• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.99-109
• /
• 2007

A cracked composite specimen, comprised of an epoxy and an aluminium plate, was fractured under a tensile load. In this paper, two crack configurations were investigated. The first was an artificial center crack positioned in the epoxy plate parallel to the material interface. The other was for two edge cracks in the epoxy plate, again, parallel to the interface. A tensile test was carried out by gradually increasing the applied load and it was verified that the cracks always moved suddenly in an outward direction from the interface. The d/a ratio was gradually reduced to zero, and it was confirmed that the maximum stress intensity factor value for the artificial center crack, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface crack,$K_{{\theta}{\theta}}^{ifc\;max}$ (where: 2a is the crack length and d is the offset between the crack and interface). The same phenomenon was also verified for the edge cracks. Specifically, when the offset, d, was reduced to zero, the maximum stress intensity factor value, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface edge crack.

• Korean Journal of Mathematics
• /
• 제21권4호
• /
• pp.365-374
• /
• 2013

Let $k=\mathbb{F}_q(T)$ be a rational function field over the finite field $\mathbb{F}_q$, where q is a power of an odd prime number, and $\mathbb{A}=\mathbb{F}_q[T]$. Let ${\gamma}$ be a generator of $\mathbb{F}^*_q$. Let $\mathcal{H}_n$ be the subset of $\mathbb{A}$ consisting of monic square-free polynomials of degree n. In this paper we obtain an asymptotic formula for the mean value of $L(1,{\chi}_{\gamma}{\small{D}})$ and calculate the average value of the ideal class number $h_{\gamma}\small{D}$ when the average is taken over $D{\in}\mathcal{H}_{2g+2}$.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.641-648
• /
• 2014

This paper presents the design considerations and analysis for an interleaved boundary conduction mode power factor correction buck converter. A thorough analysis of the harmonic content of the AC line current is presented to examine the allowable voltage gain (K value) for meeting the EN61000-3-2, Class D standard while maximizing efficiency. The results of the harmonic analysis are used to derive the required value of K and therefore the output voltage necessary to meet the class D requirements for a given AC line voltage. The discussed design consideration and harmonic current analysis are verified on a 300W universal line experimental prototype converter with an 80V output. The measured efficiencies remain above 96% down to 20% of the full load. The input current harmonics also meet the IEC61000-3-2 (class D) standard.

• 한국식품위생안전성학회지
• /
• 제29권3호
• /
• pp.217-222
• /
• 2014

본 연구는 20% ortho-phenylphenol을 함유한 훈증소독제, Fumagari $OPP^{(R)}$의 Clostridium perfringens (C. perfringens) 아포에 대한 살아포 효과를 평가하기 위해, French standard NF T 72-281에 따라 수행하였다. 배양 현탁액 중 C. perfringens의 아포수(N 값), 훈증소독제에 노출된 각 담체의 아포수(n1, n2, n3), 평판배지법에 의한 시험 아포 현탁액 중 아포수(N1), 여과법에 의한 시험 아포 현탁액 중 아포수(N2), 그리고 대조 담체의 회복 아포의 평균값(T 값)을 예비실험을 통해 구하였다. 또한, 훈증소독제에 노출된 C. perfringens의 감소 아포수(d 값)는, T 값, 회복액 중 아포수의 평균값(n'1) 그리고 배지의 담체에서 증식한 아포수의 평균값(n'2) 등을 이용하여 산출하였다. N 값은 $4.4{\times}10^7spores/mL$이었으며, n1, n2, n3은 각각 0.5N1, 0.5N2, 0.5N1 보다 높게 나타났다. 그리고 T 값은 $4.9{\times}10^5spores/carrier$이었다. 훈증소독제의 살아포 효과에 있어서, d 값은 4.52 이었다. 훈증소독제에 대한 프랑스 기준에 따르면, 효과적인 살균력을 갖는 훈증소독제의 d 값이 3 이상이어야 하는 것으로 규정하고 있다. 본 연구의 결과로부터, Fumagari $OPP^{(R)}$는 C. perfringens 아포에 대해 높은 살아포 효과를 갖는 것으로 나타나, 병원성 세균의 아포로 오염된 식품재료와 주방기기의 소독에 적용할 수 있을 것으로 사료된다.

• 한국식품위생안전성학회지
• /
• 제28권4호
• /
• pp.349-353
• /
• 2013

본 연구는 20% ortho-phenylphenol을 함유한 훈증소독제, Fumagari OPP$^{(R)}$의 Staphylococcus aureus (S. aureus)에 대한 살균효과를 평가하기 위해, French standard NF T 72-281에 따라 수행하였다. 배양 현탁액 중 S. aureus의 균수 (N 값), 훈증소독제에 노출된 각 담체의 균수 (n1, n2, n3), 평판배지법에 의한 시험균주 현탁액 중 균수 (N1), 여과법에 의한 시험균주 현탁액 중 균수 (N2), 그리고 대조담체의 회복 균수의 평균값 (T 값)을 예비실험을 통해 구하였다. 또한, 훈증소독제에 노출된 S. aureus의 감소 균수 (d 값)는, T 값, 회복액 중 균수의 평균값 (n'1) 그리고 배지의 담체에서 증식한 균수의 평균값 (n'2) 등을 이용하여 산출하였다. N 값은 $4.0{\times}10^8$ CFU/mL이었으며, n1, n2, n3은 각각 0.5N1, 0.5N2, 0.5N1 보다 높게 나타났다. 그리고 T값은 $3.4{\times}10^6$ CFU/mL이었다. 훈증소독제의 살균효과에 있어서, d 값은 6.43 logCFU/mL이었다. 훈증소독제에 대한 프랑스 기준에 따르면, 효과적인 살균력을 갖는 훈증소독제의 d 값이 5 logCFU/mL 이상이어야 하는 것으로 규정하고 있다. 본 연구의 결과로부터, Fumagari OPP$^{(R)}$는 S. aureus에 대해 높은 살균효과를 갖는 것으로 나타나, 병원성 세균으로 오염된 식품재료와 주방기기의 소독에 적용할 수 있을 것으로 사료된다.

• International Journal of Human Ecology
• /
• 제12권1호
• /
• pp.87-99
• /
• 2011

Purpose- The purpose of this study was to compare the fit of two prototype liquid cooled vests using a 3D body scanner and accompanying software. The objectives of this study were to obtain quantitative measurements of ease values, and to use these data to evaluate the fit of two cooling vests in active positions and to develop methodological protocol to resolve alignment issues between the scans using software designed for the alignment of 3D objects. Design/methodology/approach- Garment treatments and body positions were two independent variables with three levels each. Quantitative dataset were dependent variables, and were manipulated in 3x3 factorial designs with repeated measures. Scan images from eight subjects were used and ease values were obtained to compare the fit. Two different types of analyses were conducted in order to compare the fit using t-test; those were radial mean distance value analysis and radial distance distribution rate analysis. Findings- Overall prototype II achieved a closer fit than prototype I with both analyses. These were consistent results with findings from a previous study that used a different approach for evaluation. Research limitations/implications- The main findings can be used as practical feedback for prototype modification/selection in the design process, making use of 3D body scanner as an evaluation tool. Originality/value- Methodological protocols that were devised to eliminate potential sources of errors can contribute to application of data from 3D body scanners.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.686-693
• /
• 2000

Biomass yield, nutritive value and nutrient utilization efficiency of different genera of duckweed (DW, Lemnaceae) under the same nutritional and management conditions were studied. Three genera of DW namely: Lemna perpusilla, Spirodela polyrhiza and Woljfia arrhiza, were cultivated in 18 plastic sinks each of $59{\times}54{\times}35cm^3$ size. Each sink contained approximately 80 L of water and was charged once with 6.648 kg of anaerobically fermented cow dung effluent. The seed rate for Spirodela, Lemna and Wolffia were 600, 400 and $600g/m^2$ respectively. Duckweed were harvested at 48 hours intervals. Media total N concentration for Lemna and Wolffia gradually increased with time. Growth of duckweed was measured by subtracting the inoculum from the total biomass production. Growth of Spirodela ceased within 4 days but Lemna and Wolffia continue to grow up to 34 days. Bio-mass yield was significantly (p<0.05) higher in Wolffia (906 kg/ha/d) than Lemna (631 kg/ha/d). Dry matter (DM) yield was very similar in Lemna (14.80 kg/ha/d) and Wolffia (14.57 kg/ha/d). The N content was non-significant higher in Lemna (5.45%) than Wolffia (5.00%) and Spirodela (4.6%). The crude protein (CP, $N{\times}6.25$) yield was non-significantly higher in Lemna (4.83 kg/ha/d) than Wolffia (4.32 kg/ha/d). The acid detergent fibre (ADF) content was the highest in Wolffia (28.59%), followed by Spirodela (19.47%) and Lemna (12.39%). Utilization efficiency of CP was 273 and 314% respectively for Wolffia and Lemna. However, similar efficiency values for Spirodela was only 1.5%. Considering the bio-mass yield, nutritive value and nutrient utilization efficiency, production performance of DW were in the order of Lemna>Wolffia>Spirodela under the present experimental conditions.

• The Journal of Advanced Prosthodontics
• /
• 제14권2호
• /
• pp.70-77
• /
• 2022

PURPOSE. This study evaluated screw loosening and 3D crown displacement after cyclic loading of implant-supported incisor crowns cemented with original titanium bases or with three compatible, nonoriginal components. MATERIALS AND METHODS. A total of 32 dental implants were divided into four groups (n = 8 each): Group 1 used original titanium bases, while Groups 2-4 used compatible components. The reverse torque value (RTV) was evaluated prior to and after cyclic loading (1,200,000 cycles). Samples (prior to and after cyclic loading) were scanned with a microcomputed tomography (micro-CT). Preload and postload files were superimposed by 3D inspection software, and 3D crown displacement analysis was performed using root-mean-square (RMS) values. All datasets were analyzed using one-way ANOVA and Tukey's post hoc analysis. RESULTS. Significant variations were observed in the postload RTV, depending on the titanium base brand (P < .001). The mean postload RTVs were significantly higher in Groups 1 and 2 than in the other study groups. While evaluating 3D crown displacement, the lowest mean RMS value was shown in the original Group 1, with the highest RMS value occurring in Group 4. CONCLUSION. Within the limitations of this in vitro study and under the implemented conditions, it was concluded that the manufacturer brand of the titanium base significantly influenced screw loosening following the fatigue test and influenced 3D crown displacement after cyclic loading.

• Journal of Plant Biotechnology
• /
• 제31권2호
• /
• pp.169-173
• /
• 2004

유소직 세포들은 aldose인 D-glucose ketose인 D-fructose에 대하여 다른 능동 수송계를 소유하고 있었다. D-glucose와 D-fructose 수송계의 $K_{m}$ 값은 각각 0.28 mM과 15.02mM이었다. D-mannose는 $K_{m}$ 값이 0.44 mM로 D-glucose와 유사하였지만, 그러나 D-glucose와는 다른 수송계를 소유하고 있었다. L-glucose도 고유한 수송계를 통하여 세포내로 수송되었으며, 그러나 그 기능을 전혀 알지 못하고 있다. 유조직 원형질체는 단당류 능동 수송계만을 소유하고, 이당류인 sucrose능동 수송계는 소유하지 않고 있었다. 발달 초기단계에 있는 사부 원형질체는 glucose와 sucrose 수송계를 동시에 소유하고 있었다. 완전히 발달된 사부세포에서는 이미 존재하였던 glucose 능동 수송계는 사라지고, 새로 유도된 sucrose 능동 수송계만 존재하는 것으로 측정되었다.

• 한국전자파학회논문지
• /
• 제18권9호
• /
• pp.1030-1038
• /
• 2007

본 논문에서는 유럽에서 사용되는 GSM-900/GSM-1800 대 역 에 대 한 전자파 강도 측정 결과를 제시한다. 측정결과, 부산 기장군 장안읍 기룡 마을과 철마면 소산벌 두 곳이 후보지로 선정되었다. 두 후보지에서 수직 편파가 수평 편파보다 약 12 dBm이 더 높았으며, 번화가보다 25 dBm 낮게 측정되었다. 셀룰러/GSM-900 대역에서 측정한 수직 편파의 강도의 최대값은 각각 기룡 마을에서 -65 dBm, 소산벌에서 -69 dBm이다. PCS/GSM-1800 대역에서의 결과로는 각각 기룡 마을이 최고 -90.5 dBm, 소산벌은 -85 dBm이다. 두 후보지에서 수신된 전자파 강도가 -65 dBm 이하로 매우 약하다는 것을 확인하였으며, GSM 주파수 대역의 신호가 기존 시스템에 간섭 영향을 끼치지 않아 GSM 모바일 필드 테스트를 위한 적합한 장소로 사료된다.