 2015

In this study, modal analysis and equivalent static load analysis for valve supports of 26" gas piping in gas stations were conducted and the existing straight and inclined types of valve supports were compared using seismic performance testing. Also, a new valve support shape was suggested by optimizing position of fastener holes, width and thickness of the support, and size of bracket. Improvement in seismic performance by design optimization was verified through equivalent static load analysis. The seismic performance of the newly proposed valve support was greatly improved and the maximum displacement and maximum stress of the seismic load was about 20% lower than those of the existing valve support.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.34-45
• /
• 2021

On February 18, 2019, the Chinese government officially released the Outline of the Development Plan for the Guangdong-Hong Kong-Macao Greater Bay Area, which will lead the country in a new round of reform and opening-up. The Greater Bay Area will become a dynamic world-class city cluster, an international scientific and technological innovation center with global influence, an important support for the development of the "One Belt And One Road", a demonstration area for in-depth cooperation between the mainland and Hong Kong and Macao, and a high-quality living area for living, working and traveling. Non-Pearl River Delta(Non-PRD) cities in Guangdong Province are adjacent to the Guangdong-Hong Kong-Macao Greater Bay Area, so it is of practical significance to promote the high-quality development of urban tourism from an international perspective. Based on the panel data released in Guangdong Yearbook 2019, this paper uses the envelopment data analysis (DEA) method to explore ways to promote the high-quality tourism development of Non-PRD cities in Guangdong Province based on the perspective of international development.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.9-16
• /
• 2011

To develop a 6061 aluminum alloy with low residual stress and high tensile strength, a cryogenic treatment process was investigated. Compared to the conventional heat treatment process for precipitation hardening with artificial aging, the cryogenic treatment process has two additional steps. The first step is cryogenic quenching of the sample into liquid nitrogen, the second step is up-hill quenching of the sample into boiling water. The residual stress for the sample was measured by the $sin^2{\psi}$ method with X-ray diffraction. The 6061 aluminum alloy sample showed 67% relief in stress at the cryogenic treatment process with artificial aging at $175^{\circ}C$. From this study, it was found that the optimum cryogenic treatment process for a sample with low residual stress and high tensile strength is relatively low cooling speed in the cryogenic quenching step and a very high heating speed in the up-hill quenching step.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.123-124
• /
• 2021

본 연구의 목적은 SWP강화를 위한 교수법 개선 및 적용을 통해 교수자들 스스로 수업방식을 채택해보고 가지고 있는 경험과 노하우를 공유해 학습자 특성에 맞는 사회복지현장 실무형 수업방법을 적용하고 개선 방안을 모색하고자 하였다. 연구결과 첫째, 학습자 동기유발 적용 방안으로 복지현장의 유형별 사업 진행 모습 시청(유튜브 동영상), 사회복지현장의 실무자 초대 또는 인터뷰 영상, 복지현장에 진출한 선배와의 만남 등이 필요하다. 둘째, 학습자 참여 방안으로 복지현장에서 진행하는 행사 참여, 복지기관 홈페이지 또는 유튜브에 댓글(선플) 달기, 복지현장 탐방 또는 실무자와의 인터뷰 영상을 편집하여 제출하는 노력이 필요하다. 셋째, 상호작용 적용 방안으로 수업에 앞서 사회복지현장의 이야기를 다룬 기사, 에세이, 사진 등에 대한 소감으로 소통하는 방법과 SNS 토론(e-campus, 카카오톡 등)을 통해 복지현장에서 중요하게 다루어지는 이슈에 대한 토론 등 적용 방안이 필요하다.