• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2073-2074
• /
• 2011

In this study, an algorithm for diagnosis of dc motor with winding open fault is suggested. A dc motor used in this paper, is consisted of a permanent magnet field stator, double 16-turn series winding rotating armature with 12-slot, brush and 12-commutator, etc. A current signal of dc motor which has brushes and commutatorswas considered for fault diagnosis. By commutation, this current signal shows different wave form according to the fault condition of the motor. In this study, operation of the data was easily through simplification of the current signal by the signal processing. Computation method is presented reference value($C_{dv}$) for diagnosis of winding open fault and verified through experiments that can be diagnosed using the reference value($C_{dv}$).

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.6-10
• /
• 2000

In this paper a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a low-pass prefilter the inverse dynamic model of a system and the PI controller. The low-pass prefilter prevents high frequency effects from the inverse dynamic model. The model is characterized by a nonlinear friction model. The PI controller regulates the error between the set-point and the system output which is caused by modeling error disturbances and variations f parameters. The parameters of the model and the PI controller are optimized offlinely by genetic algorithm. The experimental results on a DC motor system illustrate the performance of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.647-649
• /
• 2000

Brushless DC motors are widely used in many industrial fields as an actuator of robot and driving power motors of electrical vehicle. In this paper adaptive fuzzy sliding mode scheme is developed for velocity control of brushless DC motor. The proposed scheme does not require an accurate dynamic model. yet it guarantees asymptotic trajectory tracking despite torque variations. Numerical simulation and DSP-based experimental works for velocity control of brushless DC motor are carried out.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.133-135
• /
• 2006

This paper considers a speed control problem of DC motor under load variations. In order to reduce the effect of load variation, a disturbance observer has been designed for the given system. With a cheap encoder there exists considerable measurement noise in the velocity feedback and it should be reflected in designing the disturbance observer. The authors have obtained the nominal transfer function of a DC motor and designed a disturbance observer for the control purpose. With the disturbance observer a digital controller has been implemented using a DSP(TMS320F2812). Some experiments show the enhanced performance of the control system with the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.888-893
• /
• 2000

This paper deals with the development of an automatic design software for DC servo motor control, which provides good performance with rapid response and velocity control accuracy. In the proposed method, the design is automatically executed using Matlab, and iterative learning control algorithms are used in the design process. We applied this method to 50W, 100W, 200W, 300W, 500W, 750W, 1.8kW and 4.5kW DC servo motors which are widely used in the industry. We compare the results of the manual tuning design method with that of the automatic design method presented in this paper. From the experimental results, we can find that the performance of the proposed method is better than that of the manual tuning design method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.138-138
• /
• 2000

In this paper, a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a prefilter, the inverse dynamic model of a system and a fuzzy logic controller. The prefilter prevents high frequency effects from the inverse dynamic model. The model of the system is characterized by a nonlinear equation with coulomb friction. The fuzzy logic controller regulates the error between the set-point and the system output which may be caused by disturbances and it simultaneously traces the change o( the reference input. The parameters of the model are estimated by a genetic a]gorithm. An experimental work on a DC motor system is carried out to illustrate the performance of the proposed controller

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.60-70
• /
• 1998

A harmonic drive is compact torque transmission device with no backlash which is widely applied in industrial field to transmit torque precisely. However, one of the disadvantages of harmonic drives is the existence of mechanical flexibility caused by its structural properties, which imposes great limitation on designing precise controller This paper proposes a nonlinear controller for synchronous operation of DC servo-motors with harmonic drive, using Integrator Backstepping method. Furthermore, an alternative algorithm for serial type synchronous operation of multiple DC servo-motors is proposed. Simulation results by SIMULINK for proposed controller shows considerably small error and rapid approach to reference input, which can be adapted to industrial applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.675-678
• /
• 2002

A controller was designed generally using C or assembly languages on high-speed design controller. But, in this paper, DC servo controller is designed using the cord of the block-diagram of SIMTool. By the method, we can design, realized and analyzed a control system quickly in real-time. And we expect that the various plants of a robot vehicles are controled through the outside I/O board changing the structure of the block-diagram of SIMTool into AUTOTool. In addition, our developed system helps the most suitable automatic controller design and tester with hight-speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1019-1025
• /
• 2003

There are many kinds of seam trackers in the industrial welding field. We are proposed the contact seam tracking sensor applying strain gauges kind of contact sensor that mostly used in welding part now. For this seam tracking experiment, we made the strain gauges sensor by ourselves and tested how well the sensor tracks the seam. The experiment device consist of strain gauges sensor, amplifier circuit of strain gauges signal, saw wave generator, MOSFET power diving circuit and X-Y slide by moved DC motor. The tracking areas are X-Y planes(left, right, up and down) and the change of strain gauge resistance causes to move DC motor that connected to X-Y slide. As a result of experiment, we confirmed that the strain gauges sensor tracks a seam well, and X-Y slide DC motor was controlled by PWM control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.135-141
• /
• 2021

Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.