• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.427-430
• /
• 2002

This paper has been studied a new geoelectric survey and instrunmentation using Low Frequency Electric Field .sensing Antenna. “Low Frequency Electric Field Sensing” is a technology in new method of survey to use array type antenna, the power of operation in antenna is using AC or DC pulse instead of DC current. The architecture of system embodied transceiver system using a microprocessor(PIC) of Microcllip Technology Inc. An array antenna design and il control transmission of antenna to use CDMA in this system. It is using array type antenna for the earth、earth's crust to survey explain from theory and experience.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.254-255
• /
• 2017

공진형 컨버터에서 일반적으로 소프트 스위칭과 같은 조건을 만족시키기 위해 주파수 제어를 많이 사용한다. 그러나 전계결합형 무선전력전송 시스템 특성상 이격 거리나 정렬 오차 정도 따라 송 수신부를 연결하는 링크 캐패시턴스 값이 민감하게 변한다. 이런 시스템에서는 공진 주파수 추종과 동시에 시비율 제어가 필요하다. 송신부 앞 또는 부하단에 dc/dc컨버터를 추가하는 2단 구성은 시스템 효율이 1단 구성에 비해 낮다는 단점이 있다. 따라서 본 논문에서는 무선전력전송 시스템에 비대칭 하프 브릿지를 사용하여 시비율 제어와 주파수 추종제어를 할 수 있는 구조를 제안한다. 이는 시뮬레이션을 이용하여 검증한다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.39-44
• /
• 2005

A broadband DC to 40 GHz 5-bit MMIC digital attenuator has been developed. The ultra broadband attenuator has been achieved by newly inserted the transmission lines in conventional Switched-T attenuator and the optimization of the transmission line parameters. Momentum was employed in design for an accurate performance prediction at high frequencies and Monte Carlo analysis was applied to verify performance stability against the MMIC process variation. The attenuator has been fabricated with 0.15 $\mu$m GaAs pHEMT process. This attenuator has 1 dB resolution and 23 dB dynamic range. High attenuation accuracy has been achieved over all attenuation range and full 40 GHz bandwidth with the reference state insertion loss of less than 6 dB at 20 GHz. The input and output return losses of the attenuator are better than 14 dB over all attenuation states and frequencies.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.249-254
• /
• 2008

In this paper, we demonstrate an electrically band-limited carrier-suppressed return-to-zero (EB-CSRZ) signal generator operating up to a 10 Gbps data rate comprising a single-stage Mach-Zehnder modulator and a wideband signal mixer. The wideband signal mixer comprises inverter stages, a mixing stage, and a gain amplifier. It is implemented by using a 0.13 ${\mu}m$ CMOS technology. Its transmission response shows a frequency range from DC to 6.4 GHz, and the isolation response between data and clock signals is about 21 dB at 6.4 GHz. Experimental results show optical spectral narrowing due to incorporating an electrical band-limiting filter and some waveform distortion due to bandwidth limitation by the filter. At 10 Gbps transmission, the chromatic dispersion tolerance of the EB-CSRZ signal is better than that of NRZ-modulated signal in single-mode fiber.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.107-109
• /
• 2008

Cheju-Haenam HVDC transmission system start it's commercial operation since 1998. JEJU island is supplied with it's about 45% of total electric power from main land with HVDC link. In JEJU island, the demand of electric power is growing every year. With a current power supply, electric power reserve rate will be below the recommended one. For a stable power supply to JEJU island, KEPCO start a construction of #2 HVDC transmission system. This report is for introduction and understanding of #2 HVDC system which will be installed between JEJU island and main land. This report includes a specification of converter station and DC cable. KEPCO expect that this system will solve the power supply problem and maximum wind power plant capacity problem as well.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.62-63
• /
• 2011

The wireless power transfer system using electromagnetic resonance is consists of PFC circuit, LLC resonant converter, high frequency DC-AC inverter and ECR devices for wirelessly transmitting the power. The output voltage of the module with free input voltage is 1MHz, 230Vp-p. As a experimental result, the wireless power transmission is confirmed and it is varified the validity of the experiment.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1499-1507
• /
• 2015

High voltage direct current transmission based on modular multilevel converter (MMC-HVDC) is one of the most promising power transmission technologies. In this study, the mathematical characteristics of MMC-HVDC are analyzed in a synchronous rotational reference frame. A hybrid current vector controller based on proportional integer plus resonant is used to uniformly control the DC and double-base frequency AC currents under unbalanced grid voltage conditions. A corresponding voltage dependent current order limiter is then designed to solve the overcurrent problems that may occur. Moreover, the circulating current sequence components are thoroughly examined and controlled using a developed circulating current suppressor. Simulation results verify the correctness and effectiveness of the proposed control schemes.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.547-548
• /
• 2015

In order to reduce error of the distance relay, we propose an improved fault locating scheme using DC offset removal filter. We were modeled 154 kV transmission system using ATP software in order to demonstrate the usefulness of proposed scheme, and applied to the proposed scheme using collected voltage signal and current signal by line-to-ground fault.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.300-303
• /
• 2003

The design rule for 8.5kV LTT was discussed here. An inherent integrated breakover diode (BOD) for self -protection function and multi-amplified gate (AG) for improved di/dt capability of LTT was introduced in principle. The trade-off between light triggering input source and high dV/dt limitation has been treated via narrow grooved P-base for gate design. Key process technology for LTT was given, too.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.218-224
• /
• 2005

Arthroscopy is a surgical procedure orthopedic surgeons use to visualize, diagnose and treat problems inside a joint. In usual, since the arthroscopic surgery is more accurate and minimally invasive than through 'open' surgery, the surgery of knee, shoulder, and wrist using auto-shaver is increasing in recent. However, repetitive use of arthroscopic-shaver may induce the second infection, hence the disposable arthroscopic-shaver should be developed. In this paper, a unique power transmission mechanism using DC motor, gear trains, and link mechanism is proposed for disposable arthroscopic-shaver and some test results of tissue cutting are introduced.