• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.702-708
• /
• 2018

3D printing technology is attracting increasing attention as a key technology of the fourth industrial revolution that can change the production paradigm of existing industries. The introduction of construction 3D printing technology has been slower than other industries because of the characteristics of the construction field. On the other hand construction automation using 3D printing is required to reduce the production population, as well as improve productivity and safety. In this study, a construction 3D printing work breakdown structure and link method to a standard estimation system were developed as a preliminary preparation for introducing 3D printing to construction. Based on expert consultation on construction and 3D printing, a hypothetical scenario was developed based on existing construction 3D printing technology. According to the scenario, 16 kinds of works required for 3D printing construction work were derived. The existing work breakdown structure and standard estimation system were analyzed, and the 3D printing work was linked. 3D printing works that were the same as the existing breakdown structure were found, and non-existent works were added to the similar breakdown structure. These results are expected to be helpful for future 3D printing construction management and cost estimation. The actual standard estimation system through 3D printing work will need to be calculated.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2003

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, we propose the image-based, 3D modeling system using calibrated stereo cameras. The proposed algorithm for rendering, 3D model consists of three steps, camera calibration, 3D reconstruction, and 3D registration step. In the camera calibration step, we estimate the camera matrix for the image aquisition camera. In the 3D reconstruction step, we calculate 3D coordinates using triangulation from corresponding points of the stereo image. In the 3D registration step, we estimate the transformation matrix that transforms individually reconstructed 3D coordinates to the reference coordinate to render the single 3D model. As shown the result, we generated relatively accurate 3D model.

• Digital Contents
• /
• no.2 s.117
• /
• pp.98-102
• /
• 2003

한국전자통신연구원(ETRI) 3D 게임엔진 '드림3D'의 기술 이전료가 인하됐다. ETRI는 3D 게임엔진 '드림3D'의 기술 이전료를 당초 계약금 6000만원에 러닝로열티 2%를 받기로 했던 방침을 수정, 계약금 4000만원에 러닝로열티 1%로 하향 조정했다. ETRI는 이를 위해 기술이전 후 '드림3D' 개발진에 피드백을 전달, 3D 게임엔진 개선에 공헌할 것을 기술 이전료 인하조건으로 제시했다. '드림3D'는 정부가 세계적인 게임엔진을 개발, 저렴한 가격에 국내 업체에 공급함으로써 국내 게임개발 환경을 한 단계 끌어올린다는 목표 아래 ETRI 과제수행업체로 선정, 2년 만에 개발 완료한 '3D온라인 게임엔진'이다

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.375-382
• /
• 2004

Lately, 3D GIS begins to be widely used in many application fields. In this research, we proposed a survey and analysis result of research trends for 3D GIS technologies-acquisition of 3D spatial data, 3D features structuring, 3D visualization, data query, and transmission etc. The result is expected to give the helpful information for constructing research road-map on development of 3D GIS technologies.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.776-779
• /
• 2002

본 논문에서는 OpenGL을 이용한 삼차원 뷰어(Viewer)를 개발한다. 3D Max와 같은 3D 개발 툴에서 침대, 소파 등 3D 모델 라이브러리를 제작한 후 일어들이는 렌더링 모듈을 개발한다. 3D 모델 라이브러리에 직물 이미지 라이브러리를 매핑하는 모듈도 개발하여 직물 이미지와 유사한 효과를 낼 수 있도록 한다. 3D max에서 광원과 질감을 포함하여 렌더링한 후 개발되는 프로그램으로 데이터 손실없이 읽어들이는 것을 목표로 한다. 3차원 모델에 설계된 직물 이미지를 사용하여 3D 매핑된 후. 사용자가 확대, 축소, 이동, 회전 등의 효과를 줄 수 있게 하는 사용자 인터페이스 제공 및 3D 애니메이션 기능을 구현한다.

• Journal of Information Technology and Architecture
• /
• v.11 no.4
• /
• pp.495-504
• /
• 2014

This paper present a strategy of intellectual property acquisition and core technology development direction using analysis of 2D to 3D video conversion technology patent data. As a result of analysis of trends in patent 2D to 3D technology, it is very promising technology field. Using a strategic patent map using research of patent trend, you will keep ahead of the competition in 2D3D image data conversion market.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.205-208
• /
• 2015

3D 입체영상을 제작하기 위해서는 2D 영상제작에 비해 오랜 제작 기간과 많은 비용이 발생한다. 비용 절감을 위해 기존의 2D 영상을 3D 입체영상으로 변환하는 연구가 진행되고 있다. 2D 영상을 3D 입체영상으로 변환하는 방식은 자동변환방법과 수동변환방법으로 구분할 수 있으며, 고품질의 2D-3D 변환 영상을 획득하기 위해서는 깊이정보 지도(Depth map chart)를 활용한 수동변환 방법을 많이 사용되고 있다. 하지만 2D-3D 수동변환에 사용되는 깊이정보 지도의 정량적 분석 데이터가 부족하여 사용자가 변환한 이미지에 대한 정확한 기준 깊이값 설정이 어려운 단점이 있다. 본 논문에서는 깊이정보 지도의 깊이값 정보에 대한 정량적 분석 데이터를 바탕으로 한 2D-3D 수동변환 변화범위를 제시함으로써 적정한 영상 변화를 유도할 수 있도록 한다.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.285-292
• /
• 2016

Three-dimensional (3D) printing is driving major innovation in various areas including engineering, manufacturing, art, education and biosciences such as biochemical engineering, tissue engineering and regenerative medicine. Recent advances have enabled 3D printing of biocompatible materials, cells and supporting components into complex 3D functional tissues. Compared with non-biological printing, 3D bioprinting involves additional complexities which require the integration of technologies from the fields of biochemical engineering, biomaterial sciences, cell biology, physics, pharmaceutics and medical science.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.181-191
• /
• 2009

To investigate the genetic variation of high-and low-molecular-weight glutenin subunits (BMW-GS and LMW-GS), granule-bound starch synthase I (GBSSI) and puroindoline in 24 Korean wheat cultivars. At the BMW-GS compositions, three Glu-A1 alleles, five Glu-B1 alleles and three Glu-D1 alleles were identified. The high frequency of alleles at each locus was Glu-A1c allele (15 cultivars), Glu-B1b allele (16 cultivars) and Glu-D1f allele (16 cultivars). Four alleles were identified at the Glu-A3 and Glu-B3 loci and three at Glu-D3 locus and Glu-A3d, Glu-B3d and Glu-D3a were mainly found at each Glu-3 locus. Glu-A3d, Glu-B3d, Glu-D3b or c (4 cultivars, respectively) and Glu-A3d, Glu-B3d, Glu-D3a and Glu-A3c, Glu-B3d or h, Glu-D3a (3 cultivar, respectively) were predominantly found in Korean wheats. At the GBSS compositions, 2 waxy wheat cultivars, Shinmichal and Shinmichal1, showed null alleles on the Wx loci and other cultivars were wild type in GBSS compositions. At the puroindoline gene compositions, Korean wheat cultivars carried 3 genotypes, which 10 cultivars (41.7%) were Pina-D1a and Pinb-D1a, 11 cultivars (45.8%) had Pina-D1a and Pinb-D1b and 3 cultivars (12.5%) carried Pina-D1b and Pinb-D1a. These genetic variations could present the information to improve flour and end-use quality in Korean wheat breeding programs.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.106-109
• /
• 2006

Over the years, many researches have been performed to create 3D digital maps. Nevertheless, it is still time-consuming and involves a high cost because a large part of 3D digital mapping is conducted manually. To compensate this limitation, we propose methodologies to represent 3D objects as 3D symbols and locate these symbols into a base map automatically. First of all, we constructed the 3D symbol library to represent 3D objects as 3D symbols. In the 3D symbol library, the attribute and geometry information are stored, which defines factors related to the types of symbols and related to the shapes respectively. These factors were used to match 3D objects and 3D symbols. For automatic mapping of 3D symbols into a base map, we used predefined parameters such as the size, the height, the rotation angle and the center of gravity of 3D objects which are extracted from Light Detection and Ranging (LIDAR) data and 2D digital maps. Finally, the 3D map in urban area was constructed and the mapping results were tested using aerial photos as reference data. Through this research, we can identify that the developed the algorithms can be used as effective techniques for 3D digital cartographic techniques