• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1444-1446
• /
• 2005

Recently most machineries have been small size and mobile type. And human body insertion type endoscope and micro robot technology has been developed. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC(BLDC) motor but because of small size there is no position sensor such as hall sensor. In this paper, a design and fabrication result of an ultra-small brushless DC motor is presented. This motor is designed to 3-phase coreless winding and operated with sensor-less type driver. Test results confirmed the feasibility of the proposed motor drive system design.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1273-1275
• /
• 2005

This paper presents design of speed control system for slot less iron-cored PM linear synchronous motor using space vector PWM. the design must be considered by the useable limits of the DC link voltage and dynamic operating rage as well as the characteristics of design parameters in a point of system. Therefore, in this paper, the permissible operating range of manufactured motor by determination of rate speed and rate thrust according to switching scheme of DC link voltage are offered. The vector control requires information about rotor position. And we can need to the Hall sensor for sampling current. In order to agree with this purpose, Digital Signal Processor(TMS320F240x) developed for implementation of a speed Field Oriented Control.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.46-48
• /
• 1998

In this paper, axial type double rotor brushless DC motor is designed where the rotor is located at the both sides of stator. The rotor uses rare-earth magnets of 16 poles and the stator has 12 coils. The genetic algorithm is used to optimize the efficiency of the designed motor. The characteristics of the design parameters are estimated by varying them for the maximum efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.333-336
• /
• 1997

In this paper, we present a nonlinear dynamic controller for position tracking of brushless dc motors. In constructing the controller, a backstepping-type approach is used under the condition of full state information, while an adaptive controller is adopted for parameter uncertainty throughout the entire electromechanical system. The nonlinear dynamic controller using the adaptive learning technique approach is shown to drive the state variables of system to the desired ones asymptotically and whose effectiveness is also sown via computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.736-739
• /
• 1997

In recent years, there has been a renewed interest in the BLDC motor as a research subject. In this paper we inspect sources of the torque ripple, which is one of the elements causing performance depreciation of BLDC motors. Based on the inspected sources of the torque ripple, feedforward compensation methods are proposed to reduce the size of torque ripple. The effectiveness of the proposed methods is verified with experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1257-1260
• /
• 1996

This paper describes a fully digitalized driver for BLDC motors and the driver is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to verify the effectiveness, an repetitive control method is adopted in the speed control tracking a periodic reference change in the BLDC motor system. The experimental results are shown for the reference tracking accurately according to the design parameter variation in the repetitive controller design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.368-371
• /
• 1996

This paper describes a study on the developments of the high power brushless DC(BLDC) servo system for electric gun/turret drive system. The servo control unit including the DSP based digital servo unit, power amplifier, signal conditioning circuit, internal power circuit is designed and implemented for driving the 10hp BLDC servo system. The developed system is applied to the gun/turret drive & stabilization simulator system and the control performance is verfied through the experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.512-516
• /
• 2001

It is recent trend that the manufactures of refrigerator use BLDC motor which RPM is changed by voltage of DC power, instead of induction motor in order to reduce energy consumption and noise radiation. It can be controlled two or more RPM suitable to environmental condition. For example it is operate much lower RPM than normal(usual) in the night. This paper introduce the method of noise control in the case of using BLDC Fan motor for refrigerator.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.332-336
• /
• 1998

Recently, the BLDC(Brushless DC) motor has been increasingly applied to home appliance and the study of BLDC motor drive is extensively processing, so it is necessary to investigate the characteristic of the BLDC motor drive. In this paper, we proposed the modeling of interior permanent - magnet BLDC motor drive. The state model of motor and the model of inverter using pulse width modulation are included. The modeling is verified by the experimental results.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.3-5
• /
• 2002

In this paper, we discuss an in-wheel motor for low-speed high-torque light transportation application. We present the design and fabrication results of an exterior type, brushless DC motor, and report the experimental results.