• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.888-893
• /
• 2000

This paper deals with the development of an automatic design software for DC servo motor control, which provides good performance with rapid response and velocity control accuracy. In the proposed method, the design is automatically executed using Matlab, and iterative learning control algorithms are used in the design process. We applied this method to 50W, 100W, 200W, 300W, 500W, 750W, 1.8kW and 4.5kW DC servo motors which are widely used in the industry. We compare the results of the manual tuning design method with that of the automatic design method presented in this paper. From the experimental results, we can find that the performance of the proposed method is better than that of the manual tuning design method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.195-200
• /
• 2003

An electric vehicle uses the system to a power source whether it limps a high efficiency, without environmental pollution It coincides the best at the 21th century environmental regulation and energy frugality. The motor control system using DC-DC converter is carried out in this study. The Present control system is structured the better condition than that of the AC-DC converter with DC-AC inverter. Further, a vehicle dynamics analysis is peformed for the case of Mini-Baja it is found that the analysis dynamic system for the Mini-Baja gives a good design parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.528-530
• /
• 1996

Because of the convenience of variable speed control and proportion of input current and torque, DC servo motor has been used as an actuator. With increasing development speed of robot and factory automation machinery, the actuator of excellent control characteristics is demanded. In this paper, The control characteristics of DC servo motor is tested by Fuzzy control with microprocessor and DC servo motor controller is designed for drive of the cartesian coordinate type robot. The control characteristics experimentation is realized to one axis position, two axes coordinate and circular motion control by experimental equipments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.17-19
• /
• 2001

In this paper, we constitute H/W systems for the accurate control of DC servo motor. This H/W systems are designed by applying a simple genetic algorithm (SGA) to the robust $H_{\infty}$ control system and the intelligent Fuzzy control system of DC motor, respectively. To verify the effectiveness of the proposed systems, the characteristics of this systems are analysed and simulated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2799-2801
• /
• 2000

Robust control for DC motor is needed according to the highest precision of industrial automation. However, when a motor control system with PID controller has an effect of load disturbance, it is very difficult to guarantee the robustness of control system. In this paper, PID-Expert hybrid control method for motor control system as a compensation method solving this problem is presented. If PID control system is stable, the Expert controller is idle. if the error hits the boundary of the constraint. the Expert controller begins operation to force the error back to the constraint set. The disturbance effect decrease remarkably, robust speed control of DC motor using PID-Expert Hybrid controller is demonstrated by the simulation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.395-402
• /
• 2000

This paper presents the improvement for speed characteristics of a Brushless DC Motor (BLDCM), it was applied to digital PI control for this. The practical PID control has been widely used to velocity control of DC motors. In this paper, a digital PI controller is used in order to decrease the speed error in constant velocity control of BLDCM. A TMS320C31 DSP is used for the microprocessor of digital PI control. The method using the DSP carry out the real-time control. The DSP has the rapid calculation ability and sampling time used lms. Driving BLDCM used 50W, motor input DC 150V and rotation speed 3000rpm. When BLDCM is to approval for discretion velocity at the acceleration and deceleration driving with any load, it was a feasible for stabilization control. Therefore, the experimental results indicate the superiority and validity of the velocity control by digital PI control.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.59-64
• /
• 2003

This paper presents a new rotor position estimation method for brushless DC motors. The estimation error of the rotor position clearly provokes the phase shift angle misaligned between the phase current and the back-EMF waveforms, which causes torque ripple in brushless DC motor drives. Such an estimation error can be reduced with the help of the proposed neutral-voltage-based estimation method, which is structured as a closed loop observer. A neutral voltage appearing during the normal mode of the inverter operation is found to be an observable and control table measure, which can be used for estimating an exact rotor position. This neutral voltage is obtained from the DC-link current, the switching logic, and the motor speed values. The proposed algorithm, which can be easily implemented by using a single DC-link current and the motor terminal voltage sensors, is verified by simulation and experiment results.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1560-1564
• /
• 2008

산업 자동화의 고정밀도에 따라 직류 전동기는 강인제어가 요구되고 있다. 하지만 PID 제어기를 갖는 전동기 제어 시스템이 부하 외란의 영향을 받게되면 제어 시스템의 강인제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 전동기 제어시스템을 위한 PID-자기동조 제어기법을 제시하였다. 만약 오차가 구속영역 내에 있고, 시스템이 안정한 상태에 있다면 자기동조는 사용되지 않고 PID 제어기만 동작한다. 자기동조 제어기는 오차가 구속 경계에 도달하게 되면 오차를 구속 영역내로 들어가도록 제어를 시작한다. PID-자기동조 제어 시스템의 오차가 시스템 설계자의 허용한도 내에서 유지되고 전체적으로 안정함을 증명하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1115-1119
• /
• 2007

Five control methods (Speed Control, PID Gain Scheduling, Loop Time Control, Simple PID, Switching Control) have been applied to the control of an Inline Co-axial valve by the simulation of AMESim. The simulation results have shown that the speed control method is the most stable and the fastest way to reach to the set point in the simulation of the flow control. Moreover, It has been found that the five control methods have the almost same characteristics in the power consumption, the counter electromotive force, and the motor angular velocity. According to the analysis results, the fast and stable control characteristics of the speed control method is the most suitable for the flow control using a inline co-axial valve with a DC(BLCD) motor.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.111-116
• /
• 1998

산업 자동화의 고정밀도에 따라 직류서보 전동기는 강인제어가 요구되고 있다. 하지만 PID 제어기를 갖는 전동기 제어 시스템이 부하 외란의 영향을 받게되면 제어 시스템의 강인제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로 본 논문에서는 전동기 제어시스템을 위한 PID-신경망 복합형 제어기법을 제시하였다. 신경망 제어기의 출력은 부하 외란 인가시에 발생되는 오차와 오차 변환율에 의해서 결정된다. 신경망 제어기를 이용한 직류서보 전동기의 강인제어는 시abf레이션에 의하여 확인하였다.