• 한국식품과학회지
• /
• 제53권2호
• /
• pp.174-180
• /
• 2021

본 연구는 국내산 복분자와 오디의 활용도를 높이고 고품질의 환을 개발하기 위해 복분자 가루, 오디 가루, 비타민 C 세 가지 재료가 복분자-오디 환의 항산화 특성에 미치는 영향을 조사하기 위해 혼합물 설계법 중 D-optimal mixture design을 이용하였다. 독립변수인 복분자 가루, 오디 가루 및 비타민 C 함량에 따라 복분자-오디 환의 총 페놀 및 플라보노이드 함량, FRAP이 linear 모델, DPPH 라디컬 소거활성은 quadratic 모델로 결정되었으며 회귀식은 p-value의 값이 각각 0.0481, <0.0001, <0.0001 및 0.0387로 유의성이 인정되었다. 총 페놀 함량은 비타민 C 첨가량에 영향을 크게 받았지만 복분자 가루 및 오디 가루 첨가량이 부정적인 영향을 주지 않는 것으로 나타났다. 총 플라보노이드 함량은 복분자 가루의 함량이 증가할수록 크게 높아지는 것으로 나타났다. DPPH 라디컬 소거활성은 비타민 C 첨가량이 높을수록 증가하였으며, 복분자 가루의 첨가량이 너무 낮아지면 감소하는 것으로 나타났다. FRAP 활성은 비타민 C와 오디가루 첨가량이 긍정적인 영향을 주는 것으로 드러났다. 이러한 결과와 desirability를 바탕으로 두 개의 복분자-오디 환 배합비가 가능할 것으로 도출되었지만 이 둘 중에서 Formulation 1 (복분자 가루 35%, 오디가루 10%, 비타민 C 10%)이 desirability가 0.8 이상으로 제품 품질이 적합하고 우수하여 최적 배합 비율로 설정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1085-1086
• /
• 2011

This paper proposes a structure optimal design of 2-phase BLDC motor. In order to improve the characteristics of the BLDC motor such as the efficiency, average torque, the Kriging method and genetic algorithm are utilized. In addition, the result of the optimal model were compared with the initial model and verified by 2D FEM.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.168-173
• /
• 1987

The optimal Input design problem for linear system Which have the common parameters in the system and noise transfer functions. Exploiting the assumed Model structure and deriving the information matrix structure in detail, D-optimal open-loop stochastic input can be realized as an ARMA process under the Input or output variance constraints. In spite of the reduced order, It Is necessary to develop an efficient algorithms for the optimation with respect to the .rho..

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.224-226
• /
• 1997

This paper describes a procedure for the optimal design of induction motor for electric vehicle. The immune algorithm is applicated for the optimal solution search. To verify the validity of the proposed method, a example disign for output 20[kw] is performed.

• 방송공학회논문지
• /
• 제4권2호
• /
• pp.164-175
• /
• 1999

본 논문에서는 QPSK 디지틀 전송 기술을 사용하는 위성방송 전송 시스템에 대한 위성 채널 특성과 전송 신호 특성에 대한 영향을 분석하여 전송 시스템의 설계 기준점을 결정할 수 있도록 하였다. 전송 채널 특성에 의한 열화도는 약 2.0dB, 전송 신호 스펙트럼 특성에 의한 열화는 0.4dB, 그리고 수신기 특성에 대해 약 0.2dB의 열화 특성을 갖는 위성 및 전송 시스템에 대한 가용 설계 파라미터 값들을 제안하였다. 열화 특성을 만족하는 설계 파라미터 값들은 ${\pm}\;0.5dB$ 이내의 진폭 응답 특성 그리고 0.1nsec/MHz, $0.2sec/MHz^2$ 이내의 전파 지연 특성을 나타내었다. 또한, 최대 서비스 가용도를 갖는 위성 전송 시스템의 TWTA 동작은 0dB OBO가 적당하며, 위상 잡음 영향을 최소화하기 위해서는 0.707 damping 계수 및 40kHz 대역폭을 갖는 PLL 회로가 최적의 동작 특성을 나타내었다. 본 논문의 시스템 성능 분석 및 설계 파라미터 값들은 위성을 통한 고속 데이터 전송 시스템에 대한 설계 기준점으로 활용될 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.483-503
• /
• 2015

This paper analyzes the optimal user density and power allocation for Device-to-Device (D2D) communication underlaying cellular networks on multiple bands with the target of maximizing the D2D transmission capacity. The entire network is modeled by Poisson point process (PPP) which based on stochastic geometry. Then in order to ensure the outage probabilities of both cellular and D2D communication, a sum capacity optimization problem for D2D system on multiple bands is proposed. Using convex optimization, the optimal D2D density is obtained in closed-form when the D2D transmission power is determined. Next the optimal D2D transmission power is obtained in closed-form when the D2D density is fixed. Based on the former two conclusions, an iterative algorithm for the optimal D2D density and power allocation on multiple bands is proposed. Finally, the simulation results not only demonstrate the D2D performance, density and power on each band are constrained by cellular communication as well as the interference of the entire system, but also verifies the superiority of the proposed algorithm over sorting-based and removal algorithms.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권5호
• /
• pp.325-331
• /
• 2004

The multiobjective optimization (MO) problem usually includes the conflicting objectives and the use of conventional optimization algorithms for MO problem does not so good approach to obtain an effective optimal solution. In this paper, genetic algorithm (GA) as an effective method is used to solve such MO problem of brushless DC motor (BLDCM). 3D equivalent magnetic circuit network (EMCN) method which enables us to reduce the computational burden is also used to consider the 3D structure of BLDCM. In order to effectively obtain a set of Pareto optimal solutions in MO problem, ranking method proposed by Fonseca is applied. The objective functions are decrease of cogging torque and increase of torque respectively. The airgap length, teeth width and magnetization angle of PM are selected for the design variables. The experimental results are also shown to confirm the validity of the optimization results.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.166-171
• /
• 2015

In this study, an automation tool was developed for rapid evaluation of machine tool spindle designs with automated three-dimensional finite element analysis (3D FEA) using solid elements. The tool performs FEA with the minimum data of point coordinates to define the section of the spindle shaft and bearing positions. Using object-oriented programming techniques, the tool was implemented in the programming environment of a CAD system to make use of its objects. Its modules were constructed with the objects to generate the geometric model and then to convert it into the FE model of 3D solid elements at the workbenches of the CAD system using the point data. Graphic user interfaces were developed to allow users to interact with the tool. This tool is helpful for identification of a near optimal design of the spindle based on, for example, stiffness with multiple design changes and then FEAs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.723-724
• /
• 2006

In this study, superconducting coil arrangements and cryostat concept design were conducted for the development of 13.2kV/630A bifilar winding type high temperature superconducting(HTS) fault current limiter(FCL) with YBCO coated conductor(CC) wire. The coil consists of several layers with unique non-inductive solenoid winding method. Six types of HTS coil arrangements were investigated for the optimal insulation design of HTS FCL. And, conceptual design of cryostat was conducted for the decrement of thermal invasion and the prevention of low voltage insulation breakdown in the LHe which is used as pressurization gas in sub-cooling condition of liquid nitrogen(LN2). As the results, it was found that the modified suspended type cryostat with horizontal coil arrangement is beneficial to the insulation design of 13.2kV level bifilar winding type HTS FCL.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.111-116
• /
• 2000

In this paper, we presented a new algebraic iterative algorithm for the optimal control of the nonlinear systems. The algorithm is based on tow steps. The first step transforms optimal control problem into a sequence of linear optimal control problem using the quasilinearization method. In the second step, TPB(two point boundary condition problem) is solved by algebraic equations instead of differential equations using BPF(block pulse functions). The proposed algorithm is simple and efficient in computation for the optimal control of nonlinear systems. In computer simulation, the algorithm was verified through the optimal control design of Van del pole system and Volterra Predatory-prey system.