• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2014

Petroglyphs is an essential part of the worldwide cultural heritage since it plays a key role for the comprehension of prehistoric communities previous to writing. nowadays 3D data are a critical component to permanently record the form of important cultural heritage so that they might be passed down to future generations. Recent 3D scanning technologies allow the generation of very realistic 3D model that can be used for multimedia museum exhibitions to attract the users into the 3D world. In this paper, we develop the 3D petroglyph VR contents based on a novel gesture recognition method. The proposed gesture recognition method can recognizes the movements of the user using 3D depth sensor by comparing with the pre-defined movements. Also this paper presents new approaches for 3D petroglyphs data recording using 3D scanning technology as accurate and non-destructive tools.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.204-207
• /
• 2011

본 논문에서는 3DTV 의 입체감 향상을 위한 3D 음향의 원근감 재현 기술을 제안한다. 먼저, 3D 영상 객체의 깊이를 추출하고 영상 객체의 깊이에 따라 오디오 객체의 거리감을 조절한다. 오디오 거리감 재현을 위해 필요한 오디오 깊이 인자는 3D 영상의 좌/우 이미지의 차이 정보로부터 오디오에 맞도록 비선형 변환을 통해 구해진다. 3D 오디오 재현 알고리즘은 기존의 서라운드 입체음향 기술과 원근감 재현 기술로 구성된다. 원근감 재현 기술은 추정된 오디오 깊이 인자에 따라 신호크기, 초기 반사음, 근거리 머리전달함수, 위상 제어를 통해서 구현된다. 특히, 3D 영상 객체가 화면 앞으로 튀어 나올 때 소리도 튀어나오도록 함으로써 3D 영상 객체와 연동되는 입체 음향을 효과를 통해 3D 방송 시청 시 오디오/비디오 입체감을 향상시켜준다. 상용화된 3DTV 를 활용하여 음질 평가 전문가들의 주관 청취 평가를 통해 제안한 원근감 재현 기술이 3D 방송 시청에 적합함을 검증한다.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.210-218
• /
• 2009

The 3D shape as well as the depth of an object presented on a 3D display is perceptually distorted depending on viewing distance. It is quite undesirable that different observers perceive different depth and shape from an object displayed on a 3D monitor. To resolve the problem of perceptual distortion of 3D depth and shape, the degree of the distortion should be measured appropriately. As a basis for resolving these problems, the present research suggests an instrument for measuring the degree of the perceptual distortion of 3D depth and shape.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2037-2042
• /
• 2012

Synthetic aperture integral imaging is one of promising 3D imaging techniques to capture the high-resolution elemental images using multiple cameras. In this paper, we propose a method of displaying 3D images in space using the synthetic aperture integral imaging technique. Since the elemental images captured from SAII cannot be directly used to display 3D images in an integral imaging display system, we first extract the depth map from elemental images and then transform them to novel elemental images for 3D image display. The newly generated elemental images are displayed on a display panel to generate 3D images in space. To show the usefulness of the proposed method, we carry out the preliminary experiments using a 3D toy object and present the experimental results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.177-182
• /
• 2015

Nevertheless 3D printer is propagated fast, it is difficult for us of using 3D printer at the same time because of 3D printer's slow velocity. Existing solution is to print using SD card which moves files and on PC but this method is spend too much time and can not be showed status of printing. Yet we have no 3D printer software solution which is controlled and printed remotely. Therefore, this 3D printer software solution makes 3D printer be connected on internet networks and selected to use it on smart App. And it is controlled and printed remotely. In my paper, to build an Android App. which can execute these functions, an effective analysis & design using UML and implementation method will be presented.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.751-758
• /
• 2008

The purpose of this study is to implement 3D Face Model, which resembles a user, using 3D Graphic techniques. The implemented 3D Face model is used to further study and implement 3D Facial Aesthetic Surgery System, that can be used to increase the satisfaction rate of patient by comparing before and after facial aesthetic surgery. For designing and implementing 3D Facial Aesthetic Surgery System, 3D Modeling, Texture Mapping for skin, Database system for facial data are studied and implemented independently. The Detailed Adjustment System is, also, implemented for reflecting the minute description of face. The implemented 3D Facial Aesthetic Surgery System for this paper shows more accuacy, convenience, and satisfaction in compare with the existing system.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.272-281
• /
• 2020

Three-dimensional (3D) selfie services, one of the major 3D printing services, print 3D models of an individual's face via scanning. However, most of these services require expensive full-color supporting 3D printers. The high cost of such printers poses a challenge in launching a variety of 3D printing application services. This paper presents a stencil-based 3D facial relief creation method employing a low-cost RGBD sensor and a 3D printer. Stencil-based 3D facial relief is an artwork in which some parts are holes, similar to that in a stencil, and other parts stand out, as in a relief. The proposed method creates a new type of relief by combining the existing stencil techniques and relief techniques. As a result, the 3D printed product resembles a two-colored object rather than a one-colored object even when a monochrome 3D printer is used. Unlike existing personalization-based 3D printing services, the proposed method enables the printing and delivery of products to customers in a short period of time. Experimental results reveal that, compared to existing 3D selfie products printed by monochrome 3D printers, our products have a higher degree of similarity and are more profitable.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.532-533
• /
• 2020

원격 및 가상환경에서 사용자의 동작에 따른 3D 모델을 제공하기 위해 light detection and range (LiDAR)로 측정된 3D point cloud로 사용자의 3D 모델이 생성되어 원격 및 가상환경에 사용자의 모습이 제공된다. 하지만 3D 모델을 생성하기 위해서는 사용자의 신체 전부가 측정된 3D point cloud가 필요하다. 사용자의 신체 전체를 측정하기 위해서는 적어도 두 개 이상의 LiDAR가 필요하다. 두 개 이상의 LiDAR을 사용할 경우에는 LiDAR을 사용할 공간과 LiDAR를 구비하기 위한 비용이 발생한다. 단일 LiDAR로 3D 모델을 생성하는 방법이 요구된다. 본 논문에서는 단일 LiDAR에서 측정된 3D point cloud를 이용하여 3D 모델을 생성하는 방법이 제안된다. End-to-End 기반 Convolutional Neural Network (CNN) 모델로 측정된 3D point cloud를 분석하여 사용자의 체형과 자세를 예측하도록 학습한다. 기본자세를 취하는 동안 수집된 3D point cloud로 기본이 되는 사용자의 3D 모델을 생성한다. 학습된 CNN 모델을 통하여 측정된 3D point cloud로 사용자의 자세를 예측하여 기본이 되는 3D 모델을 수정하여 3D 모델을 제공한다.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.335-341
• /
• 2018

This paper is a study on map contents to be embedded in a new type of mobile device that combines 2D information and 3D information by combining 2D information with augmented reality technology. We also describe the planning and production of a 3D map application called 'NSU AR Map' using Unity3D engine to help understand this paper. 'NSU AR Map' is a map application that enables accurate identification of user's location and real-world view through 360 View. Based on the experience gained during the process of 3D map application, this paper will present how 3D technologies and augmented reality technologies are applied to new map applications and how they can be developed in the future.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.479-486
• /
• 2016

In this paper, the algorithm which can convert a 2D image into a 3D Model will be discussed. The 2D picture drawn by a user is scanned for image processing. The Canny algorithm is employed to find the contour. The waterfront algorithm is proposed to find foreground image area. The foreground area is segmented to decompose the complex shapes into simple shapes. Then, simple segmented foreground image is converted into 3D model to become a complex 3D model. The 3D conversion formular used in this paper is also discussed. The generated 3D model data will be useful for 3D animation and other 3D contents creation.